What are the requirements for the reliability of new energy vehicles?

How to Turn Off the Engine Oil Warning Light?

Here are the methods to turn off the engine oil warning light: 1. If the oil pressure indicator light comes on after starting the engine, do not continue driving. First, check the oil dipstick to see if the oil level is normal, and add oil if necessary; 2. If the oil warning light comes on while driving, find a safe place to stop and check the oil level. If it is normal, you can continue driving to the nearest 4S store for inspection, but drive slowly and carefully; 3. If the oil warning light on the vehicle's dashboard comes on and the car can still be driven normally, but symptoms such as shaking or lack of acceleration power occur, continuing to drive will increase engine wear. It is recommended to call for roadside assistance.

13

1

Share

How to Activate Hazard Warning Lights for Subject 3?

When encountering a vehicle malfunction during road driving and unable to move to a safe area promptly, immediately activate the hazard warning lights. If a vehicle malfunctions on the highway, it should be parked in the emergency stopping lane, and the hazard warning lights should be turned on promptly. When towing a malfunctioning motor vehicle, as the vehicle is in an abnormal state, both the towing vehicle and the towed vehicle should simultaneously activate the hazard warning lights.

17

5

Share

How to Start a Car with One-Key Start?

One-key start car tutorial: 1. After the driver sits in the driver's seat, press the start button once, at this time the ACC light will turn on, then press it once more, and the vehicle will perform a self-check; 2. Depress the brake pedal and press the one-key start button to ignite and start the engine; 3. Release the foot brake, you can choose to warm up the car in place; 4. Depress the foot brake again, shift to D gear, and release the handbrake; 5. Slowly release the foot brake, add some throttle, and the start is complete. If the engine stalls during vehicle movement, you can restart the engine by shifting the gear lever to the N position and pressing the one-key start button without depressing the brake pedal.

14

1

Share

Which material is better for spark plugs?

Iridium spark plugs are better, mainly for the following reasons: 1. Their high melting point allows them to be used in various high-power engines, tolerating higher temperatures without electrode melting or burning out. 2. Their high hardness enables the electrodes to be made thinner. Thinner electrodes provide more concentrated ignition, stronger energy, and more stable spark paths, effectively improving combustion efficiency and effectiveness. Additional benefits of iridium spark plugs include: 1. Enhanced performance: Sufficient ignition energy and stable spark points increase output power and improve dynamic performance. 2. Smooth operation: Excellent combustion and strong explosive power boost engine speed, making the engine run more smoothly. 3. Quick ignition: Low ignition voltage and reduced electrical suppression enable faster ignition. 4. Fuel savings: Good combustion conditions and high instantaneous output power allow for lower fuel consumption while maintaining the same output power.

18

3

Share

Does the Buick Excelle have a headlight cleaning function?

The Buick Excelle series does not come equipped with a headlight cleaning function. To achieve this feature, post-purchase modifications are required, typically available at 4S dealerships. This function helps maintain optimal headlight performance. Relevant information about automotive headlight cleaning devices is as follows: 1. Headlight cleaning devices are primarily used on vehicles with xenon headlights. This is because xenon lights have extremely high brightness, which can impair the vision of oncoming drivers, hence xenon headlights are usually equipped with lenses. 2. Automotive headlight cleaning devices ensure sufficient illumination and provide drivers with clear visibility. During nighttime or low-light driving conditions, rain and dust can reduce headlight illumination by up to 90%, significantly impairing the driver's vision and posing substantial safety risks.

4

2

Share

What does 'setup' mean on a car?

Setup on a car refers to the settings. It can be used to adjust the display information on the vehicle's dashboard or some functions of the car, and it is commonly found on the dashboard or the car's multimedia system. It is usually located below the central knob. Here is some additional information: 1. Concept of central control panel buttons: The buttons on the car's central control panel are used to control comfort and entertainment devices such as the car's air conditioning and audio system. 2. Coverage: The air conditioning control panel is typically operated using buttons or knobs, but now some car models feature a large touch screen on the central control panel, which basically covers the adjustment of basic car comfort and entertainment functions.

16

2

Share

What are the requirements for the reliability of new energy vehicles?

How to Turn Off the Engine Oil Warning Light?

How to Activate Hazard Warning Lights for Subject 3?

How to Start a Car with One-Key Start?

Which material is better for spark plugs?

Does the Buick Excelle have a headlight cleaning function?

What does 'setup' mean on a car?

How to Open the Fuel Tank Cap Inside the Cadillac ATS?

How to Check If You Have a Driver's License on Traffic Management 12123 After Passing Subject 4?

What to Do If the Subject One Test is Always Under Processing?

How to Pass Safely When Driving a Vehicle in This Situation?