What are the requirements for the Class B driver's license test?

1 Answers
SadieDella
07/29/25 8:43pm
B2 driver's license requires a minimum age of 20 years old. The relevant introduction about upgrading the driver's license is as follows: Conditions for upgrading from Class C to Class B: The requirement for upgrading from Class C to B2 driver's license is to hold a Class C license for more than one year, and there must be no record of being deducted 12 points in the most recent scoring cycle before the upgrade. The requirement for upgrading from Class C to B1 license is to have held a Class C driver's license for more than three years, with no record of being deducted 12 points in the two most recent consecutive scoring cycles before the upgrade, no record of drunk driving, and no record of being primarily or fully responsible for a fatal accident. The age must be between 21 and 50 years old. Conditions for upgrading from Class B to Class A: The requirements for upgrading from Class B to Class A are similar to those for upgrading from Class C to Class B. Upgrading to A3 requires holding a Class B license for more than one year, upgrading to A2 requires holding it for more than three years, and upgrading to A1 requires holding it for more than five years. There are also requirements that the deduction of points does not exceed 12 points within the corresponding period.
Was this review help?
17
1
Share
More Forum Discussions

How Many Cylinders Does the 2016 Lingpai Engine Have?

2016 Lingpai's engine is a four-cylinder engine, produced by Dongfeng Honda's engine factory, and is a domestically manufactured engine. The engine model for the 2016 Lingpai is P10A3, with a maximum horsepower of 136 hp, a maximum power of 100 kW, and a maximum torque of 169 Nm. For daily maintenance of the 2016 Lingpai engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil volume moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
2
Share

What is Automotive Grade?

Automotive grade refers to a set of automotive standards that comply with the legislative regulations on automotive standards in various countries, which may differ from one country to another. The following are the specific control aspects of automotive grade: 1. Signal processing and control logic: Automotive-grade control units specifically handle CAN bus information and control logic to ensure reliable system operation. 2. Audio and video file decoding: Decoding of high-definition audio and video hardware, decoding of audio and video files, as well as adjustments to the sound field of front and rear seats and the balance between left and right positions. 3. Vehicle driving records: It is compatible with the original vehicle's CAN bus protocol and wiring harness, matches the original vehicle's protocol, supports the original vehicle's steering wheel controls, and correctly displays vehicle driving information. 4. Positioning and navigation: Fast positioning and navigation to support the installation of gyroscope functionality. EMC electromagnetic compatibility performance must meet standards, among others.
17
3
Share

Can Points Be Deducted After Registering Someone Else's Vehicle?

When handling traffic violations for a non-personally owned vehicle, you need to bring your own ID card, the vehicle's registration certificate, as well as the driver's license and ID card of the violator to the traffic management department's violation handling window. Below is extended information regarding severe violation point deductions: 1. Severe Violations: A single violation resulting in a full 12-point deduction is considered severe and cannot be split between two driver's licenses. If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management authorities will confiscate their driver's license. 2. Repeated Severe Violations: If 12 points have already been deducted within a scoring cycle and another violation occurs, points will still be deducted. If it's a severe violation, another 12 points will be deducted. Within a scoring cycle, if 12 points are deducted, the driver must retake the subject one exam. If 24 points are reached, not only must subject one be retaken, but subject three must also be retaken.
11
0
Share

What to Do When the Vios Cigarette Lighter is Broken?

If the cigarette lighter in your Vios is broken, simply replace it. Common incorrect usage methods for cigarette lighters include: 1. Not unplugging external devices during startup: External devices connected to the cigarette lighter are prone to burning out due to the impact of high startup current when the vehicle starts; 2. Not unplugging external devices when turning off the engine; 3. Wiggling during plugging and unplugging: Wiggling during insertion and removal can deform the curved spring of the external device's plug, leading to looseness after insertion, poor contact, and affecting conductivity. The Vios is an entry-level family car designed and developed by Toyota, with body dimensions of 4410mm in length, 1700mm in width, and 1490mm in height, and a wheelbase of 2550mm. In terms of power, the Vios is equipped with an NR series engine, delivering a maximum power of 79 kW and a maximum torque of 140 Nm. The transmission system is paired with a 5-speed manual gearbox from Aisin and an optimized 4-speed automatic transmission.
18
0
Share

How to Remove the Taillight of a Cruze?

Method for removing the taillight of a Cruze: 1. Open the trunk and remove the interior trim panel on the side of the taillight; 2. Locate the screws securing the taillight and remove them. The taillight is installed at the rear of the vehicle, typically with a red main body color. It primarily includes red lights to warn following vehicles and amber lights for directional indication, as well as reverse lights for auxiliary visibility. The Cruze is a compact car designed and built by General Motors, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. In terms of power, the Cruze is equipped with two engines: a 1.5L and a 1.4T, with maximum power outputs of 114 horsepower and 150 horsepower, respectively. The 1.4T model is paired with a 7-speed dual-clutch transmission, while the 1.5L model comes with a 6-speed automatic transmission and a 6-speed manual transmission.
2
3
Share

What are the steps to disassemble the Oshan X7 key fob cover?

The steps to disassemble the Oshan X7 key fob cover are: 1. Press the small dot on the front of the key fob and remove the mechanical key; 2. Insert the mechanical key into the key fob and pry it open with force; 3. After opening, you will see a small plastic cover on the circuit board, open the small cover to see the circuit board; 4. The battery is under the circuit board, use a tool to pry it out as well. The Oshan X7 is the first compact SUV from Changan Oshan, with a body length, width, and height of 4705mm, 1860mm, and 1720mm respectively, and a wheelbase of 2780mm. In terms of power, the Oshan X7 is equipped with a 1.5T GDI engine, with a maximum power of 178 horsepower and a maximum torque of 265 Nm, paired with a wet 7DCT automatic transmission.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.