What are the requirements for taking the second and third driving test subjects consecutively?

1 Answers
VanAbel
07/29/25 10:38pm
After passing the first subject, you can schedule the second subject and the third subject (road test) simultaneously. Once the appointment is successful, you can take the tests consecutively. Below are some tips for the third subject test: 1. Follow the instructions: Listen carefully to the voice prompts during the third subject test and act accordingly. Remember not to perform any actions before the voice prompt ends; always wait until the prompt is complete before proceeding to the next step. 2. Pay attention to special zones: In many areas, voice prompts no longer remind candidates of special zones such as school zones, bus stops, and crosswalks. However, candidates must still perform corresponding deceleration or yielding actions based on the project signs and road markings. For school zones, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For bus stops, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For crosswalks, decelerate by applying the brakes within 30 meters before the crosswalk, and stop to yield if pedestrians are crossing.
Was this review help?
13
3
Share
More Forum Discussions

What are the four wires of a motorcycle ignition switch?

Motorcycle ignition switch has four wires: positive input, positive output, negative power supply, and kill switch wire. The following details these four wires: 1. Red wire: positive input, the thin wire with a fuse coming from the battery. 2. Black wire: positive output controlled by the key, forming a closed circuit with the red wire to supply power to all vehicle electrical components. 3. Green wire: negative power supply. 4. Black/white wire: kill switch wire controlled by the key, forming a closed circuit with the green wire to control the ignition system for engine shutdown.
13
5
Share

What is the fuel consumption of the Hyundai Verna?

Hyundai Verna's fuel consumption is 6.1 liters per 100 kilometers. Here are the detailed specifications: 1. Powertrain: Equipped with a 1.4L naturally aspirated engine, delivering a maximum power of 70kW and peak torque of 132N·m. Paired with a 5-speed manual or 4-speed automatic transmission, compliant with China VI emission standards. 2. Dimensions: Measures 4300/1705/1460mm in length/width/height, with a wheelbase of 2570mm and a trunk capacity of 475L. New features include vehicle stability control system, tire pressure monitoring system, and a power sunroof.
8
5
Share

What does APS in the car mean?

APS in the car stands for Accelerator Pedal Sensor. Here is the related introduction about the accelerator pedal: 1. Function: The accelerator pedal, also known as the throttle pedal, primarily controls the opening of the engine throttle, thereby regulating the engine's power output. Traditional accelerator pedals are connected to the throttle via a throttle cable or linkage. 2. Working Principle: Electronic throttle accelerator pedals are equipped with displacement sensors. When the driver presses the accelerator pedal, the ECU collects the opening changes and acceleration from the displacement sensor on the pedal. Based on preset algorithms, it determines the driver's intent and then sends corresponding control signals to the engine throttle control motor, thereby adjusting the engine's power output.
12
3
Share

Where is the Crown fuel relay located?

The Crown fuel relay is located under the dashboard on the lower left side of the driver, in the same box as the fuse. It consists of a magnetic circuit system, contact system, and a reset mechanism. The Crown's body dimensions are: 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm and a fuel tank capacity of 70 liters. The front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 235 PS, a maximum power of 173 kW, and a maximum torque of 350 Nm, paired with an 8-speed automatic transmission.
7
4
Share

How to adjust the time on Dongfeng Honda CR-V?

Dongfeng Honda CR-V time adjustment method is: 1. Press the vehicle's one-touch start button to power on the vehicle; 2. Press the menu switch button on the left side of the multifunction steering wheel to bring up the time adjustment function; 3. Use the res and set buttons on the right side of the multifunction steering wheel to adjust the time display; 4. Press the enter button on the left side of the multifunction steering wheel to confirm the time setting. Taking the 2017 Dongfeng Honda CR-V as an example, it is positioned as a compact SUV with body dimensions of: length 4585mm, width 1855mm, height 1679mm, wheelbase 2660mm, and body weight 1659kg.
19
0
Share

What does SUV stand for in sedans?

SUV stands for Sports Utility Vehicle, also known as Suburban Utility Vehicle. Below is relevant information about SUVs: Models: The world's top SUVs are represented by the American Jeep Grand Cherokee, the British Range Rover, and the German Mercedes-Benz G-Class, which have become symbols of the affluent class. Product Features: SUVs are characterized by strong power, off-road capability, spacious comfort, and excellent cargo and passenger capacity. Some say that an SUV combines the comfort of a luxury sedan with the nature of an off-road vehicle. SUVs are a hybrid descendant of sedans and off-road vehicles, offering greater advantages compared to their predecessors.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.