What are the requirements for ride-hailing services?

What are the differences between the BMW X1 and X2?

The BMW X1 is a domestically produced vehicle manufactured by BMW Brilliance, while the BMW X2 is an imported model with a more sporty orientation. Here are the relevant details: 1. Dimensions and Style: Both the BMW X2 and BMW X1 are products of the same platform, with similar dimensions and design layouts, but differing in stylistic details. The X2 appears wider and flatter, emphasizing a sportier aesthetic, whereas the X1 is taller and longer, prioritizing interior space. 2. Tires: Differences are also evident in tire configurations. The X2 is equipped with tires designed for high-performance sporty handling, while the X1 features tires focused on quietness and comfort.

5

Share

How to Replace the Air Filter in a Volvo XC60?

Steps to replace the air filter in a Volvo XC60: 1. Remove the clips located at the front of the passenger side in the engine compartment, then take out the sound insulation cotton. 2. After removing the sound insulation cotton, reach inside to take out the baffle, then reach in again to remove the air filter. 3. Finally, install the new air filter. The following are the functions of the air filter: 1. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air. 2. It can strongly and persistently absorb moisture, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. 3. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 4. It effectively sterilizes and deodorizes, keeping the cabin air clean and free from bacterial growth, creating a healthy environment. 5. It effectively separates solid impurities such as dust, powder, and grinding particles from the air.

8

5

Share

What are the advantages of Wuling Hongguang?

The advantages of Wuling Hongguang are: 1. Spacious interior with high practicality; 2. Good off-road capability and durability. Below is more information about this vehicle: 1. Taking the 2020 Wuling Hongguang as an example, it belongs to the microvan category with body dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, a wheelbase of 2720mm, a fuel tank capacity of 50 liters, and a curb weight of 1185kg. 2. The 2020 Wuling Hongguang features a MacPherson strut front suspension and a leaf spring rear suspension. It is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 76PS, a maximum power of 56kW, and a maximum torque of 110Nm, paired with a 5-speed manual transmission.

19

0

Share

Under what circumstances should a straight-going vehicle yield to a turning vehicle?

Circumstances where a straight-going vehicle should yield to a turning vehicle are as follows: If the driver encounters a yield sign while driving, even when entering the intersection in a straight-going manner, they must yield to vehicles merging or turning from other intersections; At intersections with traffic lights, if the right-side vehicle's direction has turned red, but vehicles within the intersection have not completely passed through, and the straight-going lane on this side has a green light, the vehicles that entered the intersection first should be allowed to proceed; For vehicles exiting from the main road to the auxiliary road, compared to vehicles traveling on the auxiliary road, their right-side blind spots are larger due to the obstruction of the main-auxiliary road divider, making it difficult to observe the path of auxiliary road vehicles. Additionally, although the speed of vehicles exiting the main road is decreasing, it remains relatively high, which can easily lead to severe traffic accidents. Therefore, auxiliary road vehicles must yield to main road vehicles; On urban main roads, some auxiliary road entrances merging into the main road will have merging lanes with turning guides, and there will also be corresponding guide lanes before the entrance to direct main road vehicles to yield to vehicles entering from the front. If a vehicle proceeds straight into the guide lane and collides with an auxiliary road vehicle turning into the main road, the vehicle that entered the guide lane will bear full responsibility; When traveling in the same direction, the vehicle in front has the right of way over the vehicle behind. Therefore, whether the front vehicle is turning or making a U-turn, it has priority over the straight-going vehicle behind. According to the Road Traffic Safety Law, when the front vehicle is turning left or making a U-turn, the rear vehicle is prohibited from overtaking.

11

1

Share

Where is the fuel tank switch located on the Lynk & Co 03?

Near the driver's seat, there is a fuel tank symbol indicating the location of the fuel tank cover switch. After unlocking the car, simply press the fuel tank cover to open it. Below are some precautions for refueling: 1. Mixing gasoline: Some vehicles have higher requirements for gasoline. In fact, mixing gasoline has minimal short-term effects, except that lower-grade gasoline has higher detonation properties, with little other impact. Gasoline grades vary, and each type has different component ratios, leading to performance differences. Therefore, always check the gasoline grade before refueling. 2. Adding fuel after the pump stops: At gas stations, staff often add a little more fuel to round up the total cost after the tank is full. However, in summer, fuel expands due to high temperatures. 3. Fuel additives: Gas station staff often recommend adding fuel additives during refueling. However, fuel additives cannot fundamentally solve engine carbon deposit issues, so it's best to avoid them.

15

3

Share

Do I need to be present in person to replace a motorcycle license?

Replacement of a motorcycle license does not require the owner to be present in person; it can also be entrusted to someone else to handle on their behalf. Additional information: The following documents are required for license replacement: 1. "Motor Vehicle Registration Business Process Record Form" (with engine and chassis imprints and photos attached on the back); 2. "Motor Vehicle Registration/Transfer Registration Form"; 3. "Application Form for Replacement or Reissuance of Motor Vehicle License Plates and Certificates"; 4. "Motor Vehicle Registration Certificate"; 5. Copy of the owner's identity proof (for company vehicles, this refers to the business license and organization code certificate; for private vehicles, it refers to the ID card, with the original verified by the file-checking window); 6. Three vehicle photos; 7. Power of attorney and the identity proof of the authorized person.

11

5

Share

What are the requirements for ride-hailing services?

What are the differences between the BMW X1 and X2?

How to Replace the Air Filter in a Volvo XC60?

What are the advantages of Wuling Hongguang?

Under what circumstances should a straight-going vehicle yield to a turning vehicle?

Where is the fuel tank switch located on the Lynk & Co 03?

Do I need to be present in person to replace a motorcycle license?

Where is the air conditioning filter located on the Soueast V3 Lingyue?

Does a new car need to run on the highway to stretch its legs?

Where is the Air Conditioning Filter Located in a Land Rover Discovery?

What is the function of the brake in Zhonghua V3?