What are the requirements for purchasing a Hongqi H9?

Do Newly Replaced Tubeless Tires Require Tire Sealant?

Generally, newly replaced tubeless tires do not require tire sealant if the installation is done correctly. Tire sealant is primarily used as a temporary fix after a tire puncture. Introduction to Tubeless Tires: Tubeless tires, also known as "low-pressure tires" or "pneumatic tires," are inflatable tires without an inner tube. They feature high elasticity, wear resistance, excellent traction, and heat dissipation performance. They are increasingly used in bicycles, motorcycles, cars, buses, and trucks. Introduction to Tire Sealant: Tire sealant is a mixture containing various high-molecular chemical materials, widely suitable for rubber tires on electric vehicles, motorcycles, and small to medium-sized cars. It is particularly effective for punctures with diameters of about 1 to 5 millimeters and is an essential item to carry in the vehicle.

8

3

Share

What is the charging principle of lithium batteries?

The charging of lithium batteries is based on their structural characteristics. Below is relevant information about lithium batteries: 1. Discharging of lithium batteries: Due to the internal structure of lithium batteries, during discharge, not all lithium ions can move to the positive electrode. Some lithium ions must remain in the negative electrode to ensure smooth embedding channels for lithium ions during the next charge. Otherwise, the battery's lifespan will be shortened accordingly. To ensure that some lithium ions remain in the graphite layer after discharge, the discharge termination minimum voltage must be strictly limited, meaning lithium batteries cannot be over-discharged. The discharge termination voltage is typically 3.0V per cell and should not be lower than 2.5V per cell. The duration of battery discharge depends on the battery capacity and the discharge current. Battery discharge time (hours) = battery capacity / discharge current. The discharge current (mA) of a lithium battery should not exceed three times the battery capacity (e.g., for a 1000mAH battery, the discharge current should be strictly controlled within 3A). Otherwise, the battery may be damaged. 2. Protection circuit of lithium batteries: It consists of two field-effect transistors and a dedicated protection integrated block S--8232. The overcharge control transistor FET2 and the over-discharge control transistor FET1 are connected in series in the circuit. The protection IC monitors the battery voltage and controls it. When the battery voltage rises to 4.2V, the overcharge protection transistor FET1 cuts off, stopping the charge. To prevent false triggering, a delay capacitor is usually added to the external circuit. When the battery is in a discharged state and the voltage drops to 2.55V, the over-discharge control transistor FET1 cuts off, stopping power supply to the load. Overcurrent protection occurs when a large current flows through the load, controlling FET1 to cut off and stop discharging to the load, aiming to protect the battery and the field-effect transistors.

2

3

Share

What does engine ECT mean?

The ECT in a car is the transmission electronic control mode switch, which can quickly increase the engine speed, but fuel consumption will increase significantly. It is mostly used on highways. The working condition of ECT is as follows: After activation, the throttle will feel more responsive and direct, and the shift timing is generally above 4500 RPM. When the ECT switch is turned off, the transmission will switch to economy mode, where the transmission's shift logic will determine the shift timing based on the actual road conditions and the driver's intention. Correct usage of the ECT switch: When the ECT switch is pressed while the car is moving, the car can automatically downshift. For example, when going downhill, the car's speed may become too fast, and frequent braking may cause faults in the braking system, leading to wear on the brake discs and pads. Pressing this button will make the car automatically downshift and drive at a lower speed. When activated, green English letters will light up on the dashboard, and the transmission will delay shifting, which helps maintain the RPM. This mode will have a certain impact on the car's fuel consumption and may lead to increased fuel usage.

4

3

Share

Is a Steering Wheel Cover Necessary for a New Car?

Whether a new car needs a steering wheel cover depends on the material of the steering wheel and the frequency of vehicle use. Material of the Steering Wheel: If the car's steering wheel is made of hard plastic, it is necessary to install a steering wheel cover. If the steering wheel is made of soft rubber, you can choose to install one or not. Vehicle Usage: If the car is used frequently, installing a steering wheel cover is advisable to protect the wheel from wear and tear. If the car is not used often, the installation is optional. Introduction to Steering Wheels: The main functions of a steering wheel cover are to prevent slipping and wear. Most high-end cars now come with redesigned steering wheels that are pre-wrapped with materials like faux leather, genuine leather, or other materials. Therefore, whether to install a steering wheel cover depends on the original material and design of the steering wheel.

15

2

Share

What Causes Excessive Smoke in a Four-Cylinder Diesel Engine?

When a four-cylinder diesel engine operates under heavy load, the forces acting on all moving components increase, leading to greater deformation of the cylinder bore. If the piston rings cannot accommodate this deformation, engine oil may leak into the combustion chamber, resulting in excessive smoke. Solution: Use high-quality engine oil. Engine oil is highly susceptible to corrosion and aging under prolonged high-temperature conditions, causing the oil film to thin and making it easier for oil to enter the combustion chamber and participate in combustion. Therefore, using high-quality engine oil can significantly delay this phenomenon. Common Diesel Engine Faults: In daily use of diesel engines, some common faults directly affect the engine's service life and production efficiency. These include reduced engine power or black smoke emissions, oil leakage from the compressor end seal ring, and abnormal noises in the diesel engine.

14

1

Share

Can a motorcycle be registered if the factory plate is missing?

A motorcycle cannot be registered if the factory plate is missing. The dealer must contact the manufacturer to reissue the factory plate before registration can proceed. Location of motorcycle plates: The position of the plate varies depending on the brand and model of the motorcycle. For most standard motorcycles, the plate is located at the front of the frame, on the left or right side of the steering column (in front of the fuel tank). For underbone motorcycles, the plate may be located on the frame under the footboard or under the seat, depending on the specific model. Documents required for motorcycle registration: The original and a copy of the purchaser's second-generation ID card; the purchase invoice (the name on the invoice must match the name on the provided ID card); the original certificates for the vehicle purchase tax and compulsory third-party liability insurance; the original certificate of conformity for the new motorcycle and the imprint of the engine number and frame number.

2

5

Share

What are the requirements for purchasing a Hongqi H9?

Do Newly Replaced Tubeless Tires Require Tire Sealant?

What is the charging principle of lithium batteries?

What does engine ECT mean?

Is a Steering Wheel Cover Necessary for a New Car?

What Causes Excessive Smoke in a Four-Cylinder Diesel Engine?

Can a motorcycle be registered if the factory plate is missing?

What to Do When Car Tires Are Underinflated?

Can You Make a U-Turn at an Intersection Where Left Turns Are Prohibited?

What is a Shelby car?

How to Check the Vehicle Annual Inspection Date?