What are the requirements for parallel parking?

2 Answers
VanBrandon
07/29/25 12:41am
The parallel parking test requires the vehicle to be moved into the right-side parking space through one forward and one reverse movement without touching or scraping the parking space poles, and without the wheels pressing or touching the lane boundary lines or the parking space boundary lines. The vehicle should be straight, and the wheels should be aligned. Below is an introduction to parallel parking: 1. Parking space length: 1.5 times the vehicle length plus 1 meter; parking space width: vehicle width plus 80 centimeters; lane width: 1.5 times the vehicle width plus 80 centimeters. 2. Parallel parking technique: After the vehicle starts from the starting point, turn the head to the right rear door small window position to see pole No. 1, then turn the steering wheel all the way to the right. After turning the steering wheel fully, look at the left rearview mirror until the body of the car is aligned with pole No. 4, then turn the steering wheel back to the straight position. Watch the left rearview mirror and reverse the car until the left rear wheel is exactly in the middle of the line, then turn the steering wheel all the way to the left.
Was this review help?
5
2
Share
MacLyla
08/12/25 4:53am
When I was learning to drive, parallel parking was a key part of the driving test, with many requirements. First, you need to find a suitable parking space, ensuring there's about half a meter of space between the cars in front and behind—too far and you can't park, too close and you risk scratching the car. When reversing, turn on the indicator to alert the car behind, and move slowly without rushing. The angle is crucial—usually, when reversing into a spot, turn the wheels to about 45 degrees before straightening them. Remember to check the mirrors and blind spots frequently to ensure no people or obstacles are present. Beginners often run over the line or hit the curb, but a few more practice sessions will help—try practicing in an empty lot in your neighborhood. Be extra careful in bad weather, like when rain makes the brakes slippery; it's best to scan the surroundings before parking. Safety first—after parking, always engage the handbrake to prevent rolling. It's all about experience—now I can park in one go without struggling for half an hour.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Can the Rear Seats of the Regal Lie Flat?

The rear seats of the Regal can lie flat. Regal Powertrain: The 1.5T engine delivers a maximum power of 125kW (170PS) and a peak torque of 252Nm. Regal Features: Standard equipment includes a 4.2-inch LCD instrument panel, while mid-to-high trim models also offer an 8-inch full-color trip computer display combined with dual analog gauges, exuding a high-tech feel. An 8-inch central touchscreen is standard across the lineup, with support for both Baidu CarLife and Apple CarPlay. Excluding the base model, all other trims also feature the OnStar Full-Time Online Assistant, enabling convenient functions such as remote start, vehicle status checks, and navigation destination downloads via a mobile app. Regal Exterior: The model showcases distinct family styling cues, with an elongated body profile. The front grille and LED daytime running lights incorporate wing-shaped elements, while higher trims are equipped with Matrix LED headlights that automatically adjust the beam range based on oncoming traffic and driving conditions.
17
1
Share

What are the symptoms of a faulty tensioner pulley in the Teana?

The symptoms of a faulty tensioner pulley are as follows: The greater the power, the louder the abnormal noise: If the tensioner pulley is damaged, there will be noise at 1400-1500 RPM, and the noise will be louder when more power is consumed. Increased resonance and noise: If the tensioner pulley is damaged, the resonance will be very noticeable, with loud noise during rapid acceleration, noise phenomena, and insufficient power. Loss of control over steering and braking: If the tensioner pulley fails while the car is in motion, there will be no brakes and no steering, resulting in very serious consequences. Abnormal noise during startup: If the tensioner pulley is not severely damaged, the vehicle will emit abnormal noise when starting up.
20
4
Share

What does SET mean on a Skoda?

This is used for cruise control. Detailed explanation of SET: SET is the cruise speed control indicator. When you want to set the cruise speed, accelerate the vehicle to the desired speed and press the SET button. At this time, the vehicle speed usually needs to be greater than 30 miles per hour (approximately 48 kilometers per hour). When using cruise speed control, if you step on the brake, the cruise speed controller will stop working. Cruise control system: The cruise control system mainly consists of a command switch, sensors, ECU and actuator. The ECU has two input signals: one is the command speed signal set by the driver as required, and the other is the feedback signal of the actual driving speed. After the controller detects the error between these two input signals, it generates a throttle control signal sent to the throttle actuator, so that the throttle actuator adjusts the opening of the engine throttle according to the throttle control signal to correct the error detected by the electronic control device, thereby keeping the vehicle speed constant.
8
3
Share

What are the distinguishing standards for the Corolla Hybrid version?

Corolla Hybrid version distinguishing standards are as follows: Corolla Hybrid version powertrain: The Hybrid version adopts an oil-electric hybrid system. The Corolla Hybrid series is equipped with a 1.8-liter naturally aspirated engine, paired with an electric motor that delivers a maximum power of 53kw and a maximum torque of 163N·m. Corolla Hybrid version transmission: The Hybrid version is equipped with an E-CVT continuously variable transmission. Corolla Hybrid version body dimensions: The Corolla Hybrid measures 4630mm in length, 1775mm in width, and 1485mm in height, with a wheelbase of 2700mm. Corolla Hybrid version suspension system: The Corolla suspension system features a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension.
7
0
Share

What is the reason for being unable to access the Volkswagen Lavida engine computer?

Main reason is poor engine performance. Exhaust emissions not meeting standards: Poor fuel quality, failed catalytic converter, excessive carbon buildup in intake manifold, clogged fuel injectors, failed oxygen sensor, occasional engine misfires, etc. can all trigger the engine warning light, with poor fuel quality being the most common cause. Replacing the catalytic converter will resolve this. Engine system malfunction: Faulty throttle pedal sensor, throttle position sensor, mass airflow sensor, crankshaft position sensor, or poor wiring connections can all illuminate the engine warning light. These should be repaired or replaced according to relevant maintenance procedures. Transmission system failure: The engine warning light may indicate transmission issues such as internal faults, slipping, or overheating. Professional diagnosis and repair at a service center is required.
8
1
Share

What is Kuangshi Auto?

Kuangshi Auto is the first SUV model under Hanlong Auto, equipped with a 2.0T engine model TN4A20TDZ. The vehicle dimensions are 4985mm in length, 1995mm in width, and 1819mm in height, with a wheelbase of 2997mm. The tire sizes are 255/55R20 or 275/45R21. The Kuangshi Auto features front-engine rear-wheel drive, turbocharged intake, and is paired with an 8-speed automatic transmission. SUV stands for Sport Utility Vehicle, which combines the functionality of an off-road vehicle with urban driving capabilities. Its characteristics include powerful performance, off-road capability, spacious comfort, and excellent cargo and passenger carrying functions.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.