What are the requirements for obtaining a Guangdong B license plate for new energy vehicles?

1 Answers
LaMalia
07/30/25 9:16am
For car owners with Shenzhen household registration, a driver's license is sufficient. Those without Shenzhen household registration must present not only a driver's license but also a residence permit and social security documents. Function of license plates: License plates serve as identification and information registration for vehicles. Their primary purpose is to indicate the vehicle's region of registration and enable tracing of the vehicle's owner and registration details. Classification by license plate colors: Large civilian vehicles: yellow background with black characters. Small civilian vehicles: blue background with white characters. Embassy foreign vehicles: black background with white characters and a red "Embassy" character mark. Consulate foreign vehicles: black background with white characters and a red "Consulate" character mark. Other foreign vehicles: black background with white characters. Test vehicles: blue background with white characters, prefixed with a "Test" character mark. Learner vehicles: blue background with white characters, prefixed with a "Learner" character mark. Temporary plates: white background with red characters, prefixed with "Temporary" characters. Coach vehicles: yellow background with black characters, suffixed with a "Learner" character mark.
Was this review help?
4
4
Share
More Forum Discussions

Will the car display when the tire is flat?

When a car tire is flat, it will be displayed on the vehicle's dashboard. The car dashboard will show a warning light to alert the owner of insufficient tire pressure. The warning light is represented by a flat ring with an exclamation mark in the middle. Tire pressure reset is the operation of resetting the tire pressure monitoring system after the tire pressure fault has been resolved. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button, release it after hearing a "ding" sound, and the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally the dashboard fault light will go out, completing the tire pressure reset. When inflating tires, pay attention to the following points: Always check the pressure with a pressure gauge to avoid over-inflation, which may cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve. If the valve and valve core do not fit smoothly, with protrusions, depressions, or other defects, it will be inconvenient to inflate and measure the pressure. Pay attention to cleanliness when inflating. The air being inflated must not contain moisture or oil to prevent the inner tube rubber from deteriorating and being damaged. Do not exceed the standard pressure too much when inflating and then release the air, nor should you over-inflate because you cannot inflate for a long time after being out. Exceeding the standard too much will cause the cords to overstretch, reducing their strength and affecting the tire's lifespan. Before inflating, wipe the dust off the valve, do not loosen the valve core, and after inflating, apply soapy water (or saliva) to the valve to check for leaks (small bubbles will appear if there is a leak). Install the valve cap tightly to prevent dust from entering the valve. When inflating radial tires, due to their structure, their sinking amount and contact area are larger, often leading to the misconception that they are under-inflated and thus over-inflating; or conversely, because their sinking amount and contact area are naturally larger, they may be mistakenly considered adequately inflated when the pressure is insufficient. Use a standard pressure gauge for accurate measurement. The operating pressure of radial tires should be 0.5-1.5 kg/cm2 higher than that of regular tires. The pressure gauge in the car or the one used in the tire workshop should be regularly calibrated to ensure accurate pressure checks.
2
5
Share

What is the difference between manual and machine transmission fluid change?

The difference between the two is that the warranty period for gravity fluid change is relatively shorter compared to machine fluid change, and the effectiveness of machine fluid change is superior to gravity fluid change. Below are the specific details about transmission fluid: 1. Function: Transmission fluid is an oil product that keeps the car's gear system clean, providing lubrication to extend the lifespan of the transmission components. It also ensures effective lubrication at low temperatures and reduces fluid loss under harsh operating conditions. 2. Types: It is divided into automatic transmission fluid and gear oil. Automatic transmission fluid is specifically designed for automatic transmissions. Manual transmission fluid, commonly referred to as gear oil, is primarily made from petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an important lubricating oil.
16
1
Share

How to Adjust Rearview Mirrors for Optimal View?

When adjusting the rearview mirrors, it is essential to set them to a suitable viewing angle based on your seating posture. Below are some key points for adjusting rearview mirrors: 1. Left rearview mirror: When adjusting the left mirror, ensure you can see both the car body and obstacles clearly on the left rear. The optimal angle is to adjust the vertical position so that the sky and ground each occupy half of the mirror surface. Horizontally, adjust it so that the car body occupies about 1/4 of the mirror area, and you can see the rear door handle. 2. Right rearview mirror: For the right mirror, adjust the vertical position so that the sky occupies about 1/4 of the upper part of the mirror. Horizontally, set it so that the car body takes up about 1/4 of the mirror area, allowing visibility of the rear door handle.
19
1
Share

Why Can't the Key Be Pulled Out of a Manual Transmission Car?

Manual transmission car key can't be pulled out may be due to a malfunction in the ignition switch or the steering wheel locking the ignition switch's locking tongue. Here is a detailed introduction about the ignition switch: 1. Introduction: The ignition system's switch (usually operated with a key) can freely open or close the main circuit of the ignition coil and is also applicable to other circuits. The ignition switch, commonly known as the master switch, master power, or master key, controls the main gate of the vehicle's entire circuit system. It comes in two types: plug-in and rotary knob. 2. Structure: The ignition switch consists of a key, key socket, external wires, and tabs. The ignition switch is generally installed above the vehicle's front or at the center of the dashboard.
6
5
Share

Solutions for Wuling Hongguang S1 Key Locked Inside the Car

Here are the relevant methods: 1. Use the spare key to open the door: The vehicle usually comes with at least two original keys, one as the primary key and the other commonly referred to as the spare key. If the primary key is locked inside the car, try to retrieve the spare key if possible. 2. Contact a locksmith: Seek help from a professional locksmith to unlock the car. Documents required when contacting a locksmith: Valid identification: ID card, passport, or household registration booklet; Proof of vehicle ownership: vehicle registration certificate. If the registration certificate is also locked inside the car, you can provide proof to the locksmith after unlocking. If you don’t have the registration certificate, you may need to file a report at the nearest police station. 3. Break the window to open the door: If retrieving the key or contacting a locksmith is not feasible, breaking the window may be the only option.
10
5
Share

What does 'press' mean in a car?

In a car, 'press' refers to the oil pressure indicated on the dashboard. Below is an introduction to oil pressure: 1. Introduction: Oil pressure refers to the residual pressure of crude oil flowing from the bottom of the well to the wellhead. 2. Categories: It is divided into static pressure and flowing pressure. The oil pressure when the well is closed is called static pressure, while the oil pressure during production is called flowing pressure. Due to friction and resistance losses, flowing pressure is lower than static pressure. Static pressure can intuitively indicate the decline in formation pressure, while flowing pressure is related to production output—when production increases, flowing pressure decreases. 3. Conditions: The oil pressure when the ignition is turned on is generally 280 kPa, the idle oil pressure is 250 kPa, the maximum oil pressure is around 750 kPa, the regulated oil pressure is about 300 kPa, and the residual oil pressure is approximately 150 kPa.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.