···
Log in / Register

What are the requirements for obtaining a B1 driver's license?

4 Answers
McBrooklyn
07/29/25 12:57pm

Requirements for obtaining a B1 driver's license: 1. Age must be between 21 and 50 years old; 2. Height must be at least 1.50 meters; 3. No restrictions on local or non-local applicants, but non-local students must apply for a residence permit to register; 4. Physical conditions must include no color blindness, no myopia, and sound limbs; 5. The B1 license cannot be directly applied for—applicants must have held a C1 license for at least 3 years; 6. No record of accumulating 12 penalty points in any of the last three consecutive scoring cycles. After meeting all the relevant conditions, applicants can submit their application at the local vehicle management office. Upon passing a physical examination and other reviews, they can proceed to the designated driving school for theoretical and practical training. The B1 license test consists of three sections: Subject 1, Subject 2, and Subject 3.

Was this review help?
7
1
Share
ChristianFitz
08/14/25 1:55am

I just passed my B1 driver's license not long ago, and looking back, there were quite a few requirements. The age must be between 20 and 50 years old, and I signed up when I was 21. The medical examination was crucial: binocular vision must be at least 4.9 or above—mine was corrected with glasses—and height must be 155 cm or taller, which I just met. Additionally, there were checks for hearing and color blindness, with no room for any issues. Moreover, you must have held a C1 or similar license for at least two years, and I renewed mine right after reaching the two-year mark. The required materials included an ID card, medical examination report, and photos. After registration, the test was divided into four parts: the theoretical written test for Subject 1 required memorizing the question bank, the field driving test for Subject 2 (like reverse parking and turning) was particularly challenging to practice, the actual road test for Subject 3 assessed adaptability, and Subject 4 covered safety and civics knowledge. The entire process cost several thousand yuan and took two months. I recommend practicing driving more in advance, unlike me who made a nervous mistake during my first road test.

Was this review help?
8
2
Share
Expand All
OBraxton
10/09/25 6:53am

I've been teaching driving for several years, and the most basic requirement for obtaining a B1 driver's license is meeting the official conditions. The age limit is between 20 and 50 years old, and you must pass the physical examination: vision should be at least 4.9, height must be 155 cm or above, with no red-green color blindness or other health risks. Importantly, you must first obtain a C1 license and hold it for at least two years. The examination stages are crucial: the theory test (Subject 1) focuses on traffic regulations, the field driving test (Subject 2) involves handling medium-sized vehicles, the road test (Subject 3) assesses driving skills, and the safety knowledge test (Subject 4) covers essential safety concepts. When registering, bring all required documents, such as your ID card, a copy of your old driver's license, and the medical examination report. Costs vary by location, typically ranging from a few thousand yuan. During training, practice curve driving and parking techniques more to improve your pass rate. Maintain good driving habits consistently—don't cram at the last minute.

Was this review help?
10
1
Share
Expand All
VonLeah
11/22/25 8:08am

When it comes to B1 driver's license requirements, the physical examination is the most crucial. I went to the hospital for a check-up and found that the vision must be 4.9 or above or meet the standard after correction, height must be at least 155 cm, and ensure there are no color blindness or deafness issues. The age range is 20 to 50 years old, beyond which is not acceptable. You also need to have held a C1 driver's license for at least two years, and the test includes both written and practical exams. I recommend making a doctor's appointment in advance to avoid being held up by minor health issues. To simplify the process, just bring your ID card and old driver's license for the materials, and the exam fees range from a few hundred to around a thousand yuan. Health comes first—prevention is always better than regret.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

how do you revive a dead car battery

Yes, you can often revive a dead car battery, but the correct method and likelihood of success depend entirely on why it died. A battery that's simply been drained from leaving lights on can frequently be recovered with a jump-start and a proper drive. However, a battery that has failed due to old age (typically 3-5 years) or an internal fault likely needs replacement. The most common and effective method is jump-starting the car. You'll need jumper cables and a second vehicle with a good battery. Connect the cables in the correct order: positive (red) to the dead battery's positive terminal, then the other positive to the good battery. Connect the negative (black) to the good battery's negative terminal, and finally, attach the last negative clamp to an unpainted metal surface on the dead car's engine block, away from the battery. Start the good car, let it run for a few minutes, then attempt to start the dead car. Once running, drive for at least 20-30 minutes to allow the alternator to recharge the battery. For a battery that can be removed, using a dedicated battery charger or trickle charger is a safer, more controlled option. These devices slowly restore charge without the risk of voltage spikes associated with jump-starting. If the battery has lost fluid, carefully removing the caps (if non-sealed) and topping off the cells with distilled water can help, but avoid overfilling. A last-resort method for older, non-sealed batteries involves an Epsom salt solution . This is a temporary fix at best. You'd drain the existing electrolyte, create a solution of warm distilled water and Epsom salt, and refill the cells. This can sometimes reactivate the plates enough to hold a charge briefly. Always prioritize safety. Wear gloves and eye protection, as batteries contain sulfuric acid. If the battery is swollen, cracked, or leaking, do not attempt to revive it; replace it immediately. Battery Condition Recommended Revival Method Success Probability Key Consideration Drained from lights/accessories Jump-start & drive High (>80%) Requires a 30-minute drive to recharge properly. Drained from short trips Battery charger Moderate-High A full, slow charge is better than the alternator. Old age (4+ years) Replacement Low Internal damage is usually permanent. Low electrolyte levels Top with distilled water Moderate Only possible on serviceable batteries; use distilled water only. Sulfated plates Epsom salt trick Low (<20%) A temporary, last-ditch effort for old batteries.
10
3
Share

how cold can a car battery withstand

A typical car battery can start to have significant trouble below 20°F (-7°C) , and its starting power can be cut in half at 0°F (-18°C) . While a fully charged battery's electrolyte won't freeze until around -70°F (-57°C), a discharged battery can freeze at just 32°F (0°C), causing permanent damage. The real-world limit isn't a single temperature but a combination of the battery's health, the engine oil's viscosity, and the severity of the cold. The issue is chemistry. Cold temperatures dramatically slow down the chemical reaction inside the lead-acid battery that produces electrical current. This results in reduced Cold Cranking Amps (CCA) , a rating that measures the battery's ability to start an engine in cold weather. At the same time, engine oil thickens, making the engine harder to turn over. A weak battery that might start a car in summer can fail completely on a cold morning. The following table illustrates how temperature affects a battery's available power, assuming a battery with a 600 CCA rating: Temperature Available Power (Approx. % of CCA) Effect on Starting Ability 80°F (27°C) 100% Optimal performance. 32°F (0°C) 65% Noticeable strain, weaker batteries may fail. 0°F (-18°C) 40% Significant power loss; starting becomes difficult. -20°F (-29°C) < 25% Extreme risk of failure; permanent damage likely if discharged. To withstand deep cold, prevention is key. If possible, park in a garage. For extreme climates, invest in a battery with a higher CCA rating than your vehicle's minimum requirement. Using a battery blanket or a trickle charger/maintainer overnight can provide the necessary warmth and charge to ensure a reliable start. If your battery is more than three years old, have it tested before winter arrives.
14
4
Share

how can i start my car with my phone

You can start your car with your phone if it's equipped with a remote start system that connects to a dedicated mobile app. This feature, often called a connected car service , uses your phone's data connection to send a command to your vehicle, allowing you to start the engine and often control climate settings from virtually anywhere. This capability is typically available through: Factory-Installed Systems: Many new cars come with a manufacturer-specific app (e.g., Toyota Remote Connect, FordPass, myChevrolet). These usually require a subscription after an initial trial period. Aftermarket Systems: You can add this functionality to older vehicles by installing a third-party remote start system that includes a smartphone module. The primary benefits include warming up the cabin in winter or cooling it in summer before you get in. The process is generally simple: open the app, authenticate with a PIN or biometrics, and tap the "start" button. The car will run for a preset time, usually 10-15 minutes, for safety. Manufacturer/System App Name Subscription Typically Required? Common Key Features (Beyond Remote Start) Ford/Lincoln FordPass, Lincoln Way Yes (after trial) Lock/Unlock, Vehicle Status, Schedule Start General Motors myChevrolet, myGMC, etc. Yes (after trial) Remote Lock/Unlock, Fuel Level, Tire Pressure Toyota/Lexus Toyota App, Lexus Enform Yes (after trial) Climate Control, Vehicle Finder, Driving History Tesla Tesla App No Climate Control, Sentry Mode, Charging Management Aftermarket (Viper) Viper SmartStart Yes Security Alarms, Remote Trunk Release, GPS Location Aftermarket (Compustar) DroneMobile Yes 2-Way Remote Confirmation, Battery Voltage Monitor Before relying on this feature, check your specific vehicle's compatibility and be aware of the ongoing costs. Also, remember the car must be in "Park" with adequate fuel or battery charge for the remote start command to work.
16
0
Share

how do i find out the trim of my car

The fastest way to find your car's trim level is to decode the Vehicle Identification Number (VIN) . This 17-character code is your car's unique fingerprint and contains the exact trim information. You can find the VIN on the driver's side dashboard (visible through the windshield), on the driver's side doorjamb, or on your vehicle's title and insurance documents. Once you have the VIN, use a free online decoder from sites like the National Highway Traffic Safety Administration (NHTSA) or reputable automotive sources like Edmunds or Kelley Blue Book. Simply enter the VIN, and the decoder will provide a full breakdown, including the trim package. The trim level, often called the "trim line," specifies the feature set and options your car left the factory with, such as "LX," "EX," "Touring," or "Platinum." If you don't have immediate online access, check these physical locations: Owner's Manual or Vehicle Documentation: The original window sticker (Monroney label) or the purchase documents almost always list the trim. Badging on the Car: Look for emblems on the rear trunk lid or front fenders. Names like "Z71" (for off-road trucks), "SS" (performance), or "Limited" are common trim indicators. Inside the Driver's Doorjamb: The manufacturer's label here often includes descriptive information that can hint at the trim. VIN Character Position Purpose Example Data for a Honda Civic 1-3 (WMI) Identifies Manufacturer 1HG (Honda Motor Co., USA) 4-8 (VDS) Describes Vehicle Attributes Civic 4-door Sedan, Engine Type 9 (Check Digit) Security Code to Verify VIN Authenticity 6 10 (Model Year) Year of Manufacture L (2020) 11 (Plant Code) Assembly Plant A (Marysville, Ohio) 12-17 (VIS) Unique Production Serial Number 123456 Knowing your trim is crucial for buying correct parts, getting accurate insurance quotes, and determining your car's resale value.
14
1
Share

how do you get a car auction license

Getting a car auction license involves a multi-step process that varies by state but generally requires submitting an application to your state's licensing board, passing a background check, securing a surety bond, and often completing pre-licensing education. The core requirements are set by your state's Department of Motor Vehicles (DMV) or a specific Motor Vehicle Dealer Board. The first step is identifying the correct license type. Common categories include a Wholesale Motor Vehicle Auction Dealer License (selling exclusively to licensed dealers) and a Public Auto Auction License (selling to the general public). Requirements differ significantly between them. You must then thoroughly research your specific state's regulations. For example, California's requirements through the Department of Motor Vehicles are different from those in Florida, which are overseen by the Department of Highway Safety and Motor Vehicles. Key universal steps include: Business Structure & Location: Establishing a legal business entity (LLC, corporation, etc.) and securing a physical location that meets zoning requirements. Many states require a permanent office building, not just a vacant lot. Background Check: Principals and key managers undergo fingerprinting and a criminal history review. Surety Bond: You'll need to purchase a surety bond, which acts as a financial guarantee for your business practices. The bond amount varies by state and license type. Pre-Licensing Education: Many states mandate completing a certified dealer education course. Application & Fees: Submitting a detailed application with supporting documents and paying all applicable fees. Dealer Plates & Insurance: Obtaining dealer license plates and garage liability insurance. After licensing, you must adhere to ongoing regulations, including record-keeping, consumer protection laws, and timely renewal. The table below outlines examples of specific state requirements to illustrate the variability. State Licensing Body License Type Example Approximate Bond Amount Pre-License Education Required? Texas Texas Department of Motor Vehicles Wholesale Auction License $25,000 Yes California California Department of Motor Vehicles Auto Auction Dealer License $50,000 Yes Florida Florida Department of Highway Safety and Motor Vehicles Auction Dealer License $25,000 Yes New York New York State Department of Motor Vehicles Vehicle Auction Merchant License $20,000 Varies by county Illinois Illinois Secretary of State Auction License $25,000 No
12
2
Share

how does a weak battery affect a car

A weak battery primarily affects a car by failing to provide the consistent, high-amperage power needed to reliably start the engine and support the vehicle's complex electrical systems. The most immediate symptom is a slow-cranking or non-starting engine, often accompanied by dimming lights and erratic behavior from electronic features. Modern vehicles are particularly vulnerable because their computers require stable voltage; a weak battery can cause confusing error messages, transmission shifting issues, and damage to sensitive components like the alternator. The core issue is that a car battery must deliver a massive burst of current (measured in Cold Cranking Amps, or CCA) to turn the engine over. As a battery weakens due to age, extreme temperatures, or parasitic drain (power draw from systems even when the car is off), its voltage drops under load. When you turn the key, instead of hearing a quick "vroom," you get a slow, labored "rur... rur... rur" sound. This indicates the starter motor isn't getting enough power. Beyond starting problems, the effects ripple through the entire electrical network. You might notice: Flickering or dimming headlights and interior lights , especially when using accessories like power windows. Malfunctioning electronics: Infotainment screens may reset, power seats might move slowly, and advanced driver-assistance systems (ADAS) like lane-keeping assist could deactivate unexpectedly. Voltage-sensitive component failure: The alternator, which charges the battery, can be overworked trying to compensate for a weak battery, leading to premature failure. The table below shows common symptoms and the underlying electrical issue: Symptom Underlying Electrical Issue Potential Risk Slow engine cranking Low voltage/amperage to starter motor Engine won't start Dimming headlights Voltage drop when electrical load increases Reduced night-time visibility Check engine light Unstable voltage confusing engine control unit Inaccurate diagnostics Erratic transmission shifts Unstable voltage affecting transmission control module Costly transmission damage Power accessory failure Insufficient power for motors and control units Inconvenience and repair costs The best course of action is to test the battery's voltage and CCA rating. If it's weak, replace it promptly to avoid being stranded and prevent more expensive electrical repairs.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.