What are the requirements for obtaining a B1 driver's license?

1 Answers
Holden
07/25/25 9:03am
Requirements for the B1 driver's license test: 1. Hold a C1 driver's license: You must have held a (C1) driver's license for more than three years and be between 21 and 50 years old. To apply for an additional (B1) driver's license category, you must not have any full-score (12 points) records in the current scoring cycle (this year) and the most recent scoring cycle (last year) before applying. You can then apply for the additional license at the vehicle management office in your registered residence, as regulations stipulate that the application for adding a (B1) category can only be processed at the vehicle management office in the driver's registered residence, not in temporary residence locations. 2. Violation record requirements: You must not have any accidents resulting in death where you were fully or primarily responsible, no record of drunk driving (alcohol concentration greater than 80mg), and no records of speeding over 50% or drunk driving within the current and the last three consecutive scoring cycles.
Was this review help?
2
1
Share
More Forum Discussions

How many tons does the Teana weigh?

Teana weighs between 1.4 to 1.6 tons, depending on the specific model and engine displacement. The Teana is a flagship mid-to-high-end luxury sedan under NISSAN, with dimensions of 4868mm in length, 1830mm in width, and 1490mm in height. It has a wheelbase of 2775mm, a fuel tank capacity of 70 liters, and a trunk capacity of 516 liters. The car features front-engine, front-wheel-drive configuration. In terms of equipment, this model comes with a 3D information display system, Bluetooth system, ECO DRIVE energy-saving driving assistance system, and NAVI navigation system. For safety features, it includes VDC (Vehicle Dynamic Control) system, TCS (Traction Control System), ITS (Intelligent Trace Control) pre-collision safety system, AVM (Around View Monitor) 360-degree camera system, HSA (Hill Start Assist) system, and TPMS (Tire Pressure Monitoring System).
18
5
Share

Why did one of the xenon headlights suddenly turn yellow?

The reason why one of the xenon headlights suddenly turns yellow is that as the usage time increases, the color temperature drops below 5000k and it will obviously turn yellow. Here is some extended information about xenon headlights: 1. Definition: It refers to a high-pressure gas discharge lamp. The xenon lamp is a heavy metal lamp. By filling the anti-ultraviolet crystal quartz glass tube with a variety of chemical gases, such as xenon and other inert gases, and then using a booster to instantly increase the vehicle's 12-volt power supply to 23,000 volts, under high voltage, xenon will be ionized and produce a light source between the two poles of the power supply. 2. Advantages: It has three times the light intensity of ordinary halogen bulbs, but consumes only two-thirds of the energy. On the other hand, xenon bulbs use a light color that is almost the same as daylight, creating better visual conditions for drivers. Xenon headlights make the light range wider and the light intensity greater, greatly improving driving safety and comfort.
4
2
Share

Why is the 8th generation Accord's air conditioning not cooling?

Common reasons for the 8th generation Accord's air conditioning not cooling are as follows: 1. The compressor capacitor is damaged or faulty, causing the compressor not to work (compressor does not turn). 2. Refrigerant leakage in the air conditioning system (manifested as both indoor and outdoor units working, the compressor also working, but no effect). 3. The remote control is faulty or the air conditioning receiver is faulty (manifested as the air conditioning not responding when turned on, or working intermittently). 4. The resistance value of the room temperature sensor changes, causing the outdoor unit not to work (the phenomenon is the same as the air conditioning stopping after reaching the set temperature). 5. Air conditioning power supply issues. 6. The four-way valve or compressor has high and low pressure gas leakage, the air conditioning works but has no effect. 7. The indoor or outdoor unit control board is faulty, causing the air conditioning not to cool (manifested as no response when turned on or erratic operation). 8. The indoor or outdoor fan is damaged (outdoor fan damage is manifested as excessive exhaust temperature or high-pressure protection. Indoor fan damage is manifested as frost formation on the indoor unit, the outdoor unit continuously working, and moisture entering the indoor unit).
15
2
Share

How to Use the Cigarette Lighter in Volkswagen Santana?

Usage method of Volkswagen Santana cigarette lighter: 1. The cigarette lighter is quite intuitive, with a circular button featuring a cigarette icon. Activate the cigarette lighter, and it will heat up to a temperature sufficient to light a cigarette. The lighter will automatically pop up when ready, accompanied by a slight sound. 2. The inner end is the heating part. Exercise caution when handling to avoid burns. Gently touch the cigarette to ignite it. 3. It is advisable to refrain from smoking while driving. If smoking is necessary, use the cigarette lighter to minimize safety risks. More information about Santana: 1. The Santana is a brand of cars produced by Volkswagen in California, USA. Since 1985, after more than 20 years of production, the standard Santana sedan has become ubiquitous across the country. 2. The Santana lineup is equipped with a 1.5-liter naturally aspirated engine. 3. The body dimensions of the Santana are 4475*1706*1469mm.
3
3
Share

Which type of engine oil is suitable for turbocharged engines?

Fully synthetic engine oil is currently the most suitable choice for turbocharged engines. Maintenance for turbocharged engines should include the following: 1. Engine oil selection: This is the most critical aspect. The grade and viscosity standards of the engine oil must not fall below the manufacturer's minimum requirements. Simply put, use the type of engine oil specified in the maintenance manual. It is recommended to use fully synthetic engine oil for better protection. 2. Regular oil changes: Delaying oil changes can lead to excessive impurities in the dirty oil, accelerating wear on the turbocharger. The rotating shaft is not supported by bearings but by bushings, and the shaft does not directly contact the bushings—instead, it floats on an oil film. If the oil is of poor quality and cannot form a proper oil film, or if the oil becomes dirty with impurities, it will cause wear on this part, shortening the turbocharger's lifespan. 3. Timely replacement of the air filter: Some people may simply blow out the filter and reuse it, which is not advisable. Compared to regular vehicles, air filters for turbocharged (T) models are more expensive, indicating higher filtration requirements. If the air filter becomes dirty, its filtration efficiency declines, potentially damaging the turbocharger.
5
2
Share

What are the symptoms of a faulty drive shaft in the Teana?

Symptoms of a faulty drive shaft in the Teana are as follows: 1. There is a knocking sound from the drive shaft when starting the car or during gear changes while driving, especially noticeable when driving at low speeds in high gears. 2. No abnormal noise from the drive shaft when starting the car, but knocking sounds occur while driving. 3. No abnormal noise from the drive shaft when starting the car, but unusual sounds appear when the car is coasting. 4. Continuous noise throughout the entire driving process. Below is some relevant information about the drive shaft: 1. The drive shaft consists of a shaft tube, a telescopic sleeve, and universal joints. The telescopic sleeve can automatically adjust the distance changes between the transmission and the drive axle. The universal joint ensures the angle changes between the transmission output shaft and the drive axle input shaft, enabling equal angular velocity transmission between the two shafts. 2. The drive shaft is a crucial component in the vehicle's drivetrain for transmitting power. Its role, together with the transmission and drive axle, is to transfer the engine's power to the wheels, generating driving force for the car.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.