What are the requirements for Didi car registration?

2 Answers
Priscilla
07/29/25 12:50am
Here are the conditions for Didi car registration: 1. Age: 22 to 60 years old. Drivers joining the platform will automatically be terminated by the system if they exceed the age limit. 2. Driving experience: At least 3 years of driving experience is required. 3. Eligible vehicle types: C2, C1, or above, and the registered vehicle (assigned driving vehicle) must match the driver's permitted vehicle type. 4. Driver background check: In collaboration with relevant national authorities, the following strict reviews and screenings are conducted during driver admission to exclude individuals who may pose a threat to passenger safety from entering the platform.
Was this review help?
4
3
Share
VivianFitz
08/12/25 5:01am
I started driving for Didi last year, and the registration requirements were actually quite straightforward: first, you have to be between 18 and 60 years old, which was just right for my age. Then, you need a C1 or C2 driver's license with at least 3 years of driving experience, which I met because I had driven a taxi before. As for the vehicle, it must be no more than 8 years old, and my SUV passed the platform's inspection, including the exterior, number of seats, and cleanliness. I also needed to provide proof of identity and photos of the vehicle registration certificate, which could be uploaded directly to the app's backend. The background check was also crucial, and I had to submit a no-criminal-record certificate, which took me a day to process. The whole process was a bit tedious, but after stabilizing my bookings, the income was good. I recommend that newcomers first familiarize themselves with the city routes to save time and effort, and also avoid traffic congestion during peak hours.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to reset the tire pressure of Vision X6?

First, use the car computer to bring up the tire pressure monitoring system, press the reset button, then proceed to deflate the tire. Continue deflating until the horn sounds, indicating that one tire has been successfully reset. Repeat the same process for the other tires; the horn sounding signifies a successful reset. Below is relevant information about tire pressure: 1. Tire pressure is closely related to the performance of the car, such as comfort and load capacity, and it also affects the lifespan of the tire. Air pressure is the lifeblood of a tire; both too high and too low will shorten the tire's service life. 2. Low pressure increases the deformation of the tire body, making the sidewalls prone to cracks. It also causes flexing movements, leading to excessive heat, which accelerates rubber aging, fatigue of the cord layers, and breakage of the cords. Additionally, it increases the tire's contact area with the ground, accelerating wear on the tire shoulders. 3. High pressure causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body. This increases the load on the car while driving, and impacts can lead to internal cracks and blowouts. Moreover, high pressure accelerates wear on the tire tread and reduces its resistance to punctures.
10
1
Share

How Many Generations Does the Crown Have?

The Crown has maintained a generational update cycle of approximately 4-5 years. The first-generation Crown debuted in 1955, featuring a double-wishbone front suspension, a 1.5-liter engine, and a dedicated sedan chassis, marking Toyota's entry into true sedan production. The Crown is a mid-to-large-sized vehicle brand under the Toyota Group. Below is an overview of the Crown's generational evolution: 1. 1995 Tenth-Generation Crown: Adopted a unibody construction and introduced advanced technologies like VSC and VVT-I, significantly enhancing driving stability. 2. 1999 Eleventh-Generation Crown: Blended traditional Crown aesthetics with contemporary design flair, debuting a 3.0-liter inline 6-cylinder direct injection engine. 3. 2004 Twelfth-Generation Crown: Equipped with a 3.0-liter V6 engine, dual VVT-I, and a 6-speed AT, achieving a balance of superior comfort and sportiness. 4. 2009 Thirteenth-Generation Crown: Notably, the domestic version was not a direct import of Japan's thirteenth-gen model but underwent comprehensive adaptations for China's luxury market, target demographics, road conditions, and climate. 5. 2014 Fourteenth-Generation Crown: Measures 5020mm in length, 1805mm in width, 1480mm in height, with a 2925mm wheelbase. It boasts a top speed of 230km/h and accelerates 0-100km/h in just 7.7 seconds.
1
4
Share

How to duplicate a Mercedes car key?

Mercedes car keys can be duplicated at 4S dealerships or auto parts markets, but the prices vary. Although key matching at 4S dealerships is more expensive, the technology is relatively reliable. Here is more information about Mercedes car keys: 1. Many vehicles nowadays are equipped with electronic chip anti-theft technology, which uses two-way communication between the key and the vehicle. Based on whether the verification result of the electronic key ID matches the key ID code in the vehicle's anti-theft system, when the key ID verification is successful, the CAN communication sends a signal to the BCM to allow the engine to start. Only keys with ID codes registered in the BCM and ECM can start the engine. 2. 4S dealerships use specialized diagnostic computers and software to register keys. After initializing all ignition keys, they register the key ID codes step by step. In contrast, auto parts markets might use password decryption methods to copy the key onto a new one, resulting in differences in security levels. 3. For vehicles with smart keys, generally, re-registering the key is sufficient. If the mechanical key has a chip, the 4S dealership needs to replace the steering lock and register the key. Once the key is registered, the lost key becomes invalid and cannot start the vehicle, but the mechanical key can still open the door. For safety reasons, it is recommended to replace all mechanical lock cylinders in the vehicle, so that anyone who finds the key cannot open the door.
1
1
Share

How to Replace the Battery of VV7 Car Key?

There are two screws on the back cover of the car key. First, use a screwdriver to remove the screws separately. Open the back cover to see the battery board, then remove the old battery and install the new one. Finally, reattach the back cover and tighten the screws. Below is a related introduction to the VV7: 1. It is equipped with a 2.0T turbocharged engine with the model code GW4C20A, delivering a maximum power of 234 horsepower. The power is 172kW/5500rpm, and the torque is 360N·m/5500rpm. 2. The 2.0T turbocharged direct injection engine incorporates engine intelligent start-stop technology with memory function, advanced plastic intake manifold processing, dual-mass flywheel, silent timing chain, and DVVT intake and exhaust valve variable timing technology, achieving a maximum torque output of 387 N·m to provide powerful performance for the car.
11
0
Share

Can the Tiguan L use 92-octane gasoline?

The Tiguan L should not use 92-octane gasoline. The official vehicle manual recommends using 95-octane gasoline for the Tiguan L. This helps better protect and maintain the vehicle, as well as extend the lifespan of its components. Using 92-octane gasoline in a car designed for 95-octane can lead to engine knocking. Mixing 92 and 95-octane gasoline is not advisable. 95-octane gasoline is suitable for engines with high compression ratios. If 92-octane gasoline is used in such engines, abnormal combustion may occur, leading to knocking and potential engine damage. Additionally, carbon buildup in the engine will accumulate faster than usual, resulting in reduced power, engine wear, or even complete failure. Gasoline is a mixture, and while the chemical compositions of 92 and 95-octane are similar, their anti-knock properties differ. For vehicle safety, it is recommended to use them separately. The main differences between 92 and 95-octane gasoline are their octane ratings and quality levels, as explained below: Octane rating difference: 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. Quality difference: The octane rating indicates the gasoline's resistance to knocking. Higher-octane gasoline offers better anti-knock performance, ensuring smoother engine operation, reduced wear, and better engine protection. Using higher-octane gasoline in a vehicle designed for lower-octane fuel will not cause damage, but the increased octane rating may alter the fuel's ignition point, leading to delayed combustion. This can reduce the engine's power output and thermal efficiency, resulting in poorer performance. Using lower-octane gasoline in a vehicle designed for higher-octane fuel can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will develop during the upward stroke, making the engine run very unevenly. Mild knocking may only increase noise without noticeable engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to engine seizure. If you accidentally mix or use the wrong octane gasoline, refueling with the correct octane next time should restore normal operation. Some drivers believe using higher-octane gasoline improves performance, but this is unnecessary if the engine's compression ratio doesn't require it. At best, it may result in slightly lower emissions and cleaner combustion.
18
1
Share

How to cancel the maintenance reminder for Audi A4L?

Audi A4L maintenance reminder cancellation method is as follows: 1. Press the CAR button to enter the car settings, and select "Maintenance and Inspection" in the settings interface. 2. Use the rotary button to select "Maintenance Cycle" under the sub-menu of "Maintenance and Inspection", then press the knob to confirm and enter the next sub-menu. 3. After entering the "Maintenance Cycle", the first interface will appear. Adjust to the second interface using the rotary knob, and follow the prompts to reset the maintenance cycle. Here is more information about the Audi A4L: 1. Exterior: The A4L has a stylish and dynamic appearance, with smooth and natural body lines, and the front face design is highly praised. 2. Interior: The interior of the Audi A4L continues the Audi family-style design, with exquisite craftsmanship and high-quality materials. A large number of parts shared with the A6L can be found on the A4L's center console. 3. Power: The A4L is equipped with two new green and efficient engines, featuring advanced technology, sufficient power output, stable starting, and excellent acceleration performance.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.