What are the requirements for applying for a motorcycle license?

1 Answers
StMarley
07/29/25 7:36pm
Motorcycle license application requirements include: 1. Age requirements: For light motorcycle models, applicants must be between 18 and 70 years old; for ordinary three-wheeled motorcycles and ordinary two-wheeled motorcycles, applicants must be between 18 and 60 years old. 2. Physical requirements: (1) Height: Must be at least 150cm tall. (2) Vision: Naked or corrected vision in both eyes must reach at least 4.9 on the logarithmic visual acuity chart. (3) Color vision: No red-green color blindness. (4) Hearing: Able to distinguish the direction of sound with each ear at a distance of 50cm from a tuning fork. (5) Upper and lower limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function; both lower limbs must be intact with normal movement function, and the length difference must not exceed 5cm. (6) Trunk and neck: No movement dysfunction.
Was this review help?
8
1
Share
More Forum Discussions

Why is there no ready stock for the BenBen E-Star?

Because the Changan BenBen E-Star adopts a pre-order purchasing method. Below are extended details: Correct maintenance methods for new energy vehicles: 1. Properly grasp charging time: Whether it's a new car or a used new energy vehicle, it's essential to understand the charging time, especially after acquiring a new car, where necessary recharging is required. During usage, correctly managing charging time is crucial. If the battery indicator shows red or yellow during normal driving, it's time to recharge to prevent excessive discharge. Charging time should not be too long either, as overcharging can cause the battery to overheat, reducing its lifespan. 2. Protect the charger: The charger for new energy vehicles is also an important part of daily maintenance that cannot be overlooked. When charging a new energy vehicle, carefully read the charger's user manual. During charging, ensure the charger is well-ventilated; otherwise, it may not only affect the charger's lifespan but also easily cause damage to the battery.
19
4
Share

What are the differences between the 911 and 992?

Here are the specific differences between the Porsche 911 and 992: 1. Powertrain: The 992 is equipped with a 3.0T engine, delivering a maximum output power of 331kW, which is 22kW more than the 991 model, with a peak torque of 530Nm. The 992 accelerates from 0 to 100 km/h in 3.7 seconds and has a top speed of 308 km/h, both improvements of 0.4 seconds over the 991. The 992 also features the ZF 8-speed PDK dual-clutch transmission, enhancing shift speed and fuel efficiency. 2. Technology and Features: Compared to the 991, the 992 adds a driving assistance system, a Wet mode designed for slippery road conditions, and offers optional features such as an adaptive cruise control system with distance keeping, follow-to-stop, and emergency braking assistance, as well as a night vision assist system with infrared thermal imaging.
8
2
Share

Why is water dripping from the exhaust pipe?

The reason for water dripping from the exhaust pipe is: After gasoline is completely burned, it produces water and carbon dioxide. Water exists as steam at high temperatures, which is colorless and transparent. When the temperature drops below 100 degrees, the steam condenses into water. If the condensed water droplets are very small and suspended in the air, the steam appears as white smoke. When the ambient temperature is low, the white smoke from the exhaust pipe is actually steam; if the condensed water droplets accumulate, they turn into water. Water dripping requires three conditions: the air-fuel ratio must be correct, whether the engine is fuel-injected or carbureted, indicating that the vehicle's fuel supply system is functioning properly without issues, the compression ratio is normal, and fuel consumption is within the normal range; the engine cylinder pressure must be normal, indicating that there is no internal wear in the engine block, and components such as the cylinder liner and sealing rings are in good condition.
20
1
Share

How Often Should You Start a Car That's Not in Use?

It is recommended to start a car that has been parked for about a week. Here are some battery maintenance tips: 1. In-car power usage: To maintain your car battery, avoid activities like listening to the radio loudly, charging your phone, or using an air pump while the engine is off. Prolonged use of these devices can drain the battery, and frequent depletion significantly reduces its lifespan. 2. Long-distance highway driving: Regularly driving on the highway has many benefits. It not only helps remove carbon deposits from the engine but also fully charges the battery. Generally, driving on the highway for over an hour can fully charge the battery, keeping it in optimal condition. 3. Avoid prolonged inactivity: If the car is not used for an extended period, disconnect the battery or start the vehicle every two weeks and drive it for several dozen kilometers to ensure the battery remains functional. 4. High-power device connection: Many car accessories, such as car refrigerators, vacuum cleaners, and air pumps, have high instantaneous power demands. Avoid connecting them directly to the car battery. Instead, start the engine first before using these devices.
6
3
Share

What does 215/60R17 on a tire mean?

215/60R17 indicates that the tire has a tread width of 215 mm, an aspect ratio of 60%, and an inner diameter of 17 inches. Below is a detailed introduction to car tire specifications: 1. Specification model representation: Tires are important components of a car, and there are many specification models of tires, with different models suitable for different types of vehicles. The specification model identification is usually on the sidewall of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on the maximum speed they can withstand, tires can be divided into different speed ratings from A to Z, with the A rating further subdivided into eight different levels from A1 to A8. The further back the letter representing the tire's speed rating is in the alphabet, the better the tire's performance.
3
4
Share

How many liters does it take to fill up an Audi A6L?

Audi A6L has a fuel tank capacity of 73 liters when fully filled. The following is an introduction to the method of checking fuel tank capacity and usage precautions: Method for checking fuel tank capacity: Currently, the method for checking a car's fuel tank capacity is basically by observing the reading on the fuel gauge inside the vehicle. Without any issues, the fuel quantity will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5-6 segments, with each segment representing the remaining fuel capacity in the tank. Normally, you should refuel when there are only two segments left on the fuel gauge to avoid running out of gasoline halfway. Precautions for fuel tank usage: The location where the fuel tank is stored must be safe to prevent fires. The fuel tank or fuel barrel should be placed separately in a visible area, maintaining an appropriate distance from diesel generator sets, and strictly prohibiting smoking. After refueling, the fuel tank cap should be locked to reduce fuel evaporation loss and maintain fuel cleanliness.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.