What are the requirements for applying for a motorcycle license?

2 Answers
DelIris
07/24/25 11:05am
To apply for a motorcycle driver's license, the applicant must be at least 18 years old and under 60 years old, with physical conditions meeting the corresponding standards. Below is the relevant introduction: Motorcycle: A motorcycle is a two-wheeled or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Specific requirements: To apply for low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be at least 18 years old and under 60 years old; the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. For those with monocular vision impairment, the naked or corrected vision of the better eye must reach 5.0 or above on the logarithmic visual acuity chart, with a horizontal field of vision reaching 150 degrees; both ears must be able to distinguish the direction of sound at a distance of 50 centimeters from the tuning fork; both lower limbs must be sound and have normal motor function, with no length difference greater than 5 centimeters; there must be no motor dysfunction in the trunk or neck; the right lower limb or both lower limbs may be missing or have lost motor function but must be able to sit and stand independently.
Was this review help?
15
2
Share
DeCali
08/11/25 6:03am
I've been thinking about getting a motorcycle license recently and found there are quite a few requirements. You must be at least 18 years old to qualify for registration—if you're underage, you'll need parents or guardians to sign a consent form. Good physical health is mandatory, so a basic medical check-up is required to test vision, hearing, and ensure no color blindness. Bring your ID card or household registration to prove your identity, and non-locals need to add a temporary residence permit. When registering, visit a local driving school or the vehicle management office to pay fees and fill out forms, usually costing a few hundred yuan. Training courses are essential, covering traffic laws and riding skills. The exam consists of a theory test (multiple-choice questions on road rules) and a practical test (riding maneuvers like starting, stopping, and circling). If you already have a car driver's license, you can directly upgrade it to simplify the process. The entire process emphasizes safety awareness—wearing a helmet is a must. Spending time learning from experience is worth it, as safe riding is what truly matters.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Where is the Car Tire Pressure Monitoring Button Located?

The car tire pressure monitoring button is located in front of the gear lever, labeled as 'set'. The functions of the tire pressure monitoring system are: 1. It will promptly alert you in case of rapid or slow air leakage when the tire is punctured; 2. It will issue an alarm when tire looseness causes unbalanced friction, leading to tire temperatures reaching 70 degrees Celsius to prevent tire blowouts; 3. If the tire has not been inflated for a long time and the pressure falls below the vehicle's preset limit, it will alert you to prevent low pressure from causing tire temperature rise and subsequent blowouts. The method to reset the tire pressure monitoring system is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a flat surface and turn off the engine; 3. Power on the vehicle and hold down the tire pressure monitoring button; 4. After 5 seconds, you will hear an alarm sound, and releasing the button will complete the reset successfully.
6
4
Share

Is the Transmission the Same Between the 9th and 10th Generation Accord?

The transmissions in the 9th and 10th generation Accords are not the same. Both models use CVT (Continuously Variable Transmission), but the 10th generation Accord is equipped with Honda's new-generation CVT. The 10th generation Accord is a mid-size sedan with the following dimensions: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, fuel tank capacity 56 liters, trunk capacity 574 liters, and curb weight 1495kg. The 10th generation Accord features a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, maximum torque of 260Nm, and maximum power of 143kW, paired with a CVT transmission.
20
4
Share

What is the correct way to park an automatic transmission car?

Automatic transmission car correct parking method is: 1. Press the brake to stop; 2. Shift the gear from D to N; 3. Pull the handbrake and turn off the engine; 4. Release the foot brake, but do not turn off the power, to ensure the car is completely stopped under the handbrake; 5. Press the foot brake and shift the gear from N to P; 6. Release the foot brake; 7. Turn back the key, turn off the power and pull out the key. An automatic transmission car allows the driver to control the accelerator pedal according to driving needs during operation, and it can automatically shift into different gears based on engine load and the car's operating conditions.
3
0
Share

Where is the air conditioning drain outlet located on the Sylphy?

The air conditioning drain outlet on the Sylphy is located under the front passenger seat. It also includes sunroof drain holes, fuel filler cap drain holes, trunk lid drain holes, and engine compartment drain holes. Taking the 2021 Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and curb weight 1188kg. The 2021 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine producing maximum power of 122PS, maximum torque of 155Nm, and maximum power output of 90kW, mated to a 5-speed manual transmission.
6
0
Share

Which is quieter, 5w30 or 5w40?

5w40 is quieter. In terms of fluidity, 5w30 has relatively better fluidity than 5w40, which makes it more capable of reducing fuel consumption and allowing the engine to dissipate heat faster and more efficiently. However, 5w30 can result in slightly louder engine noise, while using 5w40 can avoid this issue. 5w40 and 5w30 engine oils differ mainly in the numerical value after the "W" in the oil grade, which represents the high-temperature viscosity rating. This indicates the likelihood of the oil thinning at high temperatures. A higher number means greater viscosity and suitability for higher environmental temperatures. The number before the "W" represents the oil's flow performance at low temperatures—a smaller number indicates better cold-start performance. The number after the "W" represents the oil's stability at high temperatures, or its resistance to thinning. A higher number means better high-temperature stability. Things to consider when choosing engine oil: Engine oil should be selected based on the engine's requirements. There is no need to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Multi-grade oils are preferable as they are economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oils, they may appear darker prematurely and exhibit lower oil pressure compared to conventional oils—both of which are normal.
12
3
Share

What are the differences between Changfeng V73 and imported V73?

The differences between Pajero V73 and imported V73 are as follows: 1. V73 is Changfeng Pajero, while V73 is also imported Pajero. The trunk of V73 is printed with Changfeng Automobile V6; the front and rear fender emblem trim strips of imported V73 are golden. 2. The most significant difference between V73 and imported V73 is that V73 has an additional rear axle differential lock. In terms of performance, there is no obvious difference between V73 and imported V73, but there are noticeable gaps in appearance and manufacturing process. V73 uses imported parts assembled by Changfeng, while imported V73 is entirely imported. 3. In terms of appearance, imported V73 is slightly more stylish than V73. Moreover, there are fundamental differences in steel quality, mechanical strength, sealing degree, power and drive components, chassis and transmission parts, electronic components, etc. The simplest proof is just a screw.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.