What are the requirements for applying for a B1 license?

1 Answers
StAmy
07/30/25 7:39am
The requirements for applying for a B1 license are: 1. Before learning to drive with a B1 license, you must have held a license for large trucks, city buses, small automatic transmission vehicles, small cars, low-speed trucks, or three-wheeled vehicles for more than three years; 2. You must not have accumulated 12 penalty points within the three cycles prior to applying for the B1 license; 3. The applicant must be between 21 and 50 years old and meet all the requirements during the medical examination. The vehicle types permitted with a B1 license include: medium-sized passenger cars, small cars, small automatic transmission vehicles, low-speed trucks, three-wheeled vehicles, and wheeled self-propelled machinery. The full name of the driver's license is the motor vehicle driver's license, also known as the 'driver's license,' which is the certificate required by law for motor vehicle drivers.
Was this review help?
14
4
Share
More Forum Discussions

What are the changes in the new driving test regulations in August?

In August, the new driving test regulations will take longer to complete, extend the certification cycle, and increase registration fees. Here is additional information: 1. Legal basis: Article 1 of the "Motor Vehicle Driving Training Teaching and Examination Outline" states that the theoretical training time for each student shall not exceed 4 class hours per day, and the practical training time shall not exceed 4 class hours per day. The training and teaching part of this outline is divided into three stages. After each teaching stage, an assessment of the student's learning in that stage shall be conducted. 2. Assessment stage: The assessor shall be a coach of Level 2 or above; after passing the stage assessment, the student can proceed to the next stage of learning; if the stage assessment is failed, the assessor shall determine the additional training content and hours required. 3. Mastering operational essentials: Article 2 states that students must master the basic operational essentials of driving and possess the fundamental ability to control a vehicle; they must proficiently master the basic methods of driving in confined spaces and on internal roads, possess the ability to reasonably use vehicle controls and correctly manage the spatial position of the vehicle, and be able to accurately control the vehicle's position, speed, and route.
11
2
Share

Which year does the 8.5th generation Accord refer to?

The 8.5th generation Accord refers to the 2013 model year. The so-called differences between the 8th generation and 8.5th generation mainly lie in the latter having some additional interior and functional features, while the chassis, handling, engine, and space remain unchanged. Therefore, these two models are essentially the same. Below are some relevant details about the 8.5th generation Accord: 1. Body dimensions: The increase in size and space is a significant highlight of the 8th generation Accord. Its length, width, and height reach 4945mm, 1845mm, and 1480mm respectively, with a wheelbase of 2800mm. In terms of size classification, the 8th generation Accord's category changed from "mid-size" to "full-size" according to the U.S. Environmental Protection Agency (EPA), with dimensions and space comprehensively surpassing previous models. The spacious dimensions can meet customers' demands for comfort and space. 2. Interior: The all-new interior design fully showcases a high-end and stylish tone. The dashboard is innovatively divided into an upper information area and a lower control area, making the design more ergonomic. The 8th generation Accord's interior significantly reduces the use of environmentally polluting PVC materials and the content of VOC (volatile organic compounds) harmful to human health, fully reflecting Honda's care for the environment and people.
3
3
Share

How Long Can a Car from the Early 2000s Still Run?

If there is no severe damage and timely maintenance is performed, the car should have no issues for at least three to four years. This also depends on the vehicle's condition. As long as it passes the motor vehicle inspection, it can continue to be driven on the road. Below is additional information: 1. Pay attention to maintenance and timely inspections: Non-commercial small and micro vehicles do not have a fixed service life. Even if the car is already 15 years old, if it has been well-maintained and cared for, it can still operate normally without needing to be scrapped or replaced with a new one. However, for safety reasons, vehicles over 15 years old are required to undergo inspections twice a year. If they pass the inspection, they can continue to be used. 2. Mandatory scrapping: Registered motor vehicles should be mandatorily scrapped under the following circumstances: if they still fail to meet the relevant national safety and technical standards for in-use vehicles after repair and adjustment; if, after repair, adjustment, or the application of control technology, the pollutants or noise emitted into the atmosphere still do not meet the relevant national standards for in-use vehicles; or if they fail to obtain the motor vehicle inspection mark for three consecutive inspection cycles after the expiration of the inspection validity period.
6
0
Share

What are the body dimensions of the Buick GL8?

The Buick GL8 has a body length, width, and height of 5256mm, 1878mm, and 1776mm respectively, with a wheelbase of 3088mm. Below is an introduction to the Buick GL8: 1. The Buick GL8 is a classic top-tier MPV under the Buick brand, equipped with a 3.0L VVT V6 engine that delivers a maximum horsepower of 178 and a top speed of 168km/h. 2. The new GL8 features a fresh family design language, making its exterior more youthful and stylish. The front fascia adopts a new design with an electroplated and painted process that enhances the texture of the front grille. The chrome surround of the grille connects with the headlights, and the headlight design on both sides of the grille has been redesigned. The rear incorporates more curved lines, creating a stronger sense of layering. 3. The new model has a slightly increased body height and features a multi-spoke two-tone wheel design, which is very distinctive. The tire specifications are 225/60-R17, using Continental ComfortContact CC6 tires, significantly improving ride comfort and noise reduction. The rear suspension has been upgraded from the current torsion beam non-independent suspension to a multi-link independent suspension, giving the vehicle a more upscale and refined overall appearance.
13
2
Share

What type of vehicle is the WEY VV7?

WEY-VV7 is the first model under the WEY brand owned by Great Wall Motors. The power specifications of the WEY-VV7 series include a 2.0T engine paired with a 7-speed wet dual-clutch transmission. The vehicle was officially launched at the 2017 Shanghai Auto Show. Below is additional information: 1. The WEY-VV7 is the production version of the SUV model, retaining the exterior design of the W01 concept, which the manufacturer describes as a "leopard-inspired" front fascia, featuring a honeycomb grille paired with full LED lighting. 2. In terms of dimensions, the vehicle measures 4749mm in length, 1931mm in width, and 1655mm in height, with a wheelbase of 2950mm, positioning it as a midsize SUV. 3. The WEY-VV7 series will also include the sportier VV7s and the standard VV7c variants. The VV7s boasts a more aggressive front-end design with a wavy grille and new front bumper styling. At the rear, it features a more pronounced quad-exhaust setup with dual outlets on each side.
2
5
Share

How to Determine if a Used Car is an Accident Vehicle?

Methods to determine if a used car is an accident vehicle mainly include: 1. Check the hood screws: Open the hood and go straight to the hood screws. Since the screws on the engine compartment cover have a paint surface, if the paint on these screws is damaged, it may not necessarily mean it's an accident vehicle, but it definitely indicates that the hood has been removed. Generally, the hood is only removed for repairs after a significant front-end collision, so this situation should be noted carefully. 2. Inspect the engine compartment: In the car's engine compartment, you can see the left and right front longitudinal beams. If the screws on them appear to have been turned, compare both beams—if they are consistent, it’s normal. Then, check if the radiator support (also known as the "dragon frame") has been replaced by looking for the original manufacturer’s label on its front. Additionally, inspect the edges of the engine hood for smoothness in the rubber seals and whether they feel soft to the touch. If the seals are uneven or feel soft, it likely means the hood has been repaired. 4. Examine the paint: Scratches on the car can be identified by checking the paint. Light scratches can be concealed with a polisher, while deep ones require repainting. Repainted areas may be hard to detect with the naked eye, but uneven thickness can be felt by hand.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.