···
Log in / Register

What are the requirements for applying for a B1 driver's license?

3 Answers
EliLee
08/28/25 2:41am
B1 driver's license cannot be directly applied for; it can only be obtained through an upgrade. The application conditions are as follows: 1. Before upgrading to a B1 driver's license, you must have held a driving qualification for urban buses, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for at least three years; or have held a qualification for large trucks for at least two years. Additionally, you must not have accumulated 12 penalty points in any of the last three scoring cycles before the application. 2. The applicant's age must be between 21 and 60 years old. 3. Furthermore, those who have caused a fatal traffic accident with primary or full responsibility, have a record of drunk driving, or have a record of speeding over 50% are not eligible to apply for a B1 upgrade. 4. After meeting all the corresponding conditions, you can apply at the vehicle management office. 5. Following a series of reviews, including a medical examination, you will begin theoretical and practical training at a designated driving school. 6. The B1 driver's license test consists of three parts: Subject 1, Subject 2, and Subject 3. Subject 1 is a test on traffic and road regulations, similar to Subject 1 for a C1 driver's license; Subject 2 is a skills test on a closed course, equivalent to Subject 2 for a C1 driver's license; Subject 3 is a road test, just like Subject 3 for a C1 driver's license.
Was this review help?
7
0
Share
StLuna
09/09/25 8:04am
I've passed the B1 driver's license test, let me share the application requirements: you must be at least 18 years old, being too young doesn't meet the criteria. You need to pass a physical examination with qualified vision, such as corrected visual acuity of 0.8 or above, and no epilepsy or color blindness issues. An ID card is mandatory, bring the original to the driving school for registration. The learning process requires attending formal driving school training, covering written tests on traffic rules and practical road exercises. The exam is divided into two parts: first pass the theory test, then the road test, and you can only get the license after passing both. Budget several thousand yuan for the fees, practice reversing and emergency braking techniques more during training, and pay attention to safety details. Don't rush, systematic training for two to three months is the most reliable.
Was this review help?
13
0
Share
Expand All
RobertDella
10/24/25 2:08am
As someone who has been through the process, the main requirements for obtaining a B1 driver's license are: the minimum age is 18 years old, passing the health examination is mandatory, including vision, hearing, and hand mobility. A valid personal ID is essential, and I recommend registering for training at a reputable driving school. During the training period, you must learn traffic regulations and driving skills. The test consists of a theoretical exam (Subject 1) and practical assessments (Subjects 2 and 3). Remember to bring photos for the license application, and don't slack off during the process—practice gear shifting and obstacle avoidance diligently. Regular health check-ups after obtaining the license are also crucial.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Is it okay if the car scraped the chassis?

If the car scraped the chassis without any fluid leakage or mechanical deformation, it should be fine. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the power from the engine to make the car move and maintain normal driving. The composition of the car chassis: it consists of the transmission system, steering system, driving system, and braking system. The maintenance methods for the car chassis are: 1. Check the oil condition of each important assembly in time; 2. Pay attention to the wear of brake pads and clutch plates; 3. Regularly perform four-wheel alignment; 4. Pay attention to the tire pressure and wear condition.
8
5
Share

How to Replace a Faulty Spark Plug?

To replace a faulty spark plug, follow these steps: 1. Wait for the engine to cool completely, open the hood, unplug the high-voltage pack connector, and remove the fixing bolts; 2. Use a socket wrench to loosen the nuts by turning counterclockwise; 3. Use a magnetic rod to extract the spark plug; 4. Attach the new spark plug to the magnetic rod and insert it into the hole; 5. Reassemble by following the above steps in reverse order; 6. Start the engine to check if the spark plug is functioning properly. The reasons for a faulty spark plug include: 1. Insufficient spark energy during ignition; 2. Excessive air-fuel ratio in the fuel mixture; 3. Overheating of the engine; 4. Dirty air filter; 5. Excessive idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seal or crankcase ventilation valve.
4
4
Share

Why is it difficult to engage reverse gear in a manual transmission?

The reasons why it is difficult to engage reverse gear in a manual transmission are: 1. The gear is not engaged and is in neutral; 2. The gear switch of the transmission is faulty; 3. The clutch is not fully depressed; 4. The synchronizer is not installed, causing the teeth to misalign with the gear; 5. The handbrake is not released, leaving the car in manual braking state. The steps to start a manual transmission car are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch; 2. Shift the transmission into first gear; 3. Press or lift the electronic handbrake button; 4. Ensure safety by observing the road and other vehicles or pedestrians; 5. Continue to hold the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
14
5
Share

What is the Volkswagen Teramont 330TSI?

Volkswagen Teramont 330TSI is the Volkswagen Touareg 330TSI model. Here are the specific details about the Volkswagen Touareg: 1. Powertrain: The Touareg is equipped with three powertrain options, including a 2.0T high/low-power version and a 2.5T V6 engine. The Touareg 330TSI model features a 2.0T engine with a maximum power output of 186 horsepower and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The power of the 330TSI model can meet the basic needs of daily driving. 2. Features: The vehicle comes with a multimedia information display that supports the App-Connect smartphone integration platform, compatible with Apple CarPlay and Android Auto. It also includes adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof.
19
3
Share

What Causes the Jerking Sensation When Releasing the Clutch After Shifting Gears?

The reasons for experiencing a jerking sensation when releasing the clutch after shifting gears are: 1. Jerking during upshifting: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the driver's throttle input, resulting in a jerking sensation during gear changes. 2. Jerking during downshifting: When the driver releases the accelerator pedal or presses the brake pedal, the alternator starts working, placing a load on the engine and causing a mismatch between the engine speed and the clutch disc speed, leading to a jerking sensation. The working principle of the clutch is: 1. The torque generated by the engine is transmitted to the driven disc through the friction between the flywheel, pressure plate, and the contact surface of the driven disc. 2. When the driver depresses the clutch pedal, the diaphragm spring's large end moves the pressure plate backward through mechanical linkage, separating the driven components from the driving components.
20
4
Share

How to Turn Off a Motorcycle Alarm?

There are several methods to turn off a motorcycle alarm: you can directly use the key to turn on the power switch, which will deactivate the alarm state. When the key is not available, simply unplug the power connector and then plug it back in to deactivate the alarm state. Below is additional information about power locks: 1. By voltage: Power locks can be categorized into low-voltage power locks and high-voltage power locks based on voltage levels. Low-voltage power locks are mainly used in small appliances, electric toys, and electric vehicles. High-voltage power locks are primarily used in machine tools, elevators, etc. 2. By the number of controlled circuits: Power locks can be divided into single-circuit power locks, dual-circuit power locks, and multi-circuit power locks. A single-circuit power lock can only control one circuit. A dual-circuit power lock can simultaneously control two circuits.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.