What are the requirements and conditions for obtaining a driver's license?

1 Answers
JeffreyRose
07/29/25 4:06pm
The requirements and conditions for obtaining a driver's license are as follows: 1. Age: The age limit for applying for a small car or small automatic transmission car driver's license has been relaxed, with no upper age limit. Individuals aged 70 and above can apply, provided they pass memory, judgment, and reaction ability tests if they meet the physical conditions. 2. Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 3. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the requirement is at least 4.9. 4. Color vision: No red-green color blindness. 5. Hearing: Ability to distinguish the direction of a sound source with each ear at a distance of 50 cm from a tuning fork.
Was this review help?
8
0
Share
More Forum Discussions

What does D+ mean in an automatic transmission?

D+- in an automatic transmission refers to the manual mode of the automatic gearbox. While retaining the automatic gear-shifting function, it also simulates manual gear-shifting, allowing more car models to break free from the constraints of traditional automatic transmissions and giving drivers the freedom and enjoyment of manual gear-shifting. Here are specific details about D+ in automatic transmissions: When driving downhill, you can shift up to D2 or D3 using "D+": Downhill driving requires the engine's braking effect. Gears 2/3 provide sufficient power without requiring high torque. Sometimes, when climbing uphill with ample power, you may also need to shift up using "D+" to prevent power wastage and damage to the engine and transmission. In manual mode, drivers can shift gears by operating "D+" and "D-": Pushing the gear lever toward "D+" shifts up one gear, while pushing it toward "D-" shifts down one gear.
18
4
Share

How to remove the seat belt buckle on the Trumpchi GS8?

To remove the seat belt buckle on the Trumpchi GS8, first use a screwdriver to pry open the plastic buckle and take it off, then you can replace it with a new one. Finally, reinstall the plastic buckle. Car buckles are divided into two types by material: plastic buckles and nylon buckles. The following situations require the seat belt to be replaced: 1. In some cases, if the seat belt has undergone a strong tensile load once, it should be replaced even if it is not damaged. 2. If the airbag deploys and bursts in an accident, the seat belt also needs to be replaced. 3. If the retractor in the seat belt structure ages and the seat belt cannot tighten or retract properly, it should also be replaced.
4
5
Share

Reasons for Poor Performance of Car Windshield Defrosters

Specific reasons for the poor performance of car windshield defrosters are as follows: 1. The reasons for poor performance of car windshield defrosters include broken resistance wires, poor grounding of resistance wires, and switch damage. Other causes may include relay failures, etc., which require timely repair. When the resistance wire break is short, it can be repaired using conductive material based on epoxy resin, then covered with adhesive tape. If the break is too long to repair easily, the rear window glass should be replaced. 2. Introduction to the front window defroster: The car front window defroster uses warm air from the heating system blown onto the glass to defrost. The front window defroster consists of a blower, warm air inlet and outlet ducts, and defroster nozzles. 3. Introduction to the rear window defroster: Cars use a thermoelectric defroster for the rear window. The thermoelectric defroster integrates resistance wires directly into the glass layer, using the car's own current to heat the resistance wires for defrosting. This method is only applicable to the rear window.
9
5
Share

How to cancel the automatic start-stop function in Audi A4?

Audi A4L automatic start-stop deactivation method: Press the automatic parking A button next to the gear lever. More information about Audi A4L is as follows: 1. On November 16, 2008, FAW Audi officially released the domestically produced new Audi A4L. The new Audi A4L adopted a brand-new exterior and chassis design, with the front and rear resembling the Audi A5. 2. The Audi A4L is equipped with Audi dynamic steering system, which can change the transmission ratio according to the driving speed and the selected Audi driving mode. It offers flexible operation at low speeds and stable operation at high speeds, working closely with the ESP system to enhance safety performance. The combination of radar sensors and LED warning lights on the rearview mirror improves active safety during driving.
17
3
Share

How to Avoid Excessive Vehicle Exhaust Emissions?

Detailed introduction on avoiding excessive vehicle exhaust emissions is as follows: 1. Regularly inspect the vehicle's catalytic converter: The catalytic converter filters out toxic and polluting gases from the exhaust. Maintain its cleanliness by conducting periodic inspections. If it is found to be aged or excessively dirty, replace or clean it promptly to ensure compliance with exhaust emission standards. 2. Use high-quality fuel according to the manufacturer's fuel quality standards: Vehicle owners should select the appropriate gasoline grade based on fuel quality standards and avoid using gasoline that falls below the standard quality. 3. Check if the vehicle components are functioning normally: With prolonged use, the wear and tear on vehicle components increase, leading to aging and decreased performance.
8
4
Share

How to Find the Half-Clutch State of a Car?

Here is a detailed introduction on how to find the half-clutch state of a vehicle: 1. Listen to changes in the engine sound to locate the half-clutch state: When the engine is under no load, the sound is relatively relaxed. If you lift the clutch to the point where power transmission begins, the engine sound will become deeper, especially when the car is under a heavy load, the reaction is more noticeable. 2. Feel the engine vibration to determine if the car is in the half-clutch state: When the clutch is lifted to the half-clutch position, the car will transition from stationary to moving with a noticeable vibration, indicating that the clutch is precisely in the half-clutch state. 3. Observe the tachometer's RPM to identify the half-clutch state: During the process of lifting the clutch, when the engine RPM on the tachometer drops significantly, it confirms that the clutch has reached the half-clutch point.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.