What are the renewal methods after the compulsory traffic insurance lapses?

1 Answers
SophieFitz
07/29/25 6:35pm
There are mainly three methods for renewing the compulsory traffic insurance after it lapses. Below is a detailed introduction to these three renewal methods: 1. Renew through the insurance company's business outlets: The policyholder only needs to bring the vehicle license and a copy of their ID card to the insurance company's business outlet to handle the renewal. 2. Entrust a 4S shop to renew the insurance: The price of insurance purchased by a 4S shop on behalf of the car owner is more expensive than other methods, but the one-stop maintenance and claim service of the 4S shop can save the car owner a lot of time and effort. 3. Renew by phone: The car owner can directly call the insurance company's phone number and follow the voice prompts to purchase the insurance.
Was this review help?
19
4
Share
More Forum Discussions

What is the fuel consumption of the BJ80?

BJ80's fuel consumption varies depending on the model. Taking the Beijing BJ80 2019 2.3T Automatic Shengshi Huazhang Edition as an example, its official combined fuel consumption is 11.2 liters per 100 kilometers. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to derive the theoretical experimental fuel consumption data for the model. In terms of power, the Beijing BJ80 2019 2.3T Automatic Shengshi Huazhang Edition is equipped with a 2.3-liter inline four-cylinder turbocharged engine with a cast iron structure, delivering a maximum power of 170 kW and a maximum torque of 345 Nm. It is paired with a 6-speed automatic manual transmission and features a front-engine, four-wheel-drive configuration.
13
1
Share

How to Solve the Problem of Truck Brake Locking?

Truck brake locking solutions: 1. Force start, increase throttle until the rear wheels move; 2. Remove the tire, use a hammer or similar tool to tap the brake drum a couple of times to loosen the contact surface between the brake drum and the brake pads. Reasons for truck brake locking: 1. Water ingress in the braking system; 2. Insufficient stiffness of the brake disc; 3. Improper fit of the brake pads. Methods to prevent truck brake locking: 1. After washing the car or when the brake drum gets wet in the rain, do not park immediately. Drive for a while and apply the brakes a few times to allow the moisture to evaporate, or when parking, do not use the handbrake. For manual transmissions, engage first gear, and for automatic transmissions, engage P gear; 2. Apply intermittent braking instead of slamming the brakes all the way, which not only wears out the tires but also makes it harder to stop.
10
0
Share

What to Do When a Mercedes-Benz Protection System Malfunction Prevents Starting?

Mercedes-Benz displays that the reasons for the protection system malfunction preventing the car from starting are: 1. Blown fuse; 2. Open circuit in the high-voltage coil or low-voltage circuit; 3. Damaged spark plug; 4. Fuel pump failure; 5. Blocked fuel line; 6. Cylinder leakage with no pressure; 7. Carburetor failure. More information about Mercedes-Benz is as follows: 1. Introduction: Mercedes-Benz is a German brand, and its models include: Mercedes-Benz E-Class, S-Class, G-Class, GLC, GLS, GLE, Maybach S-Class, etc. 2. Taking the Mercedes-Benz GLC as an example: its body dimensions are: length 4729mm, width 1890mm, height 1602mm, wheelbase 2873mm, fuel tank capacity 66L, and the body structure is a 5-door, 5-seat SUV.
9
2
Share

Is N Gear for Forward Movement?

N gear is not for forward movement; it is the neutral gear of a vehicle. The neutral gear is used during temporary stops and when the vehicle is being towed. It is a unique gear for automatic transmission models. It is important to note that you should never shift to N gear when coasting downhill in a motor vehicle. The gears of an automatic transmission model include D gear (drive gear) for forward movement, N gear (neutral gear), R gear (reverse gear), P gear (parking gear), S gear (sport mode), and L gear (low-speed mode). Since automatic transmission models lack a clutch pedal, acceleration can be achieved simply by controlling the throttle. Additionally, in sport mode and manual mode, free gear shifting can be performed. When driving an automatic transmission model, you only need to press the vehicle's brake pedal to shift gears, reducing the frequency of manual gear shifting and effectively decreasing driver fatigue.
19
4
Share

How to reset the maintenance indicator light on Haval H6?

The method to reset the maintenance reminder on Haval H6 is: turn off the ignition, press and hold the button at the lower right of the instrument panel; turn the ignition to the position where all instrument lights are on, release the button when the small wrench symbol on the instrument panel stops flashing; press the button at the lower left of the instrument panel, and the small wrench symbol will disappear, indicating the maintenance reminder has been reset. Below is more information about the Haval H6: 1. The dimensions of the Haval H6 are: length 4653mm, width 1886mm, height 1730mm, with a wheelbase of 2738mm. 2. The Haval H6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, maximum power of 155kW, and maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.
20
4
Share

How many models does Wuyang-Honda 125 have?

Wuyang-Honda 125 motorcycles include models such as Xisha, Yusha, Kaiying, Xunsha, WH125, Fengxiang 125, Huansha, and Little Rocket. A 125 motorcycle refers to a motorcycle equipped with a 125cc engine. Wuyang-Honda Motorcycle (Guangzhou) Co., Ltd. is a Sino-Japanese joint venture jointly invested by Guangzhou Automobile Group Co., Ltd., Honda Motor Co., Ltd. of Japan, and Honda Motor China Investment Co., Ltd. Taking the Wuyang-Honda Xisha 125 as an example, its body dimensions are 1795mm in length, 680mm in width, and 1085mm in height, with a wheelbase of 1245mm. It features a 125ml engine displacement, a curb weight of 103kg, and a fuel tank capacity of 6 liters.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.