What are the regulations for vehicle annual inspection time?

2 Answers
AndresFitz
07/29/25 8:14am
Vehicle annual inspection time regulations are as follows: 1. For passenger transport vehicles, inspections are required once a year within the first 5 years, and every 6 months thereafter; 2. For trucks and large or medium-sized non-passenger transport vehicles, inspections are required once a year within the first 10 years, and every 6 months thereafter; 3. For small and mini non-passenger transport vehicles, inspections are required once every 2 years within the first 6 years, once a year thereafter, and every 6 months after 15 years; 4. For motorcycles, inspections are required once every 2 years within the first 4 years, and once a year thereafter. Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles based on the technical conditions for safe operation of motor vehicles, aiming to promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents, commonly known as vehicle inspection.
Was this review help?
10
4
Share
EvangelineFitz
08/12/25 11:26am
As an ordinary car owner, I remember there are rules for vehicle annual inspections. Generally, new cars are exempt from inspection for the first 6 years, but you need to collect an inspection sticker on the 12123 App every two years. For cars older than 6 years, you have to visit the inspection station once a year. My old car, which is 10 years old, requires an inspection every six months. It’s a bit of a hassle, but it’s mainly to check emissions and safety performance, like brakes and lights. If you miss the deadline, you might face fines or points deducted. I once delayed it by a few days and got fined 200 yuan, so now I set reminders on my phone and prepare the materials a month in advance. By the way, maintenance is also crucial—regular oil changes help avoid excessive emissions, saving money and trouble. Everyone, remember to do it on time and don’t slack off—safety comes first when driving.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Where is Lubo Tire manufactured?

Lubo Tire is produced by Shandong Huasheng Rubber Co., Ltd. Here are specific details about Lubo Tire: 1. Company Profile: Lubo is a brand registered and established by Shandong Huasheng Rubber Co., Ltd. on September 21, 2008. Lubo Tire is a cost-effective truck and bus tire, manufactured with genuine German imported technology. It features reinforced tire body steel wires and bead structure, wide tire shoulders, and four longitudinal main grooves, combined with a specialized tread formula to ensure excellent heat dissipation performance. 2. Brand Categories: Car inner tubes, vehicle tires, bicycle tires, tricycle tires, pneumatic tires, vehicle solid tires, adhesive patches for inner tube repair, car tires, complete sets of tools for inner tube repair, vehicle tires, and car tires.
8
4
Share

What are headlights, clearance lights, and rear position lights?

Here is the relevant introduction about headlights, clearance lights, and rear position lights: 1. Headlights: Headlights refer to the lighting devices installed on both sides of the front of a car, used for road illumination during nighttime driving. They can be categorized into two-lamp and four-lamp systems. The illumination effect of headlights directly affects nighttime driving operations and traffic safety. 2. Clearance lights: Clearance lights are warning lights used to alert other vehicles. They are usually located at the outermost edges of the front and rear of the vehicle. Large trucks also have clearance lights on the roof and sides. 3. Rear position lights: Rear position lights, along with front position lights, are commonly referred to as small lights or width indicator lights. Their main purpose is to indicate the presence and approximate width of the vehicle, helping other vehicles judge during encounters and overtaking.
12
2
Share

How long is the validity period for new vehicle inspection?

For the first 6 years, new vehicles are exempt from inspection, but the annual inspection sticker must be renewed every 2 years at the vehicle management office. The materials required for the biennial sticker renewal during the six-year exemption period are as follows: 1. For individual vehicle inspection: original vehicle license, copy of compulsory traffic insurance, ID card copy, and the vehicle. 2. For company vehicle inspection: original vehicle license, copy of compulsory traffic insurance, organization code certificate of the People's Republic of China (with fresh seal), power of attorney (with fresh seal), agent's ID card copy, and the vehicle. Vehicles eligible for the inspection exemption only need to fill out the 'Motor Vehicle Inspection Sticker Application Form' at the vehicle management office, motor vehicle registration service station, or traffic police squadron to receive the motor vehicle inspection sticker and vehicle license.
12
4
Share

What kind of glue should be used for car dashboard delamination?

Use universal glue. The following is relevant information about the dashboard: 1. Introduction: The car center console is the area that controls comfort and entertainment devices such as air conditioning and audio systems. It includes the central control door lock system, allowing the driver to operate all door switches and window lift systems. A fully touch-sensitive center console refers to a design that replaces traditional physical buttons and knobs with capacitive touch controls, similar to a smartphone screen, where light touches, presses, or swipes can complete operations. 2. Advantages and disadvantages: A fully touch-sensitive center console significantly enhances the vehicle's sense of technology and premium feel. However, it requires precise positioning and must allow a certain reaction time and pressing force for the touch-sensitive buttons. Operations like adjusting volume or temperature can lead to errors if the sensing time is too short or the finger pressure is too light.
11
3
Share

Can Car Shock Absorbers Be Replaced One by One?

Car shock absorbers cannot be replaced one by one; they need to be replaced together when damaged. Different models of car shock absorbers have varying parameters, and inconsistent specifications on both sides can lead to unbalanced vehicle sides during driving, affecting driving safety. The function of shock absorbers: to mitigate road impacts, absorb vibrations generated during bumps, and restore the vehicle to normal driving conditions. The working principle of shock absorbers: when relative motion occurs between the frame or body and the axle due to vibrations, the piston inside the shock absorber moves up and down. The oil in the shock absorber cavity repeatedly flows from one cavity to another through different pores. The friction between the pore walls and the oil, as well as the internal friction between oil molecules, creates a damping force that converts the vehicle's vibration energy into thermal energy of the oil, which is then absorbed and dissipated into the air by the shock absorber.
17
1
Share

What are the new driving license test regulations?

2021 new driving test regulations are as follows: 1. Test subject adjustment: For small automatic transmission vehicles, the "slope fixed-point parking and starting" item in Subject 2 test is canceled, reducing the test content from the original 5 items to 4 items. This change aims to better align with actual driving requirements and reduce the test burden for candidates. 2. Test scheduling adjustment: For obtaining a small automatic transmission vehicle driving license, the interval between Subject 1 pass and Subject 3 test scheduling is shortened from 30 days to 20 days; For those upgrading to medium/large passenger or truck licenses, this interval is shortened from 40 days to 30 days. 3. Cross-region subject test adjustment: For small vehicle license applicants, the number of permitted test location changes is increased from 1 time to no more than 3 times, meeting the demand for cross-region testing.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.