What are the regulations for using temporary vehicle license plates?

1 Answers
ClaytonDella
07/30/25 4:26am
Vehicle temporary license plate usage regulations are: 1. It should be affixed to the lower left or right corner of the front windshield, in a position that does not obstruct the driver's view; 2. If there are two temporary license plates, one should be affixed to the front windshield, and the other should be affixed to the lower left corner of the rear windshield inside the vehicle. If there is no space on the rear windshield, the other temporary license plate should still be carried in the vehicle. Temporary license plates are paper motor vehicle license plates that allow temporary road use of the vehicle, issued by the public security vehicle management department before the vehicle is officially registered. The temporary license plate will indicate its validity period, which can be 15, 30, or 90 days. Temporary license plates must be used within the validity period. If the official license plate has not been obtained after the expiration of the temporary license, a new application must be submitted, but the number of applications cannot exceed three times.
Was this review help?
6
1
Share
More Forum Discussions

What Happens If You Add a Bottle of Mineral Water to a Car's Fuel Tank?

Adding a bottle of mineral water to the fuel tank may damage the engine. Below is relevant information about fuel tanks: 1. General Classification: Fuel tanks can be divided into open-type and closed-type. Open-type tanks have their liquid surface connected to the atmosphere, equipped with an air filter on the tank cap. Open-type tanks are simple in structure, easy to install and maintain, and are commonly used in hydraulic systems. Closed-type tanks are typically used for pressurized tanks, filled with a certain pressure of inert gas, with a charging pressure of up to 0.05MPa. 2. Classification by Shape: They can also be categorized into rectangular tanks and cylindrical tanks. Rectangular tanks are easy to manufacture and convenient for placing hydraulic components, making them widely adopted. Cylindrical tanks offer high strength, light weight, and easy cleaning, but are more difficult to manufacture and occupy more space, often used in large metallurgical equipment.
6
4
Share

What is the reason for the engine tachometer not displaying?

The reason for the engine tachometer not displaying may include sensor failure or odometer damage. Disconnect the sensor connector, turn on the ignition switch, and locate the No. 2 electrode connected to the brown base with red stripe in the connector. Use a self-made wire with a plug to extend it and lightly scratch the grounding area of the vehicle body to input a pulse signal to the instrument. If the speedometer needle moves at this time, it indicates the instrument is normal, and the fault lies in the sensor reed switch tube or magnetic ring. In this case, it is recommended to contact a professional for repair. Connect a flexible shaft-type wire between the transmission and the odometer. During inspection, disconnect the transmission side and manually rotate it if it is not broken. The odometer should show movement. If the odometer does not move, it is recommended to check the odometer side and the odometer itself. If the wire is broken, it needs to be replaced.
19
4
Share

Which city does the license plate Lu Q belong to?

Lu Q license plate belongs to Linyi City, Shandong Province. The license plate codes for cities in Shandong Province are as follows: Lu A Jinan City, Lu B Qingdao City, Lu C Zibo City, Lu D Zaozhuang City, Lu E Dongying City, Lu F Yantai City, Lu G Weifang City, Lu H Jining City, Lu J Tai'an City, Lu K Weihai City, Lu L Rizhao City, Lu M Binzhou City, Lu N Dezhou City, Lu P Liaocheng City, Lu Q Linyi City, Lu R Heze City, Lu S Laiwu City, Lu U Qingdao City, Lu V Weifang City, Lu Y Yantai City. License plate is the common name for vehicle registration plate, which are plates hung on the front and rear of a vehicle, usually made of aluminum, iron, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information.
5
4
Share

What Causes the Noise When the Brake Pedal is Released?

The reason for the noise when the brake pedal is released is either an incorrect contact angle between the brake pads and the brake disc or the recent replacement of new brake pads. If this occurs, the owner can visit a professional institution to have a specialist adjust it. Below is an introduction to the brake system: 1. Introduction: As the name suggests, it is a mechanical braking device that can slow down the vehicle, also known as a decelerator. 2. Structure: The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake lever to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc. 3. Function: To slow down or stop the vehicle. The manual brake in a car is located next to the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc-shaped caliper brakes to slow down.
16
3
Share

What does interval speed measurement mean?

Interval speed measurement involves setting up two adjacent monitoring points on the same road section. The average speed of a vehicle on that road section is calculated based on the time it takes for the vehicle to pass between these two monitoring points. The system then determines whether the vehicle has exceeded the speed limit according to the road's speed regulations. Simultaneously, the information of traffic violators is displayed in real-time on LED screens to notify and warn more vehicles. The interval speed measurement system conducts real-time monitoring and captures images of vehicles passing through the monitored area of the road checkpoint. It collects data such as the vehicle's speed, traffic flow, license plate number, color, approximate physical dimensions, and driver characteristics. This information is then transmitted via a network to the database of the public security traffic command center and the traffic control sub-center for data storage, querying, comparison, and other processing.
11
5
Share

How many reverse lights does a Jetta have?

Jetta has 2 reverse lights, located below the rear fog lights and brake lights. The reverse lights are white in color, providing high visibility. Car reverse lights are installed at the rear of the vehicle to illuminate the road behind when reversing and serve as a warning to vehicles and pedestrians behind. The bulb model for the Volkswagen New Jetta reverse light is w16w-T15. The replacement method is as follows: Open the trunk, and you will see a cover at the back of the taillight. Open the left side of the cover and use a tool to unscrew the two screws of the taillight. After removing the two screws, try to take down the entire taillight. Place a towel underneath the taillight to avoid scratching the lens. The bulb holder and lens are secured with clips and need to be separated slowly to remove the bulb holder. After unscrewing, replace it with a new reverse light bulb.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.