What are the regulations for the use of temporary license plates for motor vehicles?

1 Answers
McBeau
07/29/25 2:10pm
Before the official license plate is issued, new vehicles usually have a temporary license plate. The regulations for temporary license plates are mainly divided into three parts. The following is a detailed introduction: 1. Types of temporary license plates: (1) Sky blue background with black characters and black frame lines, limited to driving within the city, which is the local temporary license plate; (2) Brown-yellow background with black characters and black frame lines, which can be used for cross-city driving, also known as the non-local temporary license plate; (3) In addition to the temporary license plates for ordinary household vehicles, there are also temporary license plates for test motor vehicles and special-type motor vehicles. Their appearance is similar to ordinary temporary license plates, but they usually have a "test" or "special" text identifier. 2. Situations requiring temporary license plates: (1) When driving from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase; (2) When transferring vehicle registration and the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original place; (3) When a new vehicle in the local area that has not yet obtained an official license plate needs to be driven to another place for modification, a temporary license plate must be applied for locally. After modification, a temporary license plate must be applied for at the local place to drive back to the original area; (4) When a vehicle purchased locally needs to be driven to another place, a temporary license plate must be applied for locally to drive to the other place; the same applies in reverse. (5) When the vehicle registration is not yet fixed and temporary trial use is needed. 3. Validity period of temporary license plates: The validity period will be indicated on the temporary license plate, which is 15, 30, or 90 days. The temporary license plate must be used within the validity period. If the official license plate has not been obtained after the validity period expires, a new application must be made, but the number of applications cannot exceed three times.
Was this review help?
15
1
Share
More Forum Discussions

Where is the fuel pump relay located on the JAC Refine?

JAC Refine's fuel pump relay is located on the right driver's side. Open the storage compartment, and you will find it in the upper right corner inside the engine compartment's fuse box. Here is some information about the fuel pump relay: 1. How to locate the JAC Refine relay position: Turn the ignition key, and you will hear the relay engage. Have someone listen for the sound of the relay when it is powered on to locate it. It is mounted on the side metal plate near the engine compartment fuse box. It is a standalone four-pin relay, which can be cross-checked to identify the ignition relay. 2. Function of the fuel pump relay: The fuel pump relay primarily uses a very small current to control a high-power circuit, expanding the control range. When the signal reaches a certain threshold, it can switch, disconnect, or connect multiple circuits simultaneously based on the contact group's configuration, achieving automatic switching. Another function is to adjust the fuel pump's opening and closing status as needed to ensure the engine operates normally.
6
4
Share

Can Leather Seats Be Wiped with Alcohol?

Yes, but after disinfecting with alcohol, you need to use a damp, clean towel to wipe the vehicle seats again to remove any residual alcohol. Excessive use can harden the leather and cause cracks, so it's recommended to use specialized leather care products. 1. Precautions: Leather seats require maintenance but are not resistant to sun exposure. Prolonged exposure to sunlight can harden the leather and even cause cracking. Avoid leaving the seats under direct sunlight for extended periods to prevent fading. After cleaning, do not use a hairdryer to dry the leather quickly. Instead, use cotton paper or a soft towel to dry it gently to avoid scratching. Alternatively, let it air dry in a cool, ventilated area. 2. Proper Cleaning Method: Avoid using chemical cleaners. Also, minimize the use of so-called leather protectants, as they can make the leather dependent. If you stop using them, the leather may lose its luster. For cleaning leather seats with mild soap, soak a clean, soft towel in warm water, apply an appropriate amount of soap evenly on the towel, and then gently wipe the seats (repeatedly for creases).
5
5
Share

Where should the steering wheel align with the dashed line in Subject 2?

Dashed line is the right side of the second dashed line from the right when the center of the steering wheel is aligned, and then use the wiper to align with the right line. Here are the relevant introductions: 1. Master the basics: Subject 2 requires students to master the basic driving operation essentials and have the basic ability to control the vehicle. Be proficient in the basic methods of driving on the site and internal roads, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route. 2. Failed exam: If the Subject 2 exam is failed, the applicant needs to pay the retake fee at the vehicle management office first. According to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", each subject can be taken once, and if the exam is failed, it can be retaken once.
16
3
Share

What Do the Left and Right Feet Control When Driving?

Left foot controls the clutch, right foot controls the accelerator and brake. Below are the related introductions: 1. Clutch: Press the clutch quickly, and release it slowly after shifting gears. After shifting to second gear, when the clutch reaches the engagement point, you can release the clutch while pressing the accelerator; sudden forward movement occurs when releasing the clutch and pressing the accelerator too quickly, causing the speed to increase rapidly. When first learning to drive, controlling the force of releasing the clutch and pressing the accelerator will prevent issues. 2. Engagement point: After shifting gears, you can gradually press the accelerator, then release the clutch. When the clutch reaches the engagement point, there will be a noticeable increase in speed. Pay attention to the force applied when pressing the accelerator.
10
5
Share

What are the reasons why the car key remote cannot open the trunk?

There are several reasons why the car key remote cannot open the trunk: failure of the key transmitter; malfunction of the car receiver; door lock failure; key battery depletion, etc. Below is relevant information about car smart keys: 1. Introduction: A car smart key is a common keyless entry system, also known as an intelligent key system. It consists of a control system composed of a transmitter, a remote central lock control module, a driving authorization system control module (three receivers), and related wiring harnesses. 2. Function: The vehicle can enter a locked or unlocked state based on signals from the smart key, and can even automatically close windows and the sunroof.
7
1
Share

Does the Height of the Seat Affect Reverse Parking in Subject 2?

Subject 2 seat height affects reverse parking. Here are the relevant details: 1. Height: Use an object inside the car as a reference, such as how much of the wiper or spray nozzle is exposed, to determine the seat height. 2. Distance: When adjusting the seat distance, count the number of notches the seat moves forward and remember this number to set the seat distance. 3. Backrest: When adjusting the backrest, ensure your shoulders are close to the backrest, extend your arms, and your wrists should just rest on the steering wheel to set the backrest position. 4. Subject 2: Tasks like hill starts, right-angle turns, and reverse parking require visual references, and adjusting the seat changes these references. If the seat height is unsuitable for the driver, errors may occur during reverse parking.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.