···
Log in / Register

What are the regulations for non-local vehicles in Beijing?

3 Answers
DiXavier
07/28/25 12:23pm
Beijing's regulations for non-local vehicles are as follows: 1. From 7:00 to 9:00 and 17:00 to 20:00 on weekdays, non-local vehicles are prohibited from entering roads within the Fifth Ring Road; 2. From 9:00 to 17:00 on weekdays, traffic management measures for peak-hour restrictions based on the last digit of the license plate are implemented, with the restricted area being roads within the Fifth Ring Road. The rotation method for license plate tail numbers follows the rotation method for Beijing motor vehicle license plate tail numbers. In addition, there are strict restrictions for certain types of vehicles such as trucks, special operation vehicles, and yellow-label vehicles: 1. From 6:00 to 24:00 daily, trucks and special operation vehicles are prohibited from entering roads within the Sixth Ring Road; 2. Motorcycles are prohibited from entering roads within the Sixth Ring Road at all times; 3. For yellow-label vehicles from other provinces, districts, or cities, no Beijing entry permit will be issued, and they are prohibited from entering main roads within the Sixth Ring Road and county towns in the suburbs of the city at all times.
Was this review help?
3
5
Share
DelGavin
08/11/25 5:10pm
During my daily commute in Beijing, I'm well aware of the restrictions on non-local license plates. On weekdays during the morning and evening rush hours, vehicles with non-local plates are prohibited from entering areas within the 5th Ring Road, specifically from 7:00 AM to 9:00 AM and 5:00 PM to 8:00 PM. This regulation has been enforced for several years, primarily to alleviate traffic congestion, and it's proven quite effective in a megacity like Beijing. When my out-of-town friends visit, they often get fined 100 yuan and receive penalty points due to unfamiliarity with the rules, which is quite frustrating. I'd advise non-local vehicle owners to check the traffic restriction calendar in advance to avoid peak hours, or consider traveling on weekends or holidays when there are no restrictions. Additionally, a Beijing Entry Permit can be applied for temporary passage rights, though the process is somewhat cumbersome, requiring appointment and document submission. Overall, while the rules are strict, they benefit the overall traffic order. Personally, I've noticed much smoother driving conditions, and it also helps reduce emissions, supporting environmental protection.
Was this review help?
1
3
Share
Expand All
RafaelFitz
09/28/25 6:53am
As a novice driver who just learned to drive, I have checked the traffic restriction rules for out-of-town vehicles in Beijing. Basically, vehicles are prohibited from driving within the Fifth Ring Road during weekday morning and evening rush hours, specifically from 7:00 to 9:00 in the morning and from 17:00 to 20:00 in the evening. The regulations are mainly aimed at controlling congestion and reducing emissions, with violators facing a fine of 100 yuan and 3 penalty points. Interestingly, a Beijing Entry Permit must be applied for in advance for temporary passage, which can be conveniently done through the WeChat public account 'Beijing Traffic Police.' I tried driving there on weekends when there were no restrictions, and it was quite free. Additionally, out-of-town electric vehicles are now partially exempt. The general advice is to plan trips to avoid crowded times or switch to public transportation, with safety being the top priority.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the engine speed at 120 mph on the highway?

During normal driving, when the car speed reaches 120 mph, the engine speed is mostly between 2000 rpm and 3000 rpm. Assuming the clutch plate is functioning normally without slipping, a manual transmission car requires shifting to the corresponding gear at certain speeds for proper operation. Under normal driving conditions, the highest gear engine speeds are as follows: When the speed reaches 100 km/h, the engine speed is generally around 2800 rpm; when the speed reaches 110 km/h, the engine speed is typically around 3200 rpm. Engine speed is a physical quantity representing the ratio of the number of rotations to time, commonly expressed in engineering as speed = number of rotations / time. It is an important parameter describing the rotational motion of an object. Factors determining engine speed: Transmission ratio: The same vehicle speed can result in different engine speeds, depending on the vehicle's transmission ratio. With a higher transmission ratio, the engine needs to rotate many times to drive the wheels for one complete rotation. Gear: The engine's power is not directly used as the driving force for the car wheels; the power needs to be processed through the gearbox. This is a key reason why shifting gears is necessary when driving. Different gears matched with different speeds allow the engine to avoid excessively high speeds, thereby reducing fuel consumption and achieving the goal of saving driving costs.
12
4
Share

What are the fuel-saving tips for a 6-speed automatic transmission with manual mode?

Fuel-saving tips for a 6-speed automatic transmission with manual mode are as follows: 1. Reduce weight to save fuel: Minimize the vehicle's load and avoid full-load operation as much as possible. 2. Proper starting technique for fuel efficiency: To save fuel, first develop good driving habits. When starting, release the foot brake to let the vehicle roll slightly before gently accelerating. Rapid starts not only harm the vehicle but also waste fuel. 3. Maintain a reasonable speed: Drive at an appropriate and steady speed, as speeding up or slowing down unnecessarily wastes fuel. 4. Shift gears appropriately: When driving at certain speeds where both higher and lower gears can be used, shift to the higher gear in time to keep the vehicle running close to the most fuel-efficient speed for each gear. 5. Proper maintenance for fuel efficiency: Regularly inspect, adjust, and clean the vehicle to ensure optimal air-fuel mixture, thereby improving fuel economy.
17
3
Share

Can You Get a Driver's License with Poor Eyesight?

Yes, you can get a driver's license with poor eyesight. If your corrected vision (with glasses) reaches 4.9 or above on the logarithmic visual acuity chart, you can apply for a Class C license. However, if you have amblyopia in one or both eyes, with uncorrected vision below 4.9 and no possibility of correction, you do not meet the requirements for a driver's license and cannot take the test. For large buses, medium buses, tractors, city buses, large trucks, trolleybuses, or trams, the uncorrected or corrected vision must reach 5.0 or above on the logarithmic visual acuity chart. The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulate in Article 12 that applicants for a motor vehicle driving license must meet the following vision requirements: For large buses, tractors, city buses, medium buses, large trucks, trolleybuses, or trams, the uncorrected or corrected vision must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the uncorrected or corrected vision must reach 4.9 or above on the logarithmic visual acuity chart. Therefore, if your uncorrected vision does not meet the standard, you can still qualify for a driver's license by wearing glasses or other corrective measures to achieve 4.9 or above on the logarithmic visual acuity chart. Driver's license test requirements for physical examination: Height: For large buses, tractors, city buses, large trucks, or trolleybuses, the height must be at least 155 cm. For medium buses, the height must be at least 150 cm. Vision requirements: For large buses, medium buses, tractors, city buses, large trucks, trolleybuses, or trams, the uncorrected or corrected vision (with glasses) must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the uncorrected or corrected vision must reach 4.9 or above. Color vision: No red-green color blindness. Hearing: Must be able to distinguish the direction of sound at a distance of 50 cm from a tuning fork in each ear. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal movement and function. Lower limbs: Normal movement function. For manual transmission vehicles, the difference in leg length must not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. Torso and neck: No movement dysfunction. Driver's license test content: Subject 1: After registration, applicants must attend a face-to-face lecture before scheduling the Subject 1 test. Subject 1 is a written test consisting of 100 multiple-choice and true/false questions, with one point per question. A score of 90 or above is required to pass. Subject 2: Subject 2 consists of five mandatory tests: reverse parking, parallel parking, hill start, curve driving, and right-angle turns. The test is scored out of 100, with a passing score of 80 or above. Subject 3: Subject 3 is a road test that includes preparation before driving, starting, straight-line driving, gear shifting, lane changing, parking, passing through intersections, left and right turns, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and simulated lighting operations. Subject 4: Subject 4 can be taken the day after passing Subject 3. It consists of 50 questions, including multiple-choice and single-choice questions, with a full score of 100. A score of 90 or above is required to pass.
11
3
Share

What to Do When a Nail is Stuck in the Tire Without Air Leakage?

If a nail is stuck in the tire while driving without causing air leakage, it is recommended not to pull out the nail by yourself. Here are some relevant introductions about a nail stuck in the tire: 1. Solution: Drive the car to a professional tire shop and let the staff pull out the nail and check the puncture. Since the tire is in a rolling state while driving, the nail may not be vertically stuck into the tire. If it is pulled out without timely repair, it may damage the tire sidewall, which may make it impossible to repair. 2. Situations where a nail-stuck tire cannot be repaired: (1) Damage to the tire sidewall cannot be repaired. (2) A puncture hole in the tire crown with a diameter exceeding 6 mm cannot be repaired. (3) Other situations include damaged or deformed bead, deformed tread, rubber corroded by chemicals, or damage caused by running the tire flat.
17
4
Share

What Are the Reasons for No Response When Turning the Vehicle Key?

There are many potential reasons why a car key fails to start the engine. It could be due to a dead battery, wiring issues, insufficient fuel, or problems with components in the fuel system, ignition system, or exhaust system. Below are more relevant details: 1. Car Gear Position: An incorrect gear position can also prevent the car from starting. Generally, the P (Park) or N (Neutral) gear is the correct position for starting an automatic transmission vehicle. If the driver accidentally leaves the gear in R (Reverse) or another position, it may not only fail to start but also pose a safety hazard. 2. Car Electrical Circuit: If the issue is related to the electrical circuit, the failure to start may occur suddenly. Common faults that cause no response when turning the key include blown fuses, open circuits in the high-voltage coil or low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.
6
0
Share

Do modern cars still have a water tank?

Yes, cars do have a water tank. Here is some relevant information about car water tanks: 1. The liquids added to the water tank: The water tank near the front of the car is for adding windshield washer fluid, while the one near the car's windshield is for adding antifreeze. Neither windshield washer fluid nor antifreeze can be replaced with tap water. 2. The difference between antifreeze and water: Antifreeze has a boiling point above 120 degrees Celsius, whereas water boils at only 100 degrees Celsius. Using antifreeze in cars can prevent "boiling over" in the summer. Using water instead of antifreeze can easily lead to scale buildup and requires frequent replacement, whereas antifreeze does not have these issues. Water can also be somewhat corrosive to the cooling system, while antifreeze includes anti-corrosion and anti-rust properties.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.