What are the regulations for motorcycles on highways?

1 Answers
DelOwen
07/30/25 9:23am
Here are the regulations regarding motorcycles on highways: Introduction 1: According to the 'Highway Traffic Management Regulations of the People's Republic of China', although two-wheeled motorcycles are allowed on highways, riders must wear helmets and protective gear, maintain a speed not exceeding 80 kilometers per hour, must not carry passengers, and should drive safely in the right lane of the driving lane. Introduction 2: Article 83, Section 5 stipulates: The cargo compartment of trucks on highways must not carry people. Two-wheeled motorcycles must not carry passengers when driving on highways. Introduction 3: According to Article 67 of the 'Road Traffic Safety Law of the People's Republic of China' (hereinafter referred to as the Road Traffic Law), pedestrians, non-motor vehicles, tractors, wheeled special mechanical vehicles, articulated buses, full-trailer towed vehicles, and other motor vehicles with a design maximum speed of less than 70 kilometers per hour are not allowed to enter highways. The above regulations do not include a prohibition on motorcycles.
Was this review help?
1
0
Share
More Forum Discussions

How many colors does the Porsche 911 have?

Porsche 911 comes in a total of 8 colors. The details are as follows: The colors of Porsche 911 include: Guards Red, Carrara White, Racing Yellow, Basalt Black, Arctic Silver, Ruby Star, Riviera Blue, Racing Green. The models of Porsche 911 include: Porsche 911 models include Turbo S 3.8T, Carrera Cabriolet 3.0T, Carrera 4S Cabriolet 3.0T, etc. Porsche SUV models: Porsche SUV models are Cayenne E-Hybrid, Macan, Cayenne.
11
4
Share

What causes the alarm to keep sounding after locking an Audi A4?

Audi A4 car alarm keeps sounding after locking: The anti-theft alarm sensitivity is too high. There is a sensitivity adjustment knob on the vibration sensor of the anti-theft alarm, which can be fine-tuned; The door grounding wire is faulty, commonly known as the door switch failure. The alarm adjustment box is usually located under the dashboard, with adjustment knobs that can be tweaked by yourself. Alternatively, you can seek help from the professional who installed the alarm. Precautions for locking the car: Using a mechanical key is safer than using a smart key, as it avoids interference from signal jammers. When using a mechanical lock, ensure the doors are properly closed and listen for the sound of all doors locking to confirm the car is securely locked. Check if the lights flash after locking. If using an electronic lock, observe whether the car is properly locked by checking if the lights flash or if the side mirrors automatically fold. If any abnormality is noticed, promptly check for signal interference sources nearby. Pull the door handle to confirm locking. After locking, it's advisable to habitually pull the door handles to ensure the doors are locked. Be gentle when pulling to avoid damaging the door switch mechanism.
9
2
Share

What Problems Does a Car Battery Fault Indicate?

Car battery fault indications include the following problems: Illumination of the car battery warning light or battery swelling: When the car battery warning light on the dashboard illuminates, it should be taken seriously. The illumination of this light indicates that the car battery has already developed a fault. Alternatively, if the battery shows signs of swelling, there are generally two causes: prolonged overcharging or blockage of the battery's vent holes. Both scenarios signify battery faults. Dimming of headlights: Power for the car's headlights, brake lights, and audio system comes from the car battery. If the headlights become noticeably dimmer or the brake lights appear weak when braking, it indicates that the car battery is nearing failure. This occurs because, during idling, the car's charging power decreases, preventing the battery from supplying adequate voltage, which in turn causes the lights to dim. Difficulty starting the car: If the car, which normally starts without issues, suddenly becomes difficult to start, it suggests a problem with the car battery. The battery may be nearing the end of its life and can no longer supply power properly. In such cases, the battery should be replaced immediately; otherwise, the car may become undrivable.
14
4
Share

How to Deal with Static Electricity in Cars?

The methods to handle static electricity in cars are: 1. Place a humidifier inside the car; 2. Install a static discharger on the roof; 3. Place a damp towel on the dashboard. The causes of static electricity in cars are: 1. Charge accumulated by the human body, generated by friction between skin and clothing; 2. Static electricity generated by the car itself, caused by friction between the car body and dust in a dry environment; 3. Friction between the owner's clothing and the car's interior. Static electricity is a stationary charge or a non-flowing charge, which can be divided into positive static electricity and negative static electricity. When accumulated in the human body to a certain extent, it can cause abnormal current conduction in brain nerve cell membranes.
7
1
Share

Do New Cars Need Antifreeze and Windshield Washer Fluid?

New cars do not require additional antifreeze as they come with factory-installed antifreeze, which typically needs replacement every two years or 30,000 kilometers. Windshield washer fluid should be replenished as needed based on usage, generally requiring top-up when depleted. The antifreeze replacement procedure is as follows: Before performing a complete antifreeze change, conduct a thorough inspection to check for leaks or cracks in all hoses, with particular attention to the five-way water pipe. Antifreeze circulates through this pipe before being distributed to various parts of the vehicle. If leaks are detected in this area, replace the hose or reseal connections as necessary. Drain the old antifreeze, then flush the cooling system with clean water. Fill the antifreeze reservoir with water and continue adding water until it flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the discharged water may appear slightly pinkish—continue flushing until the outflow runs clear. Remember to disconnect the heater hose and drain the heater core completely. Approximately one hour after draining, add new antifreeze through the radiator hose. Then fill the antifreeze reservoir nearly to the top with another container of antifreeze. Start the engine for about 10 minutes—this allows the cooling system to purge air, causing the fluid level to drop. Top up the antifreeze to the "MAXT" mark on the reservoir.
10
1
Share

Vehicle Inspection: Should You Go to the Vehicle Management Office or the Inspection Station?

Vehicle inspection requires visits to both the vehicle management office and the inspection station. Differences between the vehicle management office and the inspection station: The vehicle management office primarily handles applications for motor vehicle driving licenses, replacements, renewals, inspections, and other related services for vehicles and drivers. On the other hand, the inspection station focuses on comprehensive performance testing for motor vehicles. While the two are related, their differences are quite distinct. Vehicle inspection process: After the six-year exemption period or for vehicles requiring on-site inspections, the normal procedure is to first visit the inspection station for the inspection and then proceed to the vehicle management office for the official stamp. However, in some regions where the inspection station and vehicle management office are interconnected, the entire inspection process may be completed directly at the inspection station.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.