···
Log in / Register

What are the regulations for applying for and using motor vehicles?

4 Answers
EmmanuelMarie
08/26/25 3:55am

Regulations for applying for and using a driver's license: Applicants for a driver's license should submit the required materials to the local vehicle management office. Upon receiving the application, the vehicle management office should promptly review the authenticity and completeness of the materials. If the application meets the requirements, the driver's license should be issued. Relevant information about the driver's license is as follows: Introduction: The Motor Vehicle Driver's License of the People's Republic of China, commonly referred to as a driver's license or "driver's permit," is a mandatory document for motor vehicle drivers, established in accordance with the laws of the People's Republic of China. Examination content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).

Was this review help?
17
1
Share
LaLawson
09/08/25 4:52am

I just got my driver's license a year ago and would like to share some experience regarding motor vehicle application and usage regulations. To apply for a license, you first need to register at a driving school, pass a medical examination, and then take both theoretical and road tests - only after passing these can you obtain the license. When driving, strictly follow traffic rules: check brakes and lights before driving, fasten seat belts, avoid speeding or drunk driving, and children must use safety seats. Vehicles require annual inspections, and after licensing, exhaust modifications aren't allowed. Violations result in point deductions and fines - losing all points means retaking the test. Since being a beginner, I've developed habits like daily pre-drive vehicle checks, maintaining safe distances to prevent accidents. These regulations make roads safer, giving me much more confidence when going out now. Regularly learning traffic rules helps reduce violation risks.

Was this review help?
19
4
Share
Expand All
DelCamilla
10/22/25 4:56am

As a seasoned driver with over a decade of experience, I keep all the motor vehicle application and usage regulations firmly in mind. When applying for a driver's license, one must undergo medical examinations and tests to ensure physical fitness for driving. Regarding vehicle usage, regular annual inspections are required to check if brakes and emissions meet standards; speed limits must be obeyed, no drunk driving, no fatigued driving, and avoiding speeding at night. Safety comes first—I always remind my family to buckle up and not to park haphazardly occupying lanes. The regulations also include driver's license management, requiring renewal every two years, with possible suspension for repeated traffic violations. Experience tells me that following the rules reduces accident risks, protecting both myself and others, and maintaining patience while driving is more important than anything else.

Was this review help?
13
1
Share
Expand All
MacVivienne
12/05/25 5:20am

As a car enthusiast, I pay attention to the details of motor vehicle application and usage regulations. Application process: First, pass a physical examination and driver's license test, with theoretical learning covering traffic signal rules. During usage, vehicles must be registered and licensed, undergo regular emission and safety performance inspections; mobile phone use is prohibited while driving, traffic signals must be obeyed, and maintaining normal speed is required to avoid rear-end collisions. These regulations incorporate technological elements, such as special subsidy policies for electric vehicles and mandatory scrapping and renewal of old vehicles. Compliance ensures efficient vehicle operation and reduces emission pollution. A deeper understanding of the regulations can assist in vehicle selection and maintenance.

Was this review help?
2
5
Share
Expand All
More Forum Discussions

Where is the coolant filling location?

Coolant is added from the coolant reservoir, which is located in the engine compartment. Open the engine hood to see it. The method and steps for filling coolant are as follows: 1. Tighten the radiator drain switch and fill the radiator with coolant until it overflows. The usual filling amount is 4~5L. 2. Tighten the radiator filler cap. 3. Fill the engine coolant reservoir until the liquid level reaches the full mark. 4. Warm up the engine until the thermostat valve opens. 5. Turn off the engine and wait until the coolant cools down. 6. Remove the radiator filler cap and check the coolant level.
6
0
Share

What is the difference between D gear and S gear in a car?

The following are the differences between D gear and S gear: 1. D gear stands for Drive gear, which is present in all automatic transmission vehicles. After shifting into D gear, the vehicle's computer will shift gears according to the preset program. S gear is the Sport mode, where the computer's shifting logic changes, delaying upshifts to provide stronger power. 2. The advantage of D gear is that it is more fuel-efficient compared to S gear, but the downside is that it offers less power and is not as responsive. The advantage of S gear is better vehicle performance, while the disadvantage is poorer fuel economy. It is suitable for use during overtaking or climbing hills.
15
5
Share

Can a New Car Use the License Plate from an Old Car?

You can use the license plate from your old car on a new car, but only under certain conditions: 1. The license plate must be registered under the same vehicle owner's name. 2. The license plate must be from the same registration location. For example, a plate starting with 'Lu Q' can only be replaced with another 'Lu Q' plate. 3. The license plate must be of the same type. For instance, a yellow license plate can only be replaced with another yellow plate; a blue plate can only be replaced with a blue one; and a green plate can only be replaced with a green one. 4. The vehicle must be non-commercial. Only private, household-use vehicles are eligible for plate transfers. 5. For vehicles that have undergone a plate swap, you must wait for one year before applying for another swap or to retain the original license plate number.
17
3
Share

What type of gasoline should a BMW 5 Series use?

BMW 5 Series uses 95 octane gasoline. More details are as follows: 1. 95 octane gasoline consists of 95% isooctane and 3% n-heptane. High-compression engines require high-octane gasoline. Using low-octane gasoline in high-compression engines may cause abnormal combustion, resulting in knocking, increased fuel consumption, and reduced driving power. 2. The BMW 5 Series has dimensions of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. It is a 4-door, 5-seater sedan with an 8-speed automatic transmission, a top speed of 230 km/h, and a turbocharged intake system.
1
3
Share

What is the standard tire pressure for the Elantra?

The standard tire pressure for the Hyundai Elantra is 2.4-2.5bar. There may be slight variations depending on specific conditions, such as seasons and load. Different models and vehicles may have minor differences in tire pressure, which can be found on the fuel tank cap, the side of the driver's door, or in the user manual. Related information is as follows: 1. Almost all car manufacturers do not recommend adjusting tire pressure based on seasonal changes. This is because when a vehicle is driven normally, the temperature inside the tires increases significantly, and this temperature difference far exceeds the seasonal temperature variations. Therefore, seasonal changes have a negligible impact on the working temperature inside the tires. Adjusting tire pressure based on the season is not very meaningful. 2. If the tire pressure is severely insufficient, such as below 1.5bar, the tires may repeatedly flex during driving, causing the sidewall temperature to rise excessively, which can lead to the risk of a tire blowout.
20
4
Share

Should You Shift Gears or Release the Handbrake First When Parking an Automatic Transmission Car

When parking an automatic transmission car, you should shift to P (Park) first before releasing the handbrake. The specific reasons are as follows: 1. Many car owners are accustomed to only shifting to P when parking, which may not cause issues on flat ground, but it's absolutely not acceptable on slopes. In an automatic transmission, the P position has a pawl and gear mechanism at the end of the output shaft. When the transmission is shifted to P, the pawl presses down and engages with the gear, achieving a locking effect. 2. If you attempt to push the car while it's only in P, the vehicle can move slightly. This is because there is a significant engagement gap between the pawl and the gear. Additionally, the P position pawl and gear have a self-protection mechanism: once the pushing force reaches a certain level, the pawl will disengage to avoid damaging the transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.