What are the reasons why the Wuling Zhiguang won't start?

1 Answers
DiDante
07/29/25 4:44pm
Wuling Zhiguang won't start for the following reasons: 1. Electrical or electronic failure: The phenomenon occurs very suddenly without any warning. Electrical failures include: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, damaged spark plug. Electronic failure mainly refers to the loss of function of the central computer control board. 2. Fuel system failure: Engine shutdown caused by fuel system failure is often accompanied by symptoms such as weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations of fuel system failure include: fuel pump failure, blocked fuel line, clogged fuel filter, carburetor failure, nozzle damage, etc. 3. Mechanical failure: Common mechanical failures include: timing belt (chain) breakage, cylinder leakage with no pressure, etc. The second situation is when the starter motor doesn't work or barely works. In this case, the first thing to check is the battery or accumulator.
Was this review help?
16
4
Share
More Forum Discussions

What Causes Abnormal Noises When Driving on Rough Roads?

Abnormal noises when driving on rough roads can be caused by the following reasons: Friction between car components: It may be the sound of friction from the rubber bushings securing the suspension stabilizer bar, or related components of the interior trim panels rubbing against each other. Lack of lubrication in the steering column dust cover: If the steering column dust cover lacks lubrication, it can produce dry friction sounds. Applying some grease inside the dust cover can eliminate the noise. Abnormal noise from the steering column universal joint: The front end of the steering column is equipped with a universal joint. If the universal joint lacks lubrication, it will produce abnormal noises, and lubrication is required.
5
5
Share

Can Shunting Locomotives Run Long Distances?

No. The single factor of insufficient power alone determines that shunting locomotives cannot be used as mainline locomotives. Below is an introduction to shunting locomotives: 1. Introduction: A shunting locomotive refers to a locomotive specifically used for train marshalling and disassembly operations in marshalling yards or shunting areas. 2. Operational Requirements: The requirements for shunting locomotives include having a high starting acceleration, the ability to easily pass through switches and curves with small radii, and a cab design that facilitates frequent directional changes. Therefore, such locomotives mostly feature an external walkway structure and a single cab. They have a high starting tractive force but a relatively low maximum operating speed. In the past, China did not have specialized steam shunting locomotives and generally used older freight locomotives as substitutes. After the advent of diesel locomotives, China successively produced the Dongfeng 5, Dongfeng 7, and Dongfeng 12 series of diesel shunting locomotives.
4
4
Share

Why is the reversing camera light always on?

System settings issue. When reversing, the light is usually turned on to make it easier to see the rear. Below is a related introduction to the reversing camera: 1. Overview: The reversing camera, also known as the parking assist system, or reversing visual system, vehicle monitoring system, etc. English name: vehicle backup camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. 2. Function: This system provides a more intuitive and clear view of the rear when reversing, making it one of the most practical configurations for reversing safety. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera located at the rear of the vehicle, displaying a clear image of the rear on the reversing LCD screen, allowing the driver to accurately grasp the road conditions behind and reverse as smoothly and confidently as moving forward.
1
5
Share

What is the appropriate tire pressure for winter and summer?

In winter, the appropriate tire pressure for cars is around 2.6-2.7 bar, while in summer, it is around 2.3-2.4 bar. Normal tire pressure reference standards: According to the international GBT2978-2008 standard, the tire pressure for standard tires is around 2.4-2.5 bar, while for reinforced tires, it is around 2.8-2.9 bar. In winter, the standard tire pressure for car tires should be appropriately increased by about 0.2 bar, whereas in summer, the tire pressure can generally be about 0.1 bar lower than the standard limit to prevent tire blowouts due to high temperatures. Daily tire pressure precautions: Cars are generally equipped with a tire pressure monitoring system that alerts drivers to tire leaks and abnormal tire pressure to ensure driving safety. Daily attention should be paid to the tire pressure monitoring light on the instrument panel, as both excessively low and high tire pressure can affect driving performance and increase tire wear.
20
1
Share

Main Components of an Engine?

Engine components include: the engine block group, the crankshaft and connecting rod mechanism, the valve train, the fuel supply system, the ignition system, the cooling system, the lubrication system, and the starting system. An engine is a machine capable of converting other forms of energy into mechanical energy, applicable both to power generation devices and to the entire machine including the power unit. The engine consists of two major mechanisms and five major systems, namely the valve train, the crankshaft and connecting rod mechanism, the ignition system, the cooling system, the lubrication system, the starting system, and the supply system.
11
5
Share

Is Vehicle Inspection and Pickup Not on the Same Day?

Generally, the vehicle inspection and pickup should be completed on the same day. When purchasing a new car, pay attention to checking the following aspects: Exterior: When picking up the new car, inspect the car's exterior under sufficient lighting to check for color differences in the paint and any scratches or dents. Interior: Check the car seats for wrinkles, any unusual odors inside the car, and dirt in the corners to avoid picking up a flood-damaged vehicle. Glass: Inspect the production dates of the car windows. Generally, the production dates of car windows may vary, but they should not exceed one year.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.