···
Log in / Register

What are the reasons why the Wuling Rongguang cannot start?

4 Answers
SkylarFitz
09/06/25 2:25am

The reasons why the Wuling Rongguang cannot start include battery failure, spark plug failure, excessive carbon buildup, and unstable fuel system pressure. Battery failure: If the car battery is dead or malfunctioning, the car naturally cannot start. In this case, it is necessary to charge or replace the battery promptly. Spark plug failure: The spark plug is a key component in the car's ignition system, and its working condition affects the vehicle's performance and efficiency. If the spark plug fails, it should be replaced. Excessive carbon buildup: Excessive carbon buildup in the vehicle can also prevent it from starting, so it is necessary to regularly clean the carbon deposits at a repair shop. Unstable fuel system pressure: If the vehicle's fuel pump cannot supply fuel properly, it may lead to poor fuel atomization or failure to open the fuel injectors, causing cylinder misfire, shaking, or failure to start. In this case, the vehicle should be inspected and repaired at a 4S shop. The Wuling Rongguang has dimensions of 3695mm in length, 1495mm in width, and 1860mm in height, with a wheelbase of 2500mm. It is equipped with a 1.2L multi-point fuel injection engine, delivering a maximum power of 60kW and a maximum torque of 103 Nm.

Was this review help?
16
3
Share
Jay
09/18/25 2:32am

I've been driving this type of van for over ten years. When the Wuling Zhiguang fails to start, it's usually a battery-related issue. An old battery with low voltage may show no response when cranking; or corroded/loose terminals causing poor contact can lead to starting failure. In cold weather, the battery tends to lose charge easily, requiring jump-starting. Last time my vehicle had the same issue - dashboard lights were dim, and it turned out to be a loose negative cable that was fixed by tightening. I recommend regularly checking battery lifespan, avoiding prolonged parking without starting, and keeping some basic repair tools in the vehicle. Another possibility could be a faulty starter motor, producing clicking sounds without engine turnover. Maintaining these components properly makes daily driving much more worry-free.

Was this review help?
9
5
Share
Expand All
StIker
11/01/25 2:57am

I think the reasons for difficult engine starting, such as in cars like the Wuling Zhiguang, are often related to fuel supply. When the fuel pump isn't working properly, insufficient oil pressure fails to deliver fuel; or the fuel line is clogged, with a dirty filter preventing fuel from entering the engine. Last time I encountered this issue, the engine shook a few times after starting and then stalled, and it turned out to be excessive sediment buildup at the bottom of the fuel tank causing a blockage. It could also be due to excessive carbon deposits in the fuel injectors, which need cleaning. Regularly using high-quality gasoline helps prevent this. It's advisable to check the fuel system and listen for a humming sound when the fuel pump starts. Additionally, low fuel levels can cause air to enter the fuel line, so try adding sufficient fuel. Simple maintenance can avoid a lot of trouble.

Was this review help?
12
1
Share
Expand All
OHayden
12/15/25 3:05am

Wuling Zhiguang starting failure is commonly caused by ignition component issues. Damaged spark plugs or failure to ignite, aging high-voltage coils leading to weak transmission, result in poor starting. Loose wiring connections can also interrupt signals. Try replacing the spark plugs yourself for a quick fix. Observe engine response during inspection for fast and cost-effective repairs.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

What does the inspection validity period mean?

The inspection validity period refers to the validity period of the driver's license inspection. Below are the required documents for driver's license inspection: 1. Identification: Resident ID card (for those holding ID cards from other provinces or cities, a temporary residence permit is also required) and a copy. 2. Original driver's license: The original motor vehicle driver's license and the currently held driver's license. 3. Photos: Three recent 1-inch white-background color photos. 4. Medical report: A qualified medical examination report from a district or county-level hospital or above. Such hospitals usually have medical examination points near the vehicle management office or traffic police station. 5. Application form: The applicant should obtain the 'Motor Vehicle Driver's License Application Form' at the vehicle management office and fill it out according to the instructions.
18
4
Share

What Are the Hazards of Flood-Damaged Cars?

Flood-damaged cars have the following hazards: 1. Hazard one: The biggest hazard lies in the electrical circuits, which may malfunction at any time, even leading to the car breaking down and failing to start. These faults are troublesome to diagnose and repair, and the maintenance costs are relatively high. 2. Hazard two: After being soaked in water, interior components such as seat foam, carpets, and soundproofing materials can breed mold and bacteria, leading to unpleasant odors and even viruses that pose health risks to passengers. 3. Hazard three: The metal surfaces of the car body will accumulate mud and sand due to water immersion, and the absorbed moisture will cause rust over time, affecting the strength and rigidity of the car body and creating safety hazards.
6
5
Share

What is the position of the car gear lever called?

The position of the car gear lever is called the gear shift console. Here is a detailed introduction about it: 1. Introduction 1: The gear lever, also known as the operation lever, is used on the car transmission and its main function is to support the car's gear shifting. 2. Introduction 2: The gear lever is a rod-like component, commonly divided into 1-2 gear levers, 3-4 gear levers, and five-gear levers. 3. Introduction 3: From a technical perspective, electronic gear levers have a high degree of freedom, with flexible and varied positions and forms. Currently, representative types include BMW's electronic wiring type, Mercedes-Benz's column-mounted type, Land Rover's rotary knob type, and Lincoln's button type.
15
4
Share

What is the function of a car tachometer?

The functions of a car tachometer are as follows: 1. Display engine speed: It reflects whether the engine is operating at normal speed and serves as a barometer for the engine's working condition. When the engine is idling or in neutral, the speed should be stable and within a reasonable range. When pressing the accelerator pedal in neutral, the speed should change smoothly with the steady rise and fall of the pedal. When holding the accelerator pedal steady, the tachometer needle should remain fixed at a certain speed mark. 2. Serve as a reference for manual transmission gear shifting: Selecting the appropriate gear shifting timing allows the engine to always operate within the most economical working range. The engine's torque reaches its maximum only within a certain range. Beyond this range, the torque will drop significantly, resulting in insufficient engine power, sluggish car acceleration, or even gear dragging and stalling.
11
0
Share

Where is the car air conditioning sight glass hole located?

Car air conditioning sight glass hole is located in the engine compartment. Here are detailed explanations about it: 1. Explanation one: It's normal to see bubbles in the refrigerant sight glass. Every vehicle's air conditioning system will show a small amount of bubbles in the sight window because there's inevitably some gas mixed in when refrigerant is collected into bottles during production. 2. Explanation two: The standard refrigerant charge should be determined either according to the standard refrigerant filling quantity marked on the product nameplate of the air conditioning system, or by roughly estimating the appropriate refrigerant charge based on the operating state parameters of the air conditioning refrigeration system pipelines. 3. Explanation three: Generally, the high pressure of car air conditioning systems is around 150, and the low pressure is around 30 (these two values are marked on refrigerant gauges). This represents the optimal pressure state for most air conditioning systems.
13
2
Share

What are the engine specifications of the Touran?

The Touran's engine has a maximum power of 110kW, maximum horsepower of 150, and maximum torque of 250Nm, with the model designation EA111. The Touran engine is a Sino-German joint venture, produced by Shanghai Volkswagen, and is classified as a domestically manufactured engine. For daily maintenance of the Touran engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.