What are the reasons why the windshield washer fluid of Volkswagen Bora cannot spray out?

1 Answers
MatthewAnn
07/29/25 10:47am
The reasons why the windshield washer fluid of Volkswagen Bora cannot spray out are: 1. Dust clogging at the nozzle; 2. Lack of windshield washer fluid; 3. Blown fuse, no response from the motor; 4. Using tap water or self-made unqualified windshield washer fluid to clean the windshield, causing internal pipe scale blockage. Taking the 2021 Volkswagen Bora as an example, it belongs to the compact car category, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, wheelbase of 2688mm, and a fuel tank capacity of 50l. The 2021 Volkswagen Bora has a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.5l naturally aspirated engine, with a maximum horsepower of 113ps, maximum power of 83kw, and maximum torque of 145nm.
Was this review help?
14
0
Share
More Forum Discussions

How to Reset the Maintenance Light on a BMW 3 Series?

BMW 3 Series maintenance light reset method: 1. Turn off the ignition switch, shut off the engine (KEY-OFF). 2. Press the button at the lower left corner of the instrument panel. 3. Turn on the ignition switch (illuminate the instrument panel). 4. Hold the lower left button for 5 seconds until "OILSERVICE" or "INSPECTION" and "RESET" appear. 5. Release the button, then press and hold it again for about 5 seconds until "RESET" starts flashing. 6. Release the button, then press and hold it again. 7. The new maintenance interval will be displayed. 8. Press the button again, and "ENDSIA" will appear. 9. The reset is complete.
10
1
Share

What is the range of BYD electric vehicles?

A fully charged BYD electric vehicle can travel up to 500 kilometers. Here are some details about it: 1. This car is a pure electric vehicle with a range of 500 kilometers, a maximum torque of 660, a maximum power of 360, and a 0-100 km/h acceleration time of 4.6 seconds, which is excellent. The motor type is a permanent magnet synchronous motor, featuring a front and rear dual-motor setup, with a battery capacity of 82.8; 2. The transmission is a fixed gear ratio transmission, the chassis is a dual-motor four-wheel drive, and the front and rear suspension types are MacPherson independent suspension and multi-link independent suspension; 3. It is equipped with five airbags and passive pedestrian protection, lane change assist, etc., and comes with front and rear parking sensors, a 360-degree panoramic camera, rear cross-traffic alert, full-speed adaptive cruise control, and an electric induction trunk that can be remotely started; 4. It features leather seats with adjustable front and rear positions, backrest, height, leg support, and lumbar support. The seats can be heated and ventilated, and the car comes with a navigation system and road condition display. The voice system is very powerful, and the car has internet connectivity. The lighting system includes LED matrix headlights, which are very stylish; 5. In terms of configuration, it has a lane departure warning system, lane keeping assist system, road traffic sign recognition, and automatic emergency braking. These configurations are very user-friendly and offer high value for money when used in the car. The driving mode can be switched to sport, economy, or snow mode, making the driving experience perfect.
13
5
Share

What is the method for adding refrigerant oil to a car's air conditioning system?

Generally, there are two methods for adding refrigerant oil to the air conditioning system: the direct filling method and the vacuum suction method. The details are as follows: 1. Direct filling method: The direct filling method simply involves pouring the refrigerant oil directly into the compressor through the plug opening, which is very convenient. 2. Vacuum suction method: (1) Evacuation: Use a specialized vacuum tool to remove the air from inside the air conditioning system. (2) Negative pressure suction: After the air inside the air conditioning system is removed, use negative pressure to draw the refrigerant oil into the compressor through a yellow hose. (3) Adding refrigerant: Once the refrigerant oil is completely drawn into the compressor, the addition of refrigerant oil is complete, and then the refrigerant can be added directly.
1
4
Share

Where to Obtain the Vehicle Inspection Sticker?

Inspection stickers can be applied for at the Vehicle Management Offices of the Municipal or County Public Security Traffic Management Bureaus. Some post offices and banks also offer agency services. Below are the procedures and considerations for applying for a vehicle inspection sticker: 1. For registered motor vehicles, apply for the inspection sticker according to the following periods. (1) Passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years or more, every 6 months. (2) Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years or more, every 6 months. (3) Motorcycles must be inspected once every 2 years within the first 4 years; after 4 years or more, once a year. (4) Special school buses must be inspected every 6 months from the date of registration. (5) Non-special school buses must be inspected every 6 months after obtaining the school bus license plate. (6) Other motor vehicles must be inspected once a year. (7) Small and micro non-commercial passenger vehicles that have been registered for 6 years or more must be inspected once a year; after 15 years or more, every 6 months. 2. Application Conditions (1) The motor vehicle must have reached its inspection validity period. (2) Provide the proof documents required by laws, regulations, and departmental rules. (3) All road traffic safety violations and accidents involving the motor vehicle must be resolved.
8
0
Share

How to Check Mileage on a Mercedes-Benz?

Mercedes-Benz vehicles display the total mileage on the dashboard screen, which can be accessed by using the multifunction buttons on the steering wheel. The method involves first returning to the home page, then selecting the 'Trip' option, scrolling up or down to view instantaneous fuel consumption, average fuel consumption, total mileage, and other details. Navigate to the total mileage to see the reading. Below is some relevant information about car odometers: 1. The car odometer indicates the vehicle's speed in km/h (kilometers per hour). It consists of two meters: a speedometer and an odometer. These are typically located directly in front of the driver's position. Methods to verify mileage include assessing wear and tear or checking the vehicle's maintenance records at a 4S dealership. 2. The odometer records both total mileage and trip mileage (single journey). The trip mileage can be manually reset in the 'Trip' section of the onboard computer. Trip mileage, also known as 'trip distance,' is used to measure the distance between the starting point and destination. It can also help estimate fuel consumption. Total mileage records the cumulative distance the vehicle has traveled since it was manufactured.
16
3
Share

When Should Tires Be Replaced?

Tire replacement should be based on the following five criteria: 1. Check if the wear has reached the marked limit. During the production process, tires are designed with wear indicators. One is located in the tread grooves, spaced at intervals; the other is on the sidewall edge, marked by a small triangle. When the wear reaches these indicators, the tire must be replaced. 2. Replace immediately if the sidewall shows bulges. From the structural diagram, it's clear that tires are not just rubber; their inner layers are more complex than an Oreo. The weakest part is the sidewall. If a bulge appears, it indicates that the internal steel wires have broken or deformed. 3. Nails in the sidewall. The probability of a nail piercing the sidewall is very low unless done intentionally. Whether replacement is needed depends on the nail's location relative to the wear indicator (refer to Figure 1 for the sidewall wear indicator). If the nail is above the wear indicator, a patch can be applied. If it's below, tire replacement is recommended. 4. More than three patches on the tread. Occasional nails can be patched without issues—even three patches might be manageable. However, if there are more than three patches, especially if two are close together, the risk of a blowout increases during high-speed driving due to elevated tire temperatures. 5. Tread aging. Aging treads show fine cracks, which result from prolonged storage or excessive sun exposure. If cracks appear on the tread, replace the tire as soon as possible, and avoid high-speed driving.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.