···
Log in / Register

What are the reasons why the Volkswagen Sagitar cannot start?

3 Answers
SanAlejandro
07/30/25 1:10am
The reasons why the Volkswagen Sagitar cannot start: 1. The battery is dead, causing the inability to start; replacing the battery can solve the issue. 2. Damage to the fuel pump, fuel pump control unit, or relay. 3. Damage to the engine sensor. 4. The engine lacks cylinder pressure, leading to failure to start; overhauling the engine can resolve this. 5. Incorrect gear position. For automatic transmission vehicles, the gear must be in P or N position when starting; if placed in R or D position, the car will not start. The Sagitar is a joint venture sedan brand under FAW-Volkswagen, with body dimensions of 4544mm in length, 1760mm in width, and 1461mm in height, and a wheelbase of 2578mm. In terms of appearance, the front face of the Volkswagen Sagitar adopts the Volkswagen family's large-mouth front design, paired with two newly designed xenon headlights, giving it a striking look from the front. The body lines are quite rounded and full, with arcs smoothly extending from the front bumper to the rear, enhancing its grand car demeanor.
Was this review help?
4
5
Share
StCooper
08/15/25 6:44am
I just encountered a situation last week where my Sagitar wouldn't start, and it turned out to be a battery issue. Actually, the common causes are limited to a few: dead battery being the most common, especially for old batteries over three years; depleted key fob battery causing signal detection failure; starter motor damage resulting in freewheeling sound; fuel pump failure leading to no response when cranking; severe spark plug carbon buildup or ignition coil malfunction; automatic transmission not in P gear can also lock the system. In my case, being able to start after jump-starting confirmed it was battery depletion. I recommend first checking the dashboard light brightness - dim lights indicate battery issues. Always remember to turn off AC and headlights before shutting down the engine, especially in winter when low temperatures particularly drain the battery.
Was this review help?
3
4
Share
Expand All
IanRose
10/20/25 5:37am
A friend who runs a repair shop often receives rescue calls for Sagitars that won't start. According to him, 90% of the cases are due to battery or starter motor failures. Oxidized battery terminals causing poor contact are very common, and can be fixed by removing and sanding them with sandpaper. Fuel system issues like clogged fuel injectors or overdue gasoline filter replacements can also be the culprit, especially for cars that have refueled at small gas stations. A lesser-known cause is a faulty crankshaft position sensor - when this component fails, the ECU doesn't receive the ignition signal. Here's a practical tip: when the key remote's battery is dead, pressing the key against the push-start button can enable emergency ignition.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What Causes Loss of Communication with the Body Control Module?

Loss of communication with the body control module may be due to unreliable battery contact connections or network signal loss. Here is relevant information about the body controller: 1. Functions: Common functions of the body controller include controlling power windows, power mirrors, air conditioning, headlights, turn signals, anti-theft locking systems, central locking, defrosting devices, etc. The body controller can connect with other vehicle ECUs via a bus. 2. Tasks: The primary task of the body controller is to simplify operations, reduce manual operations by occupants, and prevent distraction. The automotive body control system includes safety, comfort control, and information communication systems, mainly used to enhance vehicle safety, comfort, and convenience.
5
4
Share

Does a 220V Car Inverter Damage the Car?

Improper operation of a 220V car inverter can damage the car. Here are some precautions for using an inverter: 1. During use: Strictly follow the instructions in the user manual. 2. Environmental requirements: Do not place the inverter in direct sunlight or near the outlet of a heater. The operating ambient temperature of the inverter should not exceed 40 degrees Celsius. 3. Power requirements: The output power of the car inverter must be greater than the power consumption of the electrical appliance, especially for appliances with high starting power, such as refrigerators and air conditioners, and a larger margin should be left.
11
0
Share

When Should Brake Discs Be Replaced?

Brake discs do not have a definitive replacement interval, as their replacement timing is influenced by the vehicle's operating environment and the driver's habits. Generally, front brake discs should be replaced approximately every 60,000 to 80,000 kilometers, while rear brake discs require replacement around every 100,000 kilometers. Relevant details are as follows: 1. The replacement of brake discs is not determined by usage time or mileage alone; it primarily depends on the driver's habits and the quality of the brake discs themselves, ultimately reflected in the remaining thickness of the brake discs and their radial runout value. 2. Replacing brake discs does not necessarily require replacing the brake pads. If the brake pads still have substantial thickness, they can be retained when replacing the brake discs.
3
2
Share

Which is Better, Drum Brakes or Disc Brakes?

Both have their advantages. Disc brakes have better heat dissipation than drum brakes, preventing brake fade and failure during continuous braking. Drum brakes operate with lower hydraulic pressure, but their diameter increases when heated, which can lead to less responsive braking. More details are as follows: 1. Drum brakes consist of two semi-circular brake shoes inside the wheel hub, using the 'lever principle' to create friction between the shoes and the inner surface of the hub for braking. 2. Disc brakes use a caliper to squeeze two brake pads against a rotor attached to the wheel, generating friction between the pads and the rotor during braking.
8
4
Share

Do cars need to install static strips?

Do cars need to install static strips? Cars need to install static strips, especially during autumn and winter seasons, because the relatively low air humidity prevents static electricity from conducting, causing it to accumulate on the car body. Installing static strips can prevent this situation. Car static electricity is generated by the friction between the car body and dust in a dry environment. When people sit in the car, their clothes inevitably rub against the car's interior, producing static electricity. If the car interior uses more synthetic fiber fabrics, it is even easier to generate static electricity. While driving, encountering static electricity without precaution may cause excessive fright, leading to accidental traffic incidents.
6
1
Share

Do pickup trucks require a lottery for license plates in Beijing?

Pickup trucks do not require a lottery for license plates in Beijing for the following reasons: 1. Pickup trucks are not classified as passenger cars but are categorized as light-duty trucks. 2. In Beijing, pickup trucks are defined as light-duty trucks and require blue license plates. Beijing has the following traffic restrictions for trucks like pickup trucks: 1. Prohibited driving hours: From 6:00 to 23:00 daily, trucks are prohibited from driving within the Fifth Ring Road (excluding the Fifth Ring Road itself). 2. Traffic restrictions: According to the last digit of the license plate, trucks are subject to peak-hour traffic restrictions on weekdays, from 7:00 to 20:00, within the area inside the Fifth Ring Road (excluding the Fifth Ring Road).
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.