What are the reasons why the trunk of the Baojun 730 cannot be closed?

1 Answers
McVanessa
07/29/25 2:52pm
The reasons why the trunk of the Baojun 730 cannot be closed are as follows: Mismatch between the rubber block and the locking mechanism: The closing limit rubber block does not match the locking mechanism properly; Failure of the trunk hydraulic support rod: The trunk structure is very simple, consisting of a motor and a gear reduction mechanism-driven rod that activates the trunk's locking mechanism. Its working principle is the same as that of the central locking system. If the trunk cannot be closed, it is necessary to check whether the trunk lock has been reset. You can use a screwdriver's metal rod to simulate the locking buckle, pressing it horizontally against the lock to see if it can be locked. If it cannot be locked, it indicates that the lock has not been reset.
Was this review help?
14
2
Share
More Forum Discussions

Is the Macchiato a Plug-in Hybrid?

Is the Macchiato a Plug-in Hybrid_58 Auto The Macchiato is a plug-in hybrid. Plug-in Hybrid Electric Vehicle (PHEV): It is a new energy vehicle that falls between pure electric vehicles and fuel-powered vehicles. It has both the traditional car's engine, transmission, drivetrain, fuel system, and fuel tank, as well as the battery, electric motor, and control circuitry of a pure electric vehicle. Additionally, it features a larger battery capacity and a charging port. Advantages and Disadvantages of Plug-in Hybrid Electric Vehicles: Compared to non-plug-in hybrid vehicles, plug-in hybrids have a larger battery capacity, allowing for longer driving ranges. If used primarily for short distances with good charging conditions, a plug-in hybrid can operate without refueling, functioning like a pure electric vehicle and offering the benefits of one. However, plug-in hybrids are more expensive, have a more complex structure, and are heavier, presenting disadvantages compared to purely fuel-powered or pure electric vehicles.
2
1
Share

Why Does the Car Move Without Pressing the Accelerator?

There are two main reasons why a car moves without pressing the accelerator. Manual Transmission: During the idle phase of a manual transmission car, it will move at idle speed even when neither the accelerator nor the brake is pressed. This action is generally referred to as crawling start, and no matter at what speed the brake is released during the start, the vehicle will not stall. Automatic Transmission: Since automatic transmissions do not have a clutch, once the gear is shifted into drive, the car will move even without pressing the accelerator, typically at a speed of around 15 km/h. Therefore, to move at a very slow speed, the brake must be used to reduce the speed. Generally, the larger the engine displacement, the higher the idle speed will be, but it won't be excessively high because the first gear is, after all, a low-speed gear.
4
4
Share

Within how many seconds should a hill start be completed?

A hill start should be completed within 30 seconds. Hill starts require attention to technique. Control the speed properly: When performing a hill start, the speed should be slightly faster before ascending the slope to give the car a bit of momentum; otherwise, it may lack power to climb. Once the rear wheels are on the slope, immediately reduce the speed to allow the car to move slowly. If the speed is too fast, it may be difficult to adjust the car's position relative to the side line in time. Choose the right reference point: To maintain an appropriate distance between the car body and the right side line during a hill start, it is essential to know the position of the right front wheel. Since the driver cannot see the right front wheel from inside the car, a reference point on the car must be used instead.
12
4
Share

Is the Tachometer a Reliable Reference for Hill Starts?

Is the tachometer a reliable reference for hill starts? Using the tachometer as a reference is a practical method for performing hill starts in a car. Overview: Hill starts are part of the on-site driving test in the second subject of the driver's license examination, which involves starting a vehicle parked on a steep slope and moving it upward. Hill starts are one of the test items in the driver's license examination and are included in the on-site driving test of the second subject. Requirements: After the vehicle comes to a stop, if the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line and exceeds 50 centimeters in either direction, it is considered a pass. If the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line but does not exceed 50 centimeters in either direction, 10 points will be deducted.
3
4
Share

What is the diameter of the MG6 OEM brake disc?

The diameter of the MG6 OEM brake disc is 355x32mm. Methods to obtain brake disc dimensions: Brake disc dimensions do not need to be queried. If you want to replace your brake disc, simply remove it and measure the diameter. Brake discs generally require replacement only after a very long mileage, and they should be inspected regularly during maintenance. During use, brake discs may develop some grooves. If there are many deep grooves, the brake disc needs to be replaced. When replacing brake discs, it is important to note that the front and rear brake discs have different sizes, with the front brake discs usually being larger than the rear ones. Location of brake discs: They are located in the center of the tire. Disc-type brake discs can be seen through the gaps in the wheel rim, while drum-type ones require the wheel hub to be removed.
15
2
Share

What is the time limit for hill start?

Hill start time limit is 30 seconds. Hill start is one of the items in the driver's license test. Overview: The motor vehicle driver's license test is an official driving skills examination conducted within the territory of the People's Republic of China to obtain legal permission to drive motor vehicles. Upon passing the test, the applicant will receive a corresponding class license. Others: The Ministry of Public Security of China published the revised "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" on its official website. According to these regulations, the content and passing standards of the driver's license test will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures, including deepening the reform of "simplifying administration, delegating power, improving regulation, and upgrading services" in public security traffic management.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.