What are the reasons why the trunk of Geely Emgrand cannot be closed?

1 Answers
IsabelleLynn
07/30/25 4:54am
Reasons why the trunk of Geely Emgrand cannot be closed: 1. There is a foreign object stuck in the trunk slot; 2. The trunk lock hook is damaged; 3. The spring rod is too stiff; 4. The key is left inside the car. The Geely Emgrand is a compact car with body dimensions of 4632 mm in length, 1789 mm in width, and 1470 mm in height, a wheelbase of 2650 mm, and a fuel tank capacity of 50 liters. The Geely Emgrand is equipped with a 1.5-liter naturally aspirated engine, delivering a maximum horsepower of 109 hp, a maximum power of 80 kW at 6000 rpm, a maximum torque of 142 Nm at 4400 rpm.
Was this review help?
12
0
Share
More Forum Discussions

What is the height of a four-axle vehicle in meters?

The length of a sedan is approximately 4.8 meters, and the width is around 1.8 meters. Different models of sedans may vary in size. Length: Micro cars range from 3 to 4 meters, while small cars are about 4 meters long. The width generally falls between 1.4 and 1.8 meters. Width primarily affects seating space and flexibility. Main advantages: Internationally recognized standards classify cars into A0, A, B, C, D, and E segments based on size. The dimensions for A0, A, B, C, D, and E segment cars are as follows: 1. A0: 3.5-4.0 meters, e.g., Polo. 2. A: 4.0-4.5 meters, e.g., Jetta, Sagitar, Corolla.
20
1
Share

What Causes High Fuel Consumption in the Teana?

The reasons for high fuel consumption in the Teana include abnormal tire pressure or switching to larger-sized tires; prolonged idling without turning off the engine or frequent ignition; aggressive acceleration and frequent braking while driving; driving at high speeds in low gear or low speeds in high gear; fully open windows in summer and using air conditioning during traffic jams; poor route planning, driving on congested roads, and frequent lane changes. The Teana's combined fuel consumption ranges from 5.9-6.7L/100km. Currently, there are 6 models of the Teana available for sale. The combined fuel consumption for the Fashion Edition, Intelligent Navigation Edition, and Comfort Edition is 5.9L/100km. The Intelligent Navigation Edition and Intelligent Edition have a combined fuel consumption of 6.6L/100km. The Intelligent Premium Navigation Edition has a combined fuel consumption of 6.7L/100km. The above figures are based on the NEDC combined fuel consumption, which is measured under the NEDC test procedure. Real-world fuel consumption is higher than these values, ranging from 7.0-9.0L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid sudden, aggressive acceleration, as this can multiply fuel consumption. Gentle acceleration and braking, and early braking: While driving, lightly press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, which improves fuel efficiency. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can improve by up to 20%. Maintain proper tire pressure: Keep tire pressure at the manufacturer-recommended level. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspections: Regular oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even engine misfires). Regularly check and replace dirty air filters, clean or replace fuel injectors, spark plugs, and throttle bodies as per mileage recommendations. Keep windows closed while driving. Open windows increase wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
3
0
Share

Is the First Inspection for a New Car Necessary?

New car first inspection is not necessary. The first inspection of a car is usually done after three months. The first inspection is also known as the first maintenance. The first maintenance items include: 1. Replace the engine oil and oil filter, check the working condition of the braking system, such as the gap and wear of the brake pads and brake discs, tighten the bolts of each system, check and adjust the transmission belt, check and adjust the tire balance and alignment; 2. Check and replenish various oils, check the working condition of components such as lights, battery, shock absorbers, etc. After completing the first maintenance, it indicates that the running-in period of the vehicle has ended, and the vehicle can be driven according to the standard load and normal speed specified by the vehicle.
16
1
Share

How many kilometers should a private car change its oil?

Generally, mineral oil must be changed every 5,000 kilometers, while fully synthetic oil can last up to 10,000 kilometers before needing a change. This refers to the type of oil. Another factor is usage time; typically, oil should be changed every six months. If the car is driven less frequently, the oil change interval can be extended slightly. The functions of engine oil are as follows: 1. Lubrication: The primary role of engine oil is to lubricate the engine's pistons, bearings, and other components, providing protection. 2. Sealing: After the engine is coated with oil, it helps seal during the "power stroke," preventing high-temperature, high-pressure gases in the combustion chamber from leaking into the crankcase through gaps. 3. Heat dissipation: When the engine operates at high speeds, various components generate heat due to friction. This heat is carried away by the circulating oil to the oil cooler and dissipated into the air. 4. Rust prevention: Besides lubrication, engine oil effectively prevents metal parts from rusting and corroding. 5. Cleaning: Impurities and metal wear particles produced during engine operation are filtered out by the oil filter, keeping the lubrication system clean.
13
1
Share

What is the function of the button on the handbrake?

The handbrake, commonly known as the parking brake, is professionally referred to as an auxiliary brake. Unlike the principle of the main brake, it uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. As for the button on the handbrake, it is used to engage the handbrake, transmitting the pulling force through the steel cable to the rear brake drum or rear caliper, achieving the braking effect. More relevant information is as follows: 1. Function: The role of the handbrake is to tighten the brake shoes against the brake drum or disc after the vehicle has stopped, keeping the vehicle in a braked state to prevent dangerous movement. However, during high-speed driving, the braking force of the handbrake is minimal. If the driver pulls the handbrake while driving at high speed, it can easily cause the rear wheels to lock up, the cable to snap, and lead to vehicle skidding or even rollover. 2. Introduction: The professional term for the handbrake is auxiliary brake, which differs from the main brake in principle. It uses a steel cable connected to the rear brake shoes to apply braking force. The handbrake is a frequently used system, and proper usage ensures smoother operation in the future, especially for widely used mechanical handbrakes. It is best to follow the correct method of use.
19
3
Share

How to Turn Off the Start-Stop Function in Audi Q3?

Audi Q3 start-stop setting method: 1. Use the one-touch key to start the vehicle engine with one press; 2. Check the instrument panel to ensure there are no fault indicators; 3. Locate the engine start-stop button below the center control panel; 4. After finding the button, press the switch, and the screen will display the engine start-stop indicator, usually an arc-shaped arrow with an 'A' inside; 5. Once activated, when the brake is pressed and the vehicle is stationary, the engine will stop working. Upon releasing the brake, the engine will restart. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, with body dimensions of 4385mm, 1831mm, and 1608mm, a wheelbase of 2603mm, a fuel tank capacity of 64 liters, and a top speed of 232km/h.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.