What are the reasons why the Trumpchi GS4 has power but won't start?

1 Answers
StMariana
07/30/25 1:44am
Trumpchi GS4 has power but won't start for the following reasons: Fuel system failure: Mainly caused by fuel switch (no fuel delivery), fuel filter (clogged), carburetor (no fuel delivery or over-rich mixture), or bent fuel pipe. Electrical circuit failure: Short circuit in vehicle electrical components (e.g., ignition switch, ignition coil, igniter, and magneto failure), or open circuit caused by loose wiring harness connectors. Air pressure failure: Insufficient cylinder compression, improper air filter element intake resistance, engine intake/exhaust system failure, etc. Wiring failure: Some wiring issues in the motorcycle can also cause the vehicle to fail to start. First, check if it's a wiring problem, looking for short circuits or loose connections. If it's due to wiring issues, friends with some repair knowledge can easily fix it, avoiding the cost of going to a repair shop.
Was this review help?
15
3
Share
More Forum Discussions

How to Open the Hood of a Changan Ford Focus?

To open the hood of a Changan Ford Focus, follow these two main steps: Step 1: Pull the hood release lever located on the left side of the driver's compartment upward. Step 2: Proceed to lift the front hood. Functions of the hood: 1. Airflow guidance. The presence of a car hood first demonstrates the vehicle's overall integrity, while also serving to guide airflow. During high-speed operation, the vehicle generates air resistance. The hood channels this resistance, reducing its impact on the car and thereby improving fuel efficiency. 2. Protection for the engine and surrounding pipeline components. Beneath the car hood lie critical components including the engine, electrical circuits, fuel system, braking system, and transmission system. The engine hood effectively shields against adverse effects such as impacts, corrosion, rainwater, and electrical interference, ensuring the vehicle's proper operation.
11
0
Share

When does Buick engine oil life need to be replaced?

Buick engine oil needs to be replaced when its remaining life is below 0.1. The oil life reminder is calculated by the vehicle's computer system based on various factors including usage time, mileage, engine speed, etc. When the remaining oil life drops to around 0.1, the vehicle's instrument cluster will display a prompt for immediate oil change. Additional information about engine oil is as follows: Functions: Engine oil, also known as engine lubricant, serves multiple purposes including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the "blood" of automobiles. Classification: Engine oils are categorized into three types based on their origin: conventional mineral oil, synthetic oil, and nano-ceramic oil. Synthetic oils offer superior lubricity, lower friction resistance, better oxidation resistance, and stronger cleaning performance compared to mineral oils. Their disadvantages include slightly poorer low-temperature fluidity and heat resistance than mineral oils.
16
0
Share

What is the Buick Envision 20T?

Buick Envision 20T is the Buick Envision. The following is information about the Buick Envision's configuration and powertrain: Buick Envision's Configuration: The Buick Envision comes standard with ABS anti-lock braking, brake assist, electronic stability control, multifunction steering wheel, power sunroof, daytime running lights, in-cabin PM2.5 filtration system, automatic parking assist, and other features. Buick Envision's Powertrain: The Buick Envision is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169Ps, maximum power of 124kW, and maximum torque of 250N·m, paired with a 7-speed dual-clutch transmission. Additionally, the engine in the 2021 Envision 532T Front-Wheel Drive Leading Edition uses 92-octane gasoline and is a 4-cylinder engine.
19
4
Share

How to use the cruise control on the 2015 Sagitar?

The method to use the cruise control on the 2015 Sagitar is: 1. Press the power button to turn on the system, at which point the cruise control indicator light on the instrument panel will illuminate; 2. Accelerate to the desired speed, press the set button, and release the accelerator; 3. You can fine-tune the speed by pressing res+ and res-. The 2015 Sagitar is a compact car with the following dimensions: length 4655mm, width 1780mm, height 1453mm, wheelbase 2651mm, fuel tank capacity 55L, and curb weight 1300kg. The 2015 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.6L naturally aspirated engine producing a maximum horsepower of 110PS (81kW) and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
12
4
Share

What is the top speed of the Piaggio X7?

The top speed of the Piaggio X7 is 136 km/h. The top speed refers to the maximum driving speed that a vehicle can achieve on a well-paved road, which is the speed at which the driving resistance and driving force are balanced under windless conditions on a flat surface. The Piaggio X7 is a model under Zongshen Motor, equipped with a single-cylinder, water-cooled, four-stroke, four-valve engine with a displacement of 244 ml, a maximum power of 21 kW, and a maximum torque of 15.6 Nm. It has a fuel tank capacity of 12.1 liters. The dimensions of the Piaggio X7 are 2060 mm in length, 745 mm in width, and 1325 mm in height, with a wheelbase of 1480 mm, a seat height of 760 mm, and a curb weight of 182 kg. The front tire specification is 120/70-14, and the rear tire specification is 140/60-13.
12
0
Share

How many cylinders does the Volvo XC60 engine have?

Volvo XC60 engine is a four-cylinder. The Volvo XC60 uses the following two engines: The first one: a low-power version of the 2.0-liter turbocharged engine. The 2.0-liter turbocharged engine has a maximum power of 190 horsepower and a maximum torque of 300 Nm. This engine can output its maximum torque starting from 1400 rpm and can maintain it up to 4000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). The second one: a high-power version of the 2.0-liter turbocharged engine. The 2.0-liter turbocharged engine has a maximum power of 254 horsepower and a maximum torque of 350 Nm. This engine can output its maximum torque starting from 1500 rpm and can maintain it up to 4800 rpm. It is also paired with an 8-speed automatic transmission (8AT).
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.