What are the reasons why the Tiguan suddenly won't start?

What does the Mazda one-touch window function mean?

Mazda's one-touch window control button is located on the driver's door armrest. The activation methods are detailed below: 1. Opening the window (one-touch down) (1) Press the switch to the first position and hold until the window moves to the desired position. (2) Press slightly harder to the second position, and the window will automatically lower. 2. Closing the window (one-touch up) (1) Lift the button to the first position (excessive force will reach the second position), and release once the window reaches the desired position. (2) Briefly pull the switch to the second position to automatically close the window.

9

5

Share

What are the reasons for engine acceleration difficulties and abnormal noises?

Engine acceleration difficulties and abnormal noises are caused by: 1. Engine misfire or knocking; 2. Dirty or poor-quality engine oil; 3. Loose connecting rod bearings and crankshaft bearings, melted bearing shells, or improper dimensions during rotation. The function of an engine is: to convert the thermal energy of gasoline into mechanical energy by expanding gas through combustion in a sealed cylinder to push the piston and perform work, thereby providing power for the vehicle. Engines can be used as power generation devices or refer to the entire machine including the power unit (such as gasoline engines, aircraft engines). Their types include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.

1

5

Share

What is the cause of the Cruze code89 fault?

When the Chevrolet Cruze dashboard displays code89, it indicates a fault with the engine oil pressure sensor in the Cruze. Below are the specific details about the oil pressure sensor: 1. Function: The oil pressure sensor in a vehicle is a crucial device for monitoring the engine's oil pressure. The data it detects helps ensure the engine operates normally. 2. Working Principle: The amplified pressure signal is transmitted via a signal wire to the oil pressure gauge, altering the current ratio between the two coils inside the gauge to indicate the engine's oil pressure. The pressure signal, after voltage and current amplification, is also compared with a preset alarm voltage in the alarm circuit. If the signal falls below the alarm voltage, the alarm circuit outputs an alarm signal, which then illuminates the warning light via the alarm wire.

19

3

Share

Why is the drained engine oil black?

Why is the drained engine oil black? The reason is that the oil change interval is too long. Engine oil primarily lubricates various components inside the engine, especially playing a crucial role in lubricating pistons and cylinder walls. The combustion byproducts in this process form dark-colored viscous substances. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The main functions of engine oil are to reduce friction and wear on moving parts, remove sludge (one function of dispersants) and varnish (function of detergents) from the engine, neutralize acids produced by fuel combustion and lubricant oxidation (function of detergents), improve piston ring sealing, and cool the engine by carrying away heat from moving components.

9

0

Share

How to Open the Front Hood of a Bora?

To open the front hood of a Bora, follow these steps: 1. Locate the hood release lever near the driver's left foot area and pull it backward. 2. Move to the front of the car, reach under the center of the hood, and push the latch to the right to release and open the hood. The Bora measures 4663 mm in length, 1815 mm in width, and 1462 mm in height, with a wheelbase of 2688 mm. It has a fuel tank capacity of 50 liters and a trunk capacity of 506 liters, with a curb weight of 1320 kg. This model is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power output of 85 kW, paired with a 7-speed dual-clutch transmission.

5

4

Share

Parking (P) or Neutral (N) for Warming Up the Car?

There are different scenarios for warming up the car in Parking (P) or Neutral (N) gear. If you plan to reverse first, warm up the car in P gear. If you intend to drive forward directly, warm up the car in N gear. Starting the engine in N gear avoids the impact on the transmission caused by P gear unlocking, because starting in P gear requires passing through R (Reverse) gear, while N gear directly shifts to D (Drive) for takeoff. Thus, the unlocking of P gear's locking mechanism is the first impact on the transmission, and shifting to R gear is the second impact, whereas N gear allows direct transition to D gear. Automatic transmission typically refers to the car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment and gear-shifting operations.

10

4

Share

What are the reasons why the Tiguan suddenly won't start?

What does the Mazda one-touch window function mean?

What are the reasons for engine acceleration difficulties and abnormal noises?

What is the cause of the Cruze code89 fault?

Why is the drained engine oil black?

How to Open the Front Hood of a Bora?

Parking (P) or Neutral (N) for Warming Up the Car?

What is the Honda Elysion?

How to Open the Hood of a Mondeo?

What is the difference between an air filter and an air conditioning filter?

Can a Nail in the Sidewall of a Tire Be Repaired?