What are the reasons why the Sail AMT cannot engage gear?

1 Answers
LaAlex
07/29/25 11:48pm
The reasons why the Sail AMT cannot engage gear: 1. Caused by transmission solenoid valve failure; 2. Brake clutch pressure leakage; 3. Mechanical failure occurs; 4. Sensor and ECU problems. The Sail is a compact car produced by SAIC-GM Chevrolet, with body dimensions of: length 4249 mm, width 1690 mm, height 1503 mm, wheelbase of 2465 mm, ground clearance of 119 mm, and fuel tank capacity of 42 liters. The Sail is equipped with a 1.2L inline 4-cylinder naturally aspirated engine, with a maximum horsepower of 87 hp, maximum power of 64 kW, and maximum power speed of 6000 rpm.
Was this review help?
10
5
Share
More Forum Discussions

How to turn on the high beam of Honda Vezel?

The horizontal lever on the left side of the steering wheel, which controls the turn signals, can be twisted at its front end. It has two positions: twisting it once turns on the parking lights, and twisting it again turns on the low beams. When the low beams are on, pushing the lever upwards activates the high beams. Related information is as follows: 1. Avoid using when possible: It's generally best not to use high beams when driving in the city because urban areas usually have good lighting conditions. The high angle of the high beams can easily dazzle oncoming drivers and pedestrians, affecting their vision and creating unsafe conditions. It is also considered impolite driving behavior. 2. Nighttime driving: Alternately turning the high beams on and off at night can serve as a substitute for honking to alert nearby pedestrians and vehicles, avoiding excessive noise. On highways or in rural areas without streetlights, using high beams can expand your field of vision. However, when encountering oncoming traffic, it is advisable to switch to low beams for safety and courtesy.
4
1
Share

What are the types of 1.0L displacement cars?

1.0L naturally aspirated engine cars are mostly microcars with a wheelbase between 2 meters and 2.3 meters, and a body length within 3.65 meters. The main models include: Geely Automobile-Panda, Changan Suzuki-Alto, Changan Automobile-Benben MINI, BYD Automobile-BYD F0, Chery Automobile-Chery QQ. Geely Automobile-Panda: The 1.3L displacement engine provides more than sufficient power for this car weighing less than 1 ton. In actual driving, the Geely Panda starts lightly, with a moderately weighted clutch pedal and a relatively smooth 5-speed manual transmission, showing good power from the start. Changan Suzuki-Alto: The Changan Suzuki Alto is equipped with a 1.0L naturally aspirated engine across all models, paired with a 5-speed manual or 4-speed automatic transmission. Changan Automobile-Benben MINI: Equipped with an E-Power series naturally aspirated engine with a displacement of 1243ml. BYD Automobile-BYD F0: The BYD371QA high-performance eco-friendly engine has a displacement of 1.0L, meets the National IV emission standards, and has a fuel consumption of only 4.2L per 100 kilometers. Chery Automobile-Chery QQ: Features a high-performance multi-point fuel injection engine with a top speed of no less than 140km/h.
2
1
Share

How to reset the tire pressure light on a Sagitar?

The method to reset the tire pressure light on a Sagitar: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. After hearing a "beep" sound, release the button. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Tire pressure monitoring automatically and continuously checks the tire pressure while the car is in motion, alerting the driver to any leaks or low pressure to ensure driving safety. There are three commonly used methods of tire pressure monitoring: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is sent from inside the tire to a central receiver module via a wireless transmitter, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotation speed between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also equipped. Compared to using only direct systems, this hybrid system can reduce costs and overcome the indirect system's inability to detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system does.
7
5
Share

What are the features of the 2021 Leiling Sport Edition?

2021 Leiling button functions: Electronic Stability Control (ESC): The system is enabled by default and it is not recommended to turn it off unless on slippery roads such as during rain or snow. Parking Radar/Image: This button activates the panoramic view and radar function, helping the driver detect surrounding obstacles through alerts and visual feedback. Auto Hold: Reduces foot fatigue at traffic lights by automatically locking the wheels with the brake calipers. Pressing the accelerator pedal unlocks the wheels, allowing the car to move forward again. Auto Start-Stop: When activated, the engine temporarily shuts off. Releasing the brake pedal allows the vehicle to move forward again.
12
2
Share

What car does Burning Gyroscope drive?

TikTok's Burning Gyroscope drives a car from Audi, but due to the limited footage and the minimal differences in Audi's interiors, the specific model remains unclear. About Audi: 1. Brand Introduction: Audi is a luxury brand under Volkswagen Group, with its production base in Germany. 2. Current Models: (1) FAW-Volkswagen Audi: Audi A3, Audi A4.L, Audi A6L, Audi Q2L, Audi Q3, Audi Q5L, etc. (2) Audi Sport: Audi RS3, Audi RS4, Audi RS5, Audi RS6, Audi RS7, etc. (3) Audi (Imported): A3, S3, etc.
19
2
Share

How to Turn on the Air Conditioning in a Baojun 730?

730 Baojun air conditioning can be turned on as follows: 1. If you want the air conditioning to provide cooling, press the A/C cooling button in the car and then rotate the temperature adjustment knob to the cooling zone. 2. If you want warm air, turn off the air conditioning cooling system and rotate the knob to the warm air zone. Here is some information about the Baojun 730: 1. The Baojun 730 is a family MPV product under SAIC-GM-Wuling Baojun. 2. The overall design of the Baojun 730 adopts a style similar to the Baojun 630, featuring a seven-seat layout with a maximum cargo space of 1680L.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.