What are the reasons why the Roewe RX3's one-button start fails to ignite?

Should You Shift to N or Keep in D at Traffic Lights for Automatic Transmission?

When waiting at a red light with an automatic transmission, simply press the brake pedal with your foot and remain in D gear. Below is an introduction to the gears of an automatic transmission car: P gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the shift lever to engage P gear. R gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal, press the unlock button at the front of the shift lever, engage R gear, and after releasing the brake pedal, slowly press the accelerator to move the vehicle backward. N gear: Neutral gear. You can directly shift from R or D gear to N gear. When shifting out of N gear, you need to press the brake pedal. D gear: Drive gear. You can directly shift from N gear to D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift up or down based on engine load and speed.

16

4

Share

How many kilometers can the BYD Tang run?

400-520 kilometers is the range of the BYD Tang New Energy vehicle. The BYD Tang New Energy vehicle offers high cost performance. In terms of configuration, it already includes features that are typically found in high-end vehicles. Especially in terms of fuel consumption, although it is somewhat high overall, it is still a new energy vehicle. The all-new generation Tang integrates the Dragon Face design concept, SEA large luxury chassis platform technology, DiLink intelligent connectivity system, D++ open ecosystem, third-generation dual-mode technology, ADAS intelligent driving assistance system, and other differentiated product values. The all-new generation BYD Tang fuel version is built based on the latest Dragon Face design language, showing significant changes compared to the previous generation, primarily influenced by the ideas brought by former Audi design director Wolfgang Egger. The signature large-mouth grille is paired with LED headlights on both sides. The vehicle dimensions are length/width/height (mm) 4870x1940x1720, wheelbase (mm) 2820, front track (mm) 1650, and rear track (mm) 1630.

20

1

Share

Can a motorcycle be registered without proper documentation?

No, it cannot. Below are the required procedures for motorcycle registration: Verification: After purchasing the motorcycle, bring the invoice issued by the dealer to the Motor Vehicle Market Management Office under the Municipal Administration for Industry and Commerce to complete the verification process and obtain a verification stamp. For imported motorcycles, additional documents such as the customs goods import certificate or confiscation certificate, commodity inspection certificate, and related license plate application procedures provided by the dealer must be submitted. Temporary Movement Permit: If the owner can ensure that the registration procedures are completed within seven days of purchasing the new motorcycle, a temporary movement permit is not required. If the motorcycle remains unregistered for more than seven days, the owner must apply for a temporary movement permit from the local traffic police department. Vehicle Inspection: Similar to a pre-employment medical check-up for new employees, a new motorcycle must pass an inspection before receiving its license plate. After passing the inspection, the on-site police officer will fill out and sign the motor vehicle registration form. Required documents for the inspection include the owner's ID card, import documents (if applicable), and the inspection approval form issued by the vehicle management office.

7

2

Share

Why can't my ID card be scanned for the driver's license test?

If your ID card cannot be scanned for the driver's license test, it is likely due to damage to the internal chip, which prevents the stored information from being correctly read by the card reader. The card cannot be re-magnetized or repaired, and you must apply for a new ID card at the local police station. Additionally, without being able to read your identity information, you cannot register for the driver's license test. Below are some important considerations for taking the driver's license test: Do not forget to release the handbrake when starting the car: As a beginner, always follow the correct sequence when starting the car. Regardless of whether the handbrake was engaged when the car was parked, make sure to release it before starting. Always wear your seatbelt: Good habits start with wearing a seatbelt. It is advisable for learners to develop the habit of buckling up as soon as they get into the car. Do not forget to engage the handbrake when parking: Neglecting this can lead to the dangerous situation of the car rolling away, potentially causing damage to your vehicle and even harm to others' property or lives. Though the mistake may seem minor, the consequences can be severe.

10

2

Share

What Happens When the Car Fan Control Module Fails?

When the car fan control module fails, the fan will not rotate, and the power cabinet may overheat. Below is an introduction to car fans: 1. Introduction: The car radiator is a key component in the car's cooling system. 2. Function: Its purpose is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, achieving temperature regulation. It is also an essential part of the car engine. 3. Precautions: Always check the water level during daily use. Add water only after the engine has cooled down. When adding water, slowly open the radiator cap, and keep your body as far away as possible from the filler neck to avoid burns from high-pressure steam or hot coolant that may spray out.

18

4

Share

Where is the Tiguan fan control module located?

Tiguan fan control module is located at the R-frame and integrated with the electric fan: The electric fan control module is the control unit that regulates the operation of the electric fan. If the electric fan operates poorly or fails to operate, you can inspect the control module: 1. Visual inspection: Check the coil at the fan motor vent for any signs of burning. If there are burn marks, it indicates that the fan motor coil is burnt and cannot be used anymore. 2. Olfactory inspection: Check if there is any smell of burnt coil, melted plastic, or short-circuited wires. If there is a burnt smell, you can only replace the fan motor, new connecting wires, capacitors, etc. 3. Manual inspection: Rotate the shaft by hand to check its operation. If it rotates with difficulty or is not smooth, it indicates that the internal bearing is lacking oil or the rotor is rubbing. If rubbing occurs, while adding oil and cleaning, you also need to replace the bearings on both sides to eliminate the rubbing phenomenon. Feel the surface temperature with your hand; if the temperature rises too quickly or too high, it indicates a short circuit in the fan motor, and the fan motor needs to be replaced.

9

2

Share

What are the reasons why the Roewe RX3's one-button start fails to ignite?

Should You Shift to N or Keep in D at Traffic Lights for Automatic Transmission?

How many kilometers can the BYD Tang run?

Can a motorcycle be registered without proper documentation?

Why can't my ID card be scanned for the driver's license test?

What Happens When the Car Fan Control Module Fails?

Where is the Tiguan fan control module located?

What Causes the Abnormal Noise When Starting with Auto Hold?

Is it a problem to drive 500 kilometers a day in a new car?

Is the Electronic Handbrake Necessary When in N Gear at a Red Light?

Is it harmful to accidentally shift into M gear in a new automatic transmission car?