What are the reasons why the remote start of the LaCrosse is not working?

1 Answers
JustinDella
07/29/25 7:11pm
The remote start of the LaCrosse may not work if the car door is not properly closed, or it could be due to an engine malfunction. Below is an introduction to remote start for cars: 1. Concept and Principle: Remote start of the engine or motor refers to starting the engine or motor remotely using a key fob. The principle involves the vehicle receiving a signal from the remote key to start the engine or motor. 2. Models with Remote Start: Most models equipped with this feature are from the General Motors brand, such as the Buick LaCrosse, Honda Civic, Honda Passport, and Cadillac CT6, among others. Since remote start involves the engine's anti-theft security lock, retrofitting it later is quite challenging. Even if installed by modifying the circuit, there could be potential safety risks.
Was this review help?
9
2
Share
More Forum Discussions

Where is the thermostat located in the Audi A4 1.8T?

The thermostat of the Audi A4 1.8T is located in a connecting valve between the radiator and the engine water inlet. It can be seen next to the water pump after removing the timing belt. Thermostat: The thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature, changing the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. Audi A4: The new Audi A4 has undergone significant improvements in handling, incorporating the latest dynamic suspension design and components from the Audi S4 and the new Audi A6L. It has also been calibrated for domestic road conditions, achieving a new level of sports performance, precise and smooth handling, and driving comfort.
2
0
Share

What is the optimal tire pressure for sedans?

The optimal tire pressure for sedans is 2.4bar, with the standard range being 2.4 to 2.8bar. In winter, it should be increased by 0.2bar, and in summer, decreased by 0.1bar to prevent tire blowouts. The hazards of excessive tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Decreased puncture resistance, increasing the risk of blowouts; 3. Accelerated wear on the central tread pattern, shortening tire lifespan and affecting other components; 4. Excessive stretching of tire cords, reducing elasticity and increasing the load on the vehicle during driving, further decreasing puncture resistance; 5. Increased susceptibility to punctures from nails, glass, and other sharp objects, leading to internal cracks and blowouts upon impact.
6
5
Share

What is the reason for the Mercedes-Benz C200 not accelerating when the throttle is fully pressed?

Mercedes-Benz C200 not accelerating when the throttle is fully pressed may be due to the transmission entering cold protection mode, where the computer controls the gear and prevents it from shifting up. Try warming up the car before driving again. Alternatively, the speed limit mode might be activated. Locate the speed limit lever and push it forward to deactivate the speed limit function. Mercedes Speed Limit Function: The 'lim' indicator on a Mercedes represents the speed limit function. When this function is activated, the vehicle's maximum speed is capped at the preset limit, and even if the throttle is pressed further, the car's speed will not increase. Mercedes-Benz C-Class: The new C-Class sedan is equipped with active safety systems, intelligent lighting systems, preventive safety systems, passenger safety protection systems, and rescue tools, offering features such as comfort, refinement, practicality, and safety.
20
0
Share

How to Steer the Wheel When First Learning to Drive?

For beginners, the specific method to steer the wheel is as follows: Hold the left hand at the 9 o'clock position and the right hand at the 3-4 o'clock position. The thumbs should grip the inner side of the steering wheel, while the other four fingers wrap around the outer side. Below is an introduction to steering techniques: 1. Left Turn: When the vehicle needs to turn left, first activate the left turn signal. Use the left hand to steer the wheel to the left, with the right hand assisting in pushing left. After the turn, use the right hand to steer the wheel back to the right to align the direction straight ahead. 2. Right Turn: When the vehicle needs to turn right, first activate the right turn signal. Use the right hand to steer the wheel to the right, with the left hand assisting in pushing right. After the turn, use the left hand to steer the wheel back to align the direction straight ahead. 3. U-Turn: There are two scenarios for U-turns. First, if there is ample space ahead, you can 'take a wide turn,' keeping a slightly greater distance from the inner side to avoid scraping accidents. 4. Continuous Curves: The key to navigating continuous curves is to reduce speed. Before entering the curve, you can lean slightly to the right. If turning right, lean slightly to the left. The exact number of wheel turns depends on the actual situation. 5. Reversing: Before reversing, observe the surroundings carefully and decide whether the rear of the car should go left or right. Steering left will make the rear go left, and steering right will make the rear go right. The amount of steering should be adjusted by using reference points in the rearview mirror.
12
2
Share

Why doesn't the Volkswagen cabin light turn off?

The light on the cabin ceiling won't turn off, possibly because the constant-on mode is activated. Introduction to buttons near the cabin ceiling light: There are usually buttons next to the cabin ceiling light with three modes: ON (constant-on mode), DOOR (lights on when door opens/off when closed), and OFF (off mode). Normally set to DOOR mode, the light automatically turns on when opening doors and off when closing. If set to ON, the light remains constantly on and requires manual shutoff. Abnormal interior lighting: If interior lights stay on abnormally, check the light switch, doors, and lights themselves. Since interior lights are frequently used, most cabin lighting systems rarely develop issues.
17
4
Share

Will the timing belt breakage of Chery Fulwin 2 cause valve collision?

Chery Fulwin 2 will experience valve collision when the timing belt breaks. Timing belt: As a crucial component of the engine valve train system, it connects with the crankshaft and maintains accurate intake/exhaust timing through specific gear ratios. Belts are used instead of gears for transmission due to their lower noise, minimal dimensional variation, and easier compensation. Obviously, belts have shorter lifespans than metal gears, thus requiring periodic replacement. Valve collision: When the piston reaches top dead center in engine design, the upper space becomes extremely limited to achieve proper compression ratio. If valves remain open at this position, they will collide with the piston.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.