What are the reasons why the Peugeot 408 has power but cannot start?

Is the 10th-generation Civic equipped with a large or small CVT?

The 10th-generation Civic is equipped with a small CVT. Below is relevant information about the Civic: 1. Exterior: The Dongfeng Honda Civic features a stylish and sophisticated design with smooth body lines. Its hatchback appearance has undergone significant changes compared to previous models. 2. Interior: The Dongfeng Honda Civic boasts relatively refined interior craftsmanship and a fashionable design with prominent layering. It offers abundant functional configurations, though the extensive use of hard plastics results in subpar tactile feedback. The seats provide good comfort. 3. Space: The Civic performs well in terms of space, with ample legroom in both front and rear seats. The front seats offer generous headroom, while the rear seats have somewhat limited headroom. The central floor hump in the rear is not very pronounced, enhancing practicality. The storage compartments are quite functional, and the trunk space has been improved compared to older models.

13

5

Share

Is the Audi A4L equipped with a CVT transmission?

Audi A4L is equipped with a 7-speed Multitronic automatic transmission. Advantages of CVT transmission: 1. Excellent fuel economy: CVT can achieve continuously variable transmission over a wide range, obtaining the best match between the transmission system and engine conditions. By continuously adjusting the transmission speed to suit various vehicle speeds, the engine can operate at optimal conditions for extended periods, thereby improving combustion efficiency and fuel economy. 2. Superior power performance: CVT can achieve closed-loop control with the engine, fully utilizing the engine's maximum torque. Its torque-increasing performance is significantly better than MT and AT, making it ideal for SUV models that emphasize torque. The acceleration performance (0-100km/h) of CVT-equipped vehicles is 7.5%-11.5% better than AT vehicles, and high-speed acceleration is superior to MT vehicles. CVT's characteristics make its power performance significantly better than manual transmissions (MT) and automatic transmissions (AT). 3. Enhanced comfort: CVT improves driving comfort. With no gear shifts, the transmission process is smooth and linear, eliminating shift shocks during acceleration. There is no downshift jerking during rapid acceleration, and the CVT system offers a wide transmission ratio range (typically 2.400-0.395), resulting in low engine RPM and reduced noise at high speeds, providing a quiet and comfortable driving experience. 4. Improved handling: When paired with a torque converter, the CVT transmission can amplify engine torque, ensuring quick starts and smoother acceleration. During overtaking, pressing the accelerator deeply does not result in the downshift sensation of AT but instead adjusts the ratio to amplify torque. During high-speed cornering, releasing the accelerator does not cause upshifting like AT, maintaining torque for exiting the corner at high speed. CVT offers better engine braking than AT. It can automatically detect slopes—increasing torque output uphill and enhancing engine braking torque downhill to reduce coasting speed on long descents, improving safety and handling.

6

3

Share

Will a faulty high-pressure fuel pump increase fuel consumption?

No, it will not increase fuel consumption. The fuel pump only provides fuel pressure and does not affect fuel consumption, but if it is damaged, it will affect the vehicle's operation. The function of the fuel pump is to draw gasoline from the fuel tank and press it through the pipeline and fuel filter into the float chamber of the carburetor. More information about the high-pressure fuel pump is as follows: 1. High-pressure fuel pump: It is the interface between the high-pressure fuel circuit and the low-pressure fuel circuit. Its function is to generate fuel pressure in the common rail by controlling the fuel output. In all cases, it is mainly responsible for providing sufficient high-pressure fuel to the common rail. 2. Function: The specific function of the high-pressure fuel pump is to increase fuel pressure for high-pressure injection, achieving better atomization effects. The main uses of the high-pressure fuel pump are as a power source for hydraulic devices such as jacks, headers, cotton gins, and extruders.

12

2

Share

Driving at 150 in a 100 speed limit zone is how many percent over the speed limit?

Driving at 150 in a 100 speed limit zone is 50% over the speed limit. Different ranges of speeding within various speed limits will result in different fines and penalty points. Here is relevant information about speeding penalties: 1. On regular highways, if you exceed the speed limit by less than 10%, it will result in a warning. Although such speeding does not incur penalty points or fines, you may still receive a ticket, which is classified as a "0 points, 0 fine" warning citation. 2. If your speed exceeds the limit by 15% but is less than 20%, you will be penalized with 3 points. 3. If the speeding is between 20% and 50%, the penalty may be 6 points.

8

2

Share

Will I be fined for driving 120 in an 80 km/h construction zone on the highway?

The penalty standard for driving 120 in an 80 km/h highway construction zone is 12 demerit points, and the driver's license may also be revoked. The demerit point standards for speeding on highways are as follows: 1. Within 10%: No penalty for speeding within 10% of the limit. 2. 10% to under 20%: 3 demerit points for speeding 10% to under 20% above the limit. 3. 20% to under 30%: 6 demerit points for speeding 20% to under 30% above the limit. 4. 30% to under 50%: 6 demerit points for speeding 30% to under 50% above the limit. 5. 50% to under 70%: 12 demerit points for speeding 50% to under 70% above the limit, and the driver's license may also be revoked. 6. 70% and above: 12 demerit points for speeding 70% or more above the limit, and the driver's license may also be revoked.

2

3

Share

What does the M gear in Corolla mean?

Corolla M gear is the manual mode of the automatic transmission model. There will also be a plus and minus sign next to it, which is used to shift gears by pushing the gear lever forward or backward or using the steering wheel paddle shifters. "M+" and "M-" are for upshifting and downshifting, and the number of gears depends on the type of the automatic transmission. When the car can use the M gear: when overtaking, when going up or down a slope, when driving on high-speed sections, and when driving on icy or snowy roads. When overtaking, the car can use the M- gear to lower the gear, which can provide high torque, allowing the car's speed to increase rapidly in a short time. When going uphill, the car should use M-, as the lower gear provides stronger engine power. When going downhill, you can use M+ to adjust the gear to 2-3, using the engine's braking effect to slow the vehicle, reducing reliance on the brakes and increasing driving safety. Additionally, using the M gear when going down steep slopes helps control speed with the engine, preventing brake overheating and thermal fade. When driving on highways, you can manually use M+ to increase the gear, maintaining a speed of 80-100km/h, which results in better fuel economy. When driving on icy or snowy roads, adjusting the gear to 2 using M+ can reduce wheel slipping.

5

3

Share

What are the reasons why the Peugeot 408 has power but cannot start?

Is the 10th-generation Civic equipped with a large or small CVT?

Is the Audi A4L equipped with a CVT transmission?

Will a faulty high-pressure fuel pump increase fuel consumption?

Driving at 150 in a 100 speed limit zone is how many percent over the speed limit?

Will I be fined for driving 120 in an 80 km/h construction zone on the highway?

What does the M gear in Corolla mean?

What is gear shifting called?

How long does it take to pick up an Audi A4L?

What type of batteries are used in new energy vehicles?

Is it necessary to change the oil when the system prompts?