What are the reasons why the Peugeot 408 has power but cannot start?

1 Answers
StKingston
07/29/25 11:16am
Peugeot 408 has power but cannot start for the following reasons: 1. Insufficient fuel: The vehicle's fuel level is insufficient, and the actual remaining fuel can be confirmed by the fuel gauge needle. If the fuel gauge shows below the red line, the car naturally won't start. 2. Incorrect gear position: For automatic transmission vehicles, the gear must be in P or N position when starting. If it is in R or D position, the car won't start. Some manual transmission vehicles also won't start if the clutch is not depressed. 3. Steering wheel lock: If the steering wheel is not straightened to a certain angle when parking and turning off the engine, the steering wheel will automatically lock. When trying to start again, the key cannot be turned, and naturally, the car won't start. 4. Other reasons: A clogged fuel filter, blocked fuel pump screen, severely carbon-fouled spark plugs, or a faulty starter motor can all prevent the car from starting normally. It is necessary to promptly visit a repair shop for detailed inspection and maintenance.
Was this review help?
13
0
Share
More Forum Discussions

Where is the car coolant filling location?

Car coolant filling location is at the filler opening of the small reservoir under the front hood. Steps to add car coolant: 1. Open the driver's door; 2. Pull the front hood release, slowly unscrew the small reservoir cap under the hood to release internal high-pressure gas; 3. Refill coolant into the small reservoir under the hood up to the MAX mark. Function of car coolant: Circulates in the engine cooling system to provide antifreeze, anti-boil, anti-rust, and anti-corrosion effects, carrying away excess heat generated during engine operation to maintain normal working temperature.
18
0
Share

How to Turn on the High Beam on a Chevrolet Cavalier?

To turn on the high beam on a Chevrolet Cavalier: 1. Pull the left control lever toward the driver to activate the high beam; 2. Push the lever away from the driver to keep the high beam on continuously. Taking the 2020 Chevrolet Cavalier as an example, it is a compact car with body dimensions of 4474mm in length, 1730mm in width, and 1471mm in height, a wheelbase of 2600mm, and a fuel tank capacity of 36 liters. The 2020 Chevrolet Cavalier is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 180Nm, paired with a 6-speed automatic transmission.
16
0
Share

Is it necessary to straighten the car head when reversing into the left-side parking space?

It is not necessary to straighten the car head when reversing into the left-side parking space. Reversing into the parking space: Reversing into the parking space is a mandatory test item for obtaining a small car driving license after 2013, mainly assessing the driver's ability to operate the vehicle in a confined space. It is a key assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into the parking space from both sides while in motion. Penalty points for reversing into the parking space: Exceeding the 210-second time limit, not following the prescribed route or sequence, failing to drive the front wheels over the control line before reversing, or not fully entering the parking space will result in a 100-point deduction. Stopping for more than 2 seconds during the process will result in a 5-point deduction each time. Key points for the reversing into the parking space test: Accurately judge the vehicle's position and operate the vehicle to correctly reverse into and exit the parking space from both sides by referring to the ground markings. During the test, the vehicle must not stop while moving forward or backward. The driver must reverse from one end of the road (with the vehicle crossing the control line) into the parking space and stop; then move forward out of the parking space, pass the control line at the other end, and reverse into the parking space again to stop; finally, move forward out of the parking space.
14
2
Share

How to Prevent Accidental Pressing of the Accelerator While Driving?

Methods to prevent accidentally pressing the accelerator while driving include: 1. Develop the habit of resting your right foot on the brake pedal when not in use; 2. Avoid sitting too close to the steering wheel; 3. Stay focused; 4. Familiarize yourself with the vehicle's structure and performance; 5. Be cautious about the left-right reversal when reversing. The functions of the accelerator are: 1. Controlling the engine speed by adjusting the amount of pedal press; 2. The accelerator regulates the carburetor to determine the engine's output power. The working principle of the accelerator is: Pressing the accelerator pedal directly controls the throttle valve, increasing the throttle opening, which allows more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, thereby increasing the engine's speed and accelerating the vehicle.
8
1
Share

What Are the Causes of Car Idling Shaking and Stalling?

Car idling shaking and stalling are caused by: 1. Failure of the vehicle's ignition system; 2. Loosening of components in the ignition system; 3. Severe carbon buildup in the engine; 4. Aging of engine components; 5. Excessive carbon buildup in the throttle; 6. Untimely replacement of the air filter; 7. Excessive carbon buildup in the fuel injector; 8. Problems with the ignition system; 9. Unstable oil pressure. Car idling is not a speed but a working condition. When the engine runs without load, it is called idling. When the engine is running and the accelerator pedal is fully released, the engine is in an idling state. The engine speed during idling is called the idling speed, which can be adjusted by changing the throttle opening size.
6
2
Share

How to Adjust the Seat in a Mondeo?

To adjust the seat in a Mondeo, simply press the adjustment buttons located on the side of the seat. The car seat must meet the requirements of adjustment convenience and comfort, meaning the driver can adjust the seat to an optimal position through the controls to achieve a better view, making it easier to operate the steering wheel, pedals, and gear lever. Taking the 2020 Mondeo as an example, it is a mid-size car with body dimensions of: length 4873mm, width 1852mm, height 1470mm, wheelbase 2850mm, fuel tank capacity 62.5l, trunk capacity 516 to 986l, and a body weight of 1592kg.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.