What are the reasons why the Nissan X-Trail air conditioner is not cooling?

What Causes Engine Misfire and Engine Fault Warning?

There are primarily 7 reasons why the engine fault light illuminates: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine fault light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the illumination of the fault light. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Spark plug failure, ignition coil issues, fuel pump malfunction, or clogged fuel lines can all result in poor fuel mixture combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine fault light. The most common is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's air intake is compromised, it may lead to engine pipe blockages, potentially causing the engine fault light to illuminate. A dirty or uncleaned air filter can obstruct proper airflow. Exhaust system issues: Exhaust faults may activate the engine fault light. Common causes include rear oxygen sensor failure, catalytic converter problems, or exhaust camshaft and bearing wear. Using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the electronic anti-theft system fails or the immobilizer control unit doesn't match the engine ECU, the anti-theft system may prevent normal engine operation while illuminating the fault light. When the engine fault light appears, follow these steps: First, check if the engine operates normally. If there's noticeable shaking, black smoke emission, or other abnormalities, avoid restarting the engine—especially if the red warning light is on. If the engine starts, turn it off for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the "ON" position (without depressing the clutch). The vehicle will initiate a self-diagnosis upon power-up. Observe whether the fault light disappears after 5-10 seconds. If the light persists, visit a service center promptly. Technicians can retrieve trouble codes using diagnostic tools to identify and address specific issues.

2

1

Share

Can a temporary license plate apply for ETC?

When applying for ETC, a vehicle registration certificate is required, and temporary license plates may not be eligible for processing. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Expressways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and copy of the vehicle registration certificate, and the page with the most recent annual inspection stamp on the registration certificate are required. If applying on behalf of someone else, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a debit card or credit card from the corresponding bank must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding ETC with a debit card. The definition of temporary license plates: Temporary license plates for vehicles are temporary driving permits issued by the vehicle management authorities before the vehicle is officially registered due to ongoing procedures. Temporary license plates are valid for no more than 15 days, and the owner should promptly apply for official license plates from the vehicle management authority. ETC deduction principle: There will be one or more ETC lanes on the expressway. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the purpose of paying tolls without stopping at the toll station is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and environmentally friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a clear target in the "13th Five-Year Plan" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-road coordination, and other smart transportation development directions, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stopped vehicle ahead, to prevent the ETC device of the preceding vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the preceding vehicle to avoid automatic sensing and paying for the preceding vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, and the deduction will fail. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the expressway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause the deduction to fail. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield may cause poor sensing. This is especially important for vehicles that have had accidents and had their windshields replaced, or for those who have modified their front windshields.

16

5

Share

Is it true that vehicle inspection is not allowed without ETC?

Vehicle inspection can be conducted without installing ETC. ETC (Electronic Toll Collection): A non-stop toll collection system. When a vehicle enters an ETC lane, the onboard electronic tag in the vehicle communicates with the microwave antenna in the ETC lane, and the data is processed by a computer to achieve the purpose of toll payment without stopping. Vehicle inspection items: Appearance inspection: Take the appearance inspection form to the appearance inspection station. First, check relevant documents to verify whether the third-party insurance (compulsory insurance) is valid. After the document check, the appearance inspection begins. This inspection mainly checks for damaged lights, whether the vehicle's appearance conforms to its original state, any changes to the suspension, as well as the sunroof, tires, etc. Emission testing: Queue up and wait for the test. Before the test, a staff member will conduct a preliminary inspection, mainly to verify whether the engine number matches the one on the vehicle license, and briefly check the appearance and condition of the vehicle. Then, fill out the emission test form. During the test, the inspector will drive the vehicle onto the testing line. Generally, new vehicles pass easily. Once the qualified emission test form is obtained, you can go to the window to pay and receive the emission compliance label. If the vehicle fails, it needs to be adjusted at a repair shop and retested, which requires paying the testing fee again. On-line inspection: If the appearance inspection passes, queue up for the on-line inspection. The inspection line checks the brakes, headlights (high beam), chassis, etc., which takes about 5-10 minutes. After the vehicle is driven off the line, you will receive a computer-printed form listing items such as brakes, lights, and horn. Qualified items are marked with "0," and unqualified ones with "X." Usually, issues are found with lights and brakes. Don't worry; inspection sites have areas for adjusting lights and brakes. After adjusting the brakes, the vehicle needs to be retested, but for lights, a stamp is sufficient after adjustment. Violation check: At the query window, obtain and fill out the "Motor Vehicle Periodic Inspection Registration Form," which can be obtained with the vehicle license. After filling out the form, submit it to the staff to check for any violation records. If there are no issues, the form will be stamped with "Verified, eligible for inspection." If there are violations, handle them as soon as possible with the violation notice. ETC billing principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the computer network technology is used to settle accounts with the bank, achieving the purpose of paying tolls without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and emissions and minimizing pollution; Reduced wear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can improve vehicle passing efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. Exploration will be conducted on the deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-to-road coordination, and other smart transportation development directions, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications.

17

1

Share

Can a Dash Cam Work Without a Memory Card?

A dash cam cannot work without a memory card, as the memory card is essential for storing video recordings. Without it, the device cannot record videos. A dash cam is an instrument that records images, sounds, and other relevant information during vehicle travel. Once installed, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents. For those who enjoy road trips, it can also document the journey through challenging terrains. While driving, it continuously records videos, along with timestamps, speed, and location data, functioning much like a black box.

15

0

Share

What does the Chinese translation of 'back car' mean?

The BACK of a car means turning the car around. The following is a detailed introduction about car turning: 1. Car turning (motor vehicle turning back) is an operation that changes the driving direction of the car by 180° under the condition of roads where turning is allowed. Sometimes, turning is also required under non-road conditions such as parking lots, and the methods are basically the same. 2. Car turning must strictly comply with the regulations of road traffic management: 'Motor vehicles are not allowed to turn at railway crossings, pedestrian crossings, curves, narrow roads, bridges, steep slopes, ramps, or sections prone to danger.'

14

3

Share

Is It Necessary to Apply Full Body Film on a New Car?

Applying full body film on a new car is necessary as it can better protect the car paint. Car film refers to applying a thin film-like material on the front and rear windshields, side windows, and sunroof of the vehicle. This film is also known as solar film or heat insulation film. Its main functions include blocking ultraviolet rays, reducing heat, preventing injuries caused by shattered glass, reducing glare, and protecting personal privacy through the one-way visibility feature of the solar film. Additionally, it can minimize damage to interior items and passengers caused by UV exposure, lower the interior temperature through physical reflection, reduce the use of car air conditioning, and consequently decrease fuel consumption.

9

2

Share

What are the reasons why the Nissan X-Trail air conditioner is not cooling?

What Causes Engine Misfire and Engine Fault Warning?

Can a temporary license plate apply for ETC?

Is it true that vehicle inspection is not allowed without ETC?

Can a Dash Cam Work Without a Memory Card?

What does the Chinese translation of 'back car' mean?

Is It Necessary to Apply Full Body Film on a New Car?

Is it considered overloading if a 5-seater car carries 5 adults and 1 child?

80,000-kilometer car maintenance items?

What Causes the Mazda6 Engine Warning Light to Illuminate?

Why was the Hyundai Veloster discontinued?