···
Log in / Register

What are the reasons why the Nissan Tiida cannot start?

4 Answers
Nascimento
07/29/25 11:44pm
The reasons and solutions for the Nissan Tiida failing to start are as follows: Use of inferior engine oil: During cold starts, factors such as cylinder pressure, engine speed, and temperature make it difficult for inferior oil to ignite, preventing the engine from starting. It is recommended to use the oil recommended by the manufacturer or a higher-quality fully synthetic oil. Battery depletion: When the voltage during startup is lower than the minimum operating voltage of the computer, the engine control unit does not function, preventing the engine from starting. In this case, the battery should be recharged or replaced. Starter relay sticking: During startup, there is only a slight "click" sound with no further response, which is caused by the starter relay sticking. In this situation, simply pressing the end of the solenoid to force it forward can connect the starter circuit, allowing the engine to start.
Was this review help?
4
1
Share
JosephineLee
08/16/25 3:00am
I've been driving a Tiida for several years and have encountered several instances where it wouldn't start. The most common issue is a dead battery, especially in winter or when the car hasn't been driven for a long time. The battery ages quickly and the voltage drops, making it impossible to start the engine. Another reason is problems with the ignition system, such as worn spark plugs or a short circuit in the ignition coil, which can prevent the engine from igniting the fuel. Fuel system failures are also quite common; if the fuel pump is broken, fuel can't be delivered, and the engine won't start. Regarding the key, a dead battery in the anti-theft system or signal interference can trigger the anti-theft mechanism, preventing the car from starting. Whenever I face such issues, I first check if the battery terminals are corroded or loose, and I might try jump-starting the car. If the battery is fine, it could be other components causing the problem, and it's best not to tinker with it myself—instead, I take it to a repair shop to have a mechanic check the circuits. Regular maintenance, like changing the oil and inspecting parts, can help avoid such troubles.
Was this review help?
9
3
Share
Expand All
StGavin
10/19/25 3:48am
As a Tiida owner, it's quite frustrating when the car won't start. The main reasons could be battery issues – after several years of use, insufficient power may prevent startup. Or it might be the ignition system, like faulty spark plugs, directly preventing engine ignition. For fuel system problems, a malfunctioning fuel pump could cut off fuel supply. A simple check method is to listen for sounds during startup: if there's a clicking noise but the car won't start, it's likely a battery or starter issue; if there's no sound at all, it might be an electrical circuit or key fault. I always carry jumper cables with me – in emergencies, I can ask a friend for a jump start. If all else fails, calling for roadside assistance and towing to a repair shop is the way to go. Regular check-ups can prevent major repairs, saving both hassle and money.
Was this review help?
17
1
Share
Expand All
LaPreston
12/02/25 4:24am
It's quite annoying when the Tiida won't start. Usually, the battery is the culprit, especially in cold weather or after prolonged parking, as it may run out of power and fail to start. Fuel system issues, such as a faulty fuel pump, can leave the car without fuel. The ignition system, like aging spark plugs, might fail to ignite. Other problems include a stuck anti-theft system or electrical short circuits. When something seems off, I usually check the key battery first to ensure the signal is working properly. Then, I inspect the battery terminals for corrosion or looseness. Remember not to force-start the car to avoid making things worse. If at home, calling for a tow truck is the safest option. Regularly ensuring the hood is properly closed and performing minor maintenance can help reduce breakdowns.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What to Do When Your Car Is Blocked and Can't Get Out?

Here are the solutions when your car is blocked and can't get out: 1. Check the insurance company of the blocking car: If your car is stuck due to another vehicle parked improperly, you can check the insurance company of that car. Usually, the insurance policy is pasted on the upper right corner of the front windshield. 2. If the other car is illegally parked on the roadside, call the police directly: Dial the traffic police number and report the location of the illegally parked car, which is obstructing normal traffic. After receiving the report, the traffic police will usually first identify the owner's information and contact them. If they can't be reached, a tow truck will be responsible for removing the vehicle. 3. Contact the parking lot administrator: If you are blocked in your residential community or a shopping mall parking lot, find a security guard or parking manager who can quickly contact the car owner.
3
1
Share

What does in-person verification at the DMV mean?

In-person verification at the DMV refers to the process where the individual must be physically present at the main hall of the municipal DMV or any of its branch offices, carrying their second-generation ID card, to have their information recorded on-site. This replaces the previous paper-based review process, saving time and eliminating the need to submit the ID card. Scenarios requiring in-person verification: Generally, after a driving school student completes their medical examination, the school will register the student's information online, known as online verification. Only in cases where a student's identity or phone number information is abnormal is in-person verification required. Both online and in-person verification are processes for the Ministry of Public Security to confirm identity online. In-person verification process: After the medical examination, go to the location designated by the driving school to fill out the registration application form. Submit the ID card, residence permit, and application form to the staff for in-person verification (the individual must be present as a photo will be taken on-site). After verification, submit the medical examination form, registration form, and application form to the on-site staff (if the ID card is demagnetized or is a temporary ID, it must also be submitted along with the forms). Functions of in-person verification: After verification, you can apply for self-scheduling of initial driver's license tests, cross-regional testing systems, and driver's license renewal upon expiration. It also allows for replacement of vehicle registration certificates, changes to vehicle or driver contact information, traffic violation inquiries, pre-selection of vehicle license plate numbers, vehicle inspection appointments, and other driver and vehicle management services.
10
0
Share

Can You Still Use a Car Cover in Rainy Weather?

You can use a car cover in rainy weather, but since the cover is not waterproof, it needs to be removed after the rain stops to allow the car to dry. The functions of a car cover: Primarily, a car cover is used to prevent rainwater from entering the vehicle, avoiding short circuits and damage to wiring or power sources; To protect the car paint from scratches, tree sap, insect residues, or acid rain damage during long-term parking; To shield the car from intense sunlight, which can harm the paint and rubber components; To prevent rainwater from corroding the metal parts inside the car during rainy days and to keep dust away during windy weather. When not to use a car cover: Do not cover if the car body has standing water: Over time, watermarks may form, which are difficult to remove. Typically, watermarks can only be addressed through car detailing, polishing, or grinding. Additionally, prolonged moisture on the paint can accelerate oxidation. If the car body has standing water and is covered, the trapped moisture will struggle to evaporate, leading to rusting of internal components over time. Do not cover if the car body is dirty: If the car is dirty, it must be washed before using a car cover to properly protect the paint; otherwise, the effort may backfire. Since the car cover is not a perfectly fitted protective film, it can shift relative to the car body, especially during strong winds. Covering a dirty car will cause dust and small stones on the surface to continuously rub against the paint, resulting in damage.
19
3
Share

How many kilometers can a fully fueled Fit travel?

Fit can travel five hundred kilometers on a full tank of fuel. More details about the Fit are as follows: 1. The Fit (FIT) adopts the overall design concept of "Exciting-H-Design", featuring Honda's latest family-style front face design concept "solidwing", where the front grille and headlights are integrated, highlighting sharpness and coolness. The side of the body uses a unique cool blade-style double waistline design. The tension-filled rear design is paired with LED light source rear combination lamps, presenting a more advanced texture. 2. It also offers seven rich body colors for consumers to choose from, namely Ocean Blue, Starlight Silver, New Moon Yellow, Ruili Red, Taffeta White, Satin Silver, and Offt Black.
5
0
Share

What are the hidden features of the 6th generation Camry 240g?

6th generation Camry 240g hidden features: key-linked opening of driver's window and sunroof; automatic folding and unfolding of rearview mirrors; lane change signal flash count, default is 3, options are 3, 4, 5, 6, 7; when the external rearview mirror adjustment switch is set to R and shifted to R gear, the external rearview mirror will automatically tilt down. Below is additional information: The sixth-generation Camry Classic edition boasts a noble appearance, comfortable interior space, perfect driving experience, meticulous safety protection, ubiquitous high-tech configurations, and a steadfast pursuit of environmental protection. From any perspective of examination and comparison, the Camry stands at the level of a world-class mid-to-high-end sedan.
16
2
Share

Will Overheated Tires Cause a Blowout?

Car tires will not blow out due to overheating. Effects of Overinflated Tires: Overinflated tires reduce the contact area with the ground, significantly increasing the pressure and wear per unit area. This can easily lead to loss of braking control, blowouts when encountering road protrusions or depressions, damage to the vehicle's suspension system, and an uncomfortable ride. Effects of Underinflated Tires: Underinflated tires increase the contact area with the ground, causing abnormal temperature rises inside the tire while driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of internal steel wires and fabric layers, creating hidden risks for blowouts. It also increases fuel consumption and reduces tire lifespan. Regularly Check Tire Pressure: Tire pressure is a critical factor affecting tire lifespan. Both overinflation and underinflation can reduce tire longevity to some extent. It is recommended to check tire pressure at least once a month. Regular Tire Rotation: Since the working conditions and loads on each tire vary—generally, the rear tires bear more load than the front tires, and the right tires more than the left—it is important to rotate the tires promptly as part of regular vehicle maintenance. Regularly Clean Tires: Driving on various complex road conditions can cause tire treads to pick up debris such as small stones and glass. These foreign objects can produce noise while driving and act as 'tire killers.' If not removed promptly, they can gradually puncture the tire, creating safety hazards and compromising driving safety.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.