What are the reasons why the Nissan Sylphy has power but won't start?

1 Answers
VanAdaline
07/29/25 12:19pm
The reasons why the Nissan Sylphy has power but won't start are as follows: 1. Insufficient fuel: When the car lacks its power source, "gasoline," it naturally won't start. If the issue is caused by running out of fuel, the solution is relatively straightforward. Depending on the situation, you can seek help from nearby car owners, borrow some fuel, or arrange for a tow to the nearest gas station as emergency measures. 2. Incorrect gear position: The car may not start if it's in the wrong gear. Generally, the correct gear positions for starting are P (Park) or N (Neutral). Sometimes, due to carelessness when parking, the car might be left in another gear, leading to a failure to start. Moreover, an incorrect gear position can also pose safety hazards. 3. Electrical circuit faults: These include blown fuses, open circuits in the high-voltage coil or low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs. 4. Electronic faults: Mainly referring to the malfunction of the central computer control board. 5. Fuel system faults: These can involve a faulty fuel pump, blocked fuel lines, clogged fuel filters, carbon buildup on spark plugs, or damaged fuel injectors, among others.
Was this review help?
11
3
Share
More Forum Discussions

What transmission does the BMW 3 Series use?

BMW 3 Series uses ZF's 8AT transmission. Here are the detailed introductions about BMW 3 Series: 1. The entire BMW 3 Series lineup uses ZF's 8AT transmission, which features relatively fast shifting speed and quite intelligent control logic. 2. AT transmission technology is relatively mature with good reliability and durability. This type of transmission is widely used. AT transmission is also called torque converter transmission, which connects to the engine through a torque converter. AT transmissions offer better reliability and stability than dual-clutch transmissions and can withstand higher torque than CVT transmissions. 3. The BMW 3 Series is a sporty mid-size sedan under BMW. The new domestically produced BMW 3 Series uses three engines in total: a low-power version 2.0-liter turbocharged engine, a medium-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine.
9
1
Share

How to Spray Water to Clean the Windshield?

To spray water and clean the windshield, pull the control lever toward the seat to release the windshield washer fluid. The functions of windshield washer fluid are: 1. Cleaning debris on the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for a clear view; 4. Eliminating static charges on the glass surface; 5. Reducing friction between the wiper and the glass to prevent scratches. The method to add windshield washer fluid is: 1. Turn on the wiper switch, and the washer fluid will spray from below the windshield; 2. Wait until the spray nozzles stop spraying, then open the washer fluid filler cap and add a small amount of fluid; 3. Turn on the wiper switch again to clear out any remaining fluid; 4. When no more fluid sprays out the second time, add 4 liters of washer fluid, then securely close the filler cap.
19
3
Share

How to Change Lanes Before an Intersection?

When changing lanes before an intersection, drivers should follow the guidance arrows and enter the desired lane within the dashed line area. Below are two scenarios of running a red light when turning right: 1. Arrow indication: If the right-turn signal is an arrow, running the red light will result in a 6-point deduction. 2. No right-turn arrow: Generally, if there is no right-turn arrow or a no-right-turn sign, turning right on red is not considered running a red light. Here is additional relevant information: 1. Article 44 of the Road Traffic Safety Law stipulates: Motor vehicles passing through intersections shall proceed according to traffic signals, signs, markings, or the directions of traffic police. 2. Penalty: In China, running a red light results in a one-time 6-point deduction and a fine of 200 yuan.
17
4
Share

Where is the oil filter located on the Highlander?

The oil filter on the Highlander is located underneath the chassis. Functions of the oil filter: 1. Prevent larger mechanical impurities from entering the oil pump; 2. Filter out impurities in the oil with diameters of 0.05 to 0.1mm or larger; 3. Supply clean lubricating oil to the main oil passage and friction surfaces. Taking the 2021 Highlander as an example, its body dimensions are: length 4890mm, width 1925mm, height 1720mm, wheelbase 2790mm, fuel tank capacity 78.5 liters, and curb weight 1910kg. The 2021 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220PS, maximum power of 162kW, maximum torque of 350Nm, paired with a 6-speed automatic transmission.
14
4
Share

What Does the Exclamation Mark on a Car Dashboard Mean?

An exclamation mark displayed on a car dashboard can indicate different issues depending on the context: 1. A circular exclamation mark is the brake system fault light; 2. A parenthesis exclamation mark is the tire pressure warning light; 3. A yellow triangle exclamation mark indicates the traction control fault light; 4. A yellow gear dashboard light with a circular exclamation mark represents the automatic transmission fault warning light. Essential dashboard warning lights that require immediate inspection include: 1. The tire pressure warning light, which illuminates when there is an issue with tire pressure; 2. The ABS indicator, signaling a fault in the anti-lock braking system that must be checked promptly; 3. The engine fault indicator, which shows the engine's operating status—usually yellow or red—and requires immediate engine inspection if it stays lit; 4. The battery indicator, which should turn off during normal startup—if it lights up, it indicates a battery issue that needs prompt repair.
14
2
Share

Is Wheel Alignment Necessary After Changing Car Tires?

Wheel alignment is not necessary after changing car tires. Situations that require wheel alignment include: 1. Damage to the chassis and suspension caused by an accident; 2. Replacement of steering system and components; 3. Unilateral wear on front or rear tires; 4. Replacement or adjustment of the suspension system; 5. The car pulling to the left or right when driving straight. Benefits of wheel alignment: 1. Extends tire lifespan; 2. Improves handling; 3. Enhances fuel efficiency; 4. Ensures driving safety. Steps for wheel alignment: 1. Connect to power and turn on the machine; 2. Attach targets to the wheels, with the targets facing the camera; 3. Click to enter the measurement program on the computer interface; 4. Open the camera to confirm if the targets are correctly positioned, adjust if necessary; 5. Click to measure and follow the prompts to obtain measurement data; 6. Adjust the total front toe vehicle data to the green standard range.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.