What are the reasons why the Mercedes-Benz S400 hybrid cannot start?

1 Answers
Randy
07/29/25 9:37pm
The reasons why the Mercedes-Benz S400 hybrid cannot start are: 1. Mechanical damage to the throttle front drive mechanism; 2. Missing engine speed signal; 3. Collision signal in the ignition sequence; 4. Insufficient battery power; 5. Fuel pressure too low; 6. Engine system failure. Taking the 2021 Mercedes-Benz S400 as an example, it belongs to the large car category, with body dimensions of: length 5290mm, width 1921mm, height 1503mm, wheelbase 3216mm, and fuel tank capacity of 76l. The 2021 Mercedes-Benz S400 has a front suspension of double-wishbone independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 3.0l twin-turbocharged engine, with a maximum horsepower of 313ps, maximum power of 230kw, maximum torque of 450nm, and is paired with a 9-speed automatic transmission.
Was this review help?
20
3
Share
More Forum Discussions

How to Repair a Scratched Rearview Mirror Housing?

If the car hasn't undergone its first maintenance yet, some scratches can be addressed by requesting assistance from the repair personnel at the 4S dealership during the first maintenance service. If the black part isn't exposed, it indicates that the car's primer hasn't been damaged, making the touch-up process somewhat simpler. Repair can be done through waxing. Before repairing, it's necessary to clean the scratches on the rearview mirror thoroughly, using a straight-line wiping method.
17
1
Share

What to Do If the Car Won't Start After Being Parked for a Month?

This method is the simplest and most direct, but it only works for manual transmission cars. Just find a few people to push the car together and then start the car. When starting, begin slowly. The driver of the front car should pay attention to the movement of the rear car, and the driver of the rear car should signal the front car promptly after the vehicle starts. You need to find a car with a charged battery and a set of jumper cables. Open the hood to locate the other car's battery, then connect the two batteries using the jumper cables.
8
5
Share

How to Display Tire Pressure on Corolla?

First, ensure the vehicle is in the tire pressure state, then press and hold the SET button. Press the SET button five times consecutively to enter the tire matching interface. Select the tire you wish to match. After 3 seconds or more, upon hearing a "beep," it indicates that you have entered the setup function state. Press and hold the ADJ button for more than 3 seconds, then release. Next, press and hold the MENU button for 3 seconds, and when you hear a sound, choose to save and exit.
2
3
Share

How to Remove the Rear Seats of a CC?

First, pull the strap located under the rear seats of the CC, then you can flip the seats up. On both sides of the rear seats of the Volkswagen CC, you can find two red latches, which are used to secure the rear seats. Then, press the two red buttons on the rear seats simultaneously with both hands and pull downward to fold the seats down. After that, unbuckle the seat belt clips on the rear seats, and the removal of the rear seats is now complete.
17
1
Share

How to Adjust Roewe Rearview Mirrors?

Adjust the left and right positions so that the left edge of the mirror just cuts off your right ear in the reflection. For the up and down positions, place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's area. When adjusting the up and down positions of the right rearview mirror, ensure a larger ground area is visible. Similarly, adjust the left and right positions so that the car body occupies 1/4 of the area.
1
0
Share

How to Resolve the P0420 Trouble Code?

When the P0420 trouble code appears in a vehicle, it primarily indicates that the catalytic converter's efficiency is below the threshold value. The likely cause is a damaged catalytic converter. Here are three quick solutions to address the P0420 trouble code: 1. Replace the vehicle's original catalytic converter: Be sure to avoid aftermarket parts, as they may not last long and the warning light could reappear. 2. Install a component: Use parts like the TDTAS trouble code eliminator to repair the data and clear the P0420 warning light. 3. ECU backend deactivation: Access the engine ECU backend using a car diagnostic tool and disable the P0420 trouble code.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.