···
Log in / Register

What are the reasons why the left front window of Nissan NV200 cannot be raised?

3 Answers
McIsabel
08/28/25 4:20am
Nissan NV200 left front window cannot be raised for the following reasons: System issues: Resolved by system flashing, which means there are certain problems with the electronic control system from the factory. The only solution is to return to the 4S shop for a system update. Motor overheating protection: To protect the power supply circuit, most window lift motors have an overheating protection mechanism. If components overheat for some reason, the motor will enter an overheating protection state. If the window lift system fails due to this, it will return to normal after some time. Excessive resistance in the glass guide channel: During use, dust accumulates in the door glass guide channel, increasing resistance. Over time, this may make the window harder to raise and, in severe cases, trigger the anti-pinch function. Regular cleaning with water can help protect the guide channel to some extent.
Was this review help?
8
3
Share
VanEthan
09/10/25 2:50am
There are several common reasons why the left front window of the Nissan NV200 won't roll up. First, consider a faulty window lift motor—aging or worn-out motors can fail, resulting in insufficient power. Second, a blown fuse in the fuse box near the driver's seat could be the culprit; simply replace it if burnt out. Poor contact in the switch assembly may also render the button unresponsive, especially in humid environments prone to short circuits. Accumulated dust or dried-up lubricant in the window track can cause the glass to jam. Wiring issues like aging or breaks are common in older vehicles, where damaged wires interrupt the current. Additionally, a malfunctioning door control module may prevent commands from being transmitted. It's advisable to first check if the fuse is blown, as replacing it is a simple DIY fix. If that doesn’t work, avoid forcing the window to prevent further damage. In cold winters, plastic components may harden and stick—try operating the window after warming up the car. Prioritize safe driving and seek professional repair promptly to avoid risks from sudden failures. Regular track cleaning can help prevent such issues.
Was this review help?
2
2
Share
Expand All
AmirAnn
10/24/25 3:40am
Someone in my car club has encountered the issue of the NV200's left front window not rolling up, and I've experienced a similar problem. The most common cause is a faulty window motor—excessive use can lead to fatigue and failure. Another possibility is a blown fuse; check the fuse labeled 'Power Window' in the fuse box. Sometimes, the switch button becomes unresponsive due to dust or moisture affecting the contacts. Dirty glass tracks or obstructions can also make the window hard to move, even manually. In older cars, wiring degradation and broken circuits are common, cutting off power to the system. A less frequently mentioned issue is a malfunctioning door control unit, which can paralyze the entire system. When troubleshooting, start by checking the fuse—replacing it yourself costs just a few dollars. If that doesn’t work, avoid forcing it and have a mechanic use diagnostic tools to test the circuit and motor. Cold weather can make components brittle and sluggish, so addressing the issue in the morning may yield better results. Remember, safety is key—driving with a non-functional window is unsafe.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What are the reasons for the ignition failure due to brake system malfunction?

The reasons for the ignition failure due to brake system malfunction are as follows: 1. The vehicle is out of fuel or the fuel quality is inappropriate. 2. The vehicle battery is dead: This could be due to reasons such as leaving the headlights on for a long time, resulting in a drained battery, or the battery's lifespan has expired. It is generally recommended to replace the battery every three years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit malfunctions. 3. Incorrect gear position: For automatic transmission vehicles, the gear must be in the P (Park) or N (Neutral) position when starting. If the gear is in R (Reverse) or D (Drive), the vehicle may not start. Some manual transmission vehicles may also fail to start if the clutch is not depressed. 4. Lack of antifreeze: If antifreeze is not added in winter, the entire cooling system may freeze, leading to engine cracks, malfunctioning water pumps, ignition failure, and damage to other engine components. 5. Excessive carbon buildup in the vehicle.
6
1
Share

Is the 2019 Sagitar compliant with China 6 emission standards?

The 2019 Sagitar meets China 6 emission standards. Relevant details are as follows: 1. Powertrain: The 2019 Sagitar is equipped with an EA211 series engine, delivering a maximum power of 110 kW, peak torque of 250 Nm, and 150 horsepower. It comes with a 7-speed dual-clutch transmission. 2. Dimensions: The 2019 Sagitar measures 4655mm in length, 1780mm in width, and 1453mm in height, with a wheelbase of 2651mm. 3. Features: The 2019 Sagitar comes standard with hill start assist, cruise control, front and rear parking sensors, rearview camera, eco driving mode, and heated/ventilated seats.
13
2
Share

Will the co-driver be penalized for holding a dog?

The co-driver will be penalized for holding a dog. Placing a pet in the co-driver's seat is considered an act that hinders driving safety, resulting in a fine of 200 yuan and a deduction of 2 points. Here are some precautions for traveling with a pet dog: 1. Place the dog in the back seat: If the dog sits in the co-driver's seat, it can easily distract the driver. Therefore, even if you are traveling alone with your dog, do not let them sit in the co-driver's seat out of concern that they might get bored in the back seat. Additionally, if the dog cannot remain calm in the back seat and engages in excessive movement, it is best to place them in a dog crate to avoid driving hazards. 2. Maintain ventilation: Providing fresh air in a timely manner can make the journey more enjoyable for the dog. However, do not open the window too wide, as many dogs might mistake an open window for arrival at the destination and attempt to jump out. 3. Do not let the dog stick its head out of the window: If the dog sticks its head out of the window while the car is moving at high speed, it can easily get its eyes injured by wind or dust. Moreover, during overtaking, the distance between two cars can be very small, which might lead to accidental injury or fright for the dog.
3
4
Share

Detailed Explanation of Pajero's Super Select 4WD?

Detailed information about Pajero's Super Select 4WD is as follows: 1. Full-time 4WD: The most significant feature of this system is the effective combination of part-time 4WD and full-time 4WD, maximizing the advantages of each. When driving normally on paved roads, the vehicle uses rear-wheel drive. On slippery roads, the 4H gear can be selected. The 4H gear in Super Select 4WD is quite different from the traditional part-time 4WD's 4H mode. It does not rely on a transfer case to rigidly connect the front and rear drive shafts but uses a dedicated multi-plate clutch-type center differential to regulate the torque distribution between the front and rear axles in this gear, equivalent to a traditional full-time 4WD. 2. Pajero Design: Every aspect of the 2020 Mitsubishi Pajero V97's design reflects practicality while maintaining a unique appearance. For example, the distinctive design of the illuminated door mirrors is eye-catching.
5
3
Share

What to Do When the BMW 320 Air Conditioning Doesn't Cool?

Solutions for the BMW 320 air conditioning not cooling are as follows: 1. Check the Compressor Belt: If the belt is too loose, it should be adjusted; otherwise, it can easily lead to poor cooling performance of the air conditioning system. Check the hose connections of the air conditioning system for any oil traces. If leaks are found, promptly visit a repair shop for resolution. 2. Clean the Condenser: Keeping the surface of the car condenser clean facilitates the dissipation of heat to the outside. Regularly cleaning the condenser surface can significantly improve the cooling efficiency of the air conditioning system. 3. Check the Refrigerant Level: Inspect the refrigerant level. The sight glass is usually installed on the dryer's cap. Run the engine and the air conditioning system, and observe the refrigerant flow through the sight glass. If the air conditioner is working properly, you should see clear refrigerant continuously flowing, occasionally with small bubbles during high temperatures, and small bubbles visible when the air conditioning system is turned off.
10
3
Share

What to Pay Attention to When Buying a Flood-Damaged Car?

Flood-damaged cars should not be purchased for the following reasons: 1. Electronic system malfunctions: The most water-sensitive components in a car are the electronic systems. Although modern vehicles have waterproofing for electronic circuits, they cannot withstand heavy or prolonged water exposure. If water remains in the engine compartment for an extended period, it can cause wire corrosion and short circuits, leading to electronic function failures at best or even spontaneous combustion at worst. 2. Engine malfunctions: Generally, if a car's engine compartment has been submerged in water, do not attempt to start it. There is no guarantee that the engine is free of water, and starting it directly could result in complete engine failure. 3. Transmission malfunctions: The low value of flood-damaged cars often lies in their transmissions. Transmissions have vent holes to release pressure caused by temperature changes, usually located on the upper part of the transmission. If the water level is high enough to submerge the engine compartment, water may enter the transmission. Once water gets inside, it can cause issues like slipping, shaking, and rough gear shifts, or in severe cases, require a major transmission overhaul. 4. Interior mold: Rainwater contains many impurities, and a flooded car interior creates an extremely humid environment prone to mold growth. If the vehicle is not dried promptly, mold can ruin fabric and leather materials inside the car and produce various unpleasant odors.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.