What are the reasons why the Jetta key cannot be turned?

1 Answers
JaylaLee
07/29/25 12:40pm
The reasons why the Jetta key cannot be turned are: 1. The lock cylinder is damaged, causing the car key to be unable to turn; 2. The vehicle's parking angle was not adjusted properly when parking, causing the steering wheel to not return to the correct position, which makes it difficult to turn the key due to the steering wheel lock being engaged. Taking the 2021 Jetta VS5 as an example, it is a compact SUV with body dimensions of: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm, and fuel tank capacity of 51L. The 2021 Jetta VS5 is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a manual transmission.
Was this review help?
6
1
Share
More Forum Discussions

At what age can I obtain a B2 driver's license?

You must be at least 21 years old to obtain a B2 driver's license. Here is relevant information about the B2 driver's license: 1. Vehicle types permitted with a B2 license: A B2 license allows you to drive heavy-duty, medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy-duty and medium-duty trucks are mainly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy-duty trucks. Large, heavy, and medium-sized specialized operation vehicles refer to vehicles equipped with special equipment or tools, such as water sprinklers, concrete mixers, fire trucks, etc. 2. Height requirement for obtaining a B2 license: Large vehicles require a height of at least 1.55 meters.
5
0
Share

Is it accurate to check the engine oil after parking overnight?

It is accurate to check the engine oil after parking overnight. Here are the relevant details about checking engine oil: 1. Reasons for checking engine oil: Overfilling engine oil can affect the normal operation of the crankshaft. It can also increase vehicle fuel consumption, as when the crankshaft journal moves to the bottom dead center, it may come into contact with the oil, creating resistance and affecting normal operation. Insufficient engine oil, which is not enough for circulation lubrication, is also problematic, as it can accelerate wear on internal engine components and lead to engine damage. 2. Reason why checking after parking overnight is accurate: After the vehicle has been parked overnight, all the engine oil flows back into the oil pan, making it the ideal time to check whether the oil level is accurate.
7
3
Share

What does it mean when the Traffic Management 12123 app shows a locked driver's license status?

Driver's license locked status means that certain procedures such as transfer of registration cannot be processed temporarily. The following are common reasons for a driver's license being locked: Probation period not completed: According to relevant laws, procedures related to driver's license such as transfer of registration can only be processed one year after obtaining the license. Failure to submit physical condition certificate: For drivers aged 60 or above, if they fail to submit physical condition certificate within one year after the end of a scoring cycle; For drivers holding licenses for large buses, tractors, city buses, medium buses, trolleybuses, or trams, if they fail to submit physical condition certificate within one year after the end of two scoring cycles; For drivers holding licenses for small automatic transmission vehicles for the disabled, if they fail to submit physical condition certificate within one year after the end of three scoring cycles. Solution: Submit physical condition certificate. Failure to renew the driver's license for more than one year after its expiration. Drunk driving record not cleared; Record of 12 penalty points not cleared; Driver's license is in the process of being revoked, suspended, or confiscated; Other traffic violations not handled. If none of the above reasons apply, or if there are no related circumstances, it is possible that the driver's license has been fraudulently used. In this case, you need to visit the traffic management department in person to clarify and resolve the issue, and restore the normal status of the driver's license.
5
0
Share

How Long Does It Take to Learn Automatic Transmission?

Learning automatic transmission at a driving school varies in duration depending on the region, the driving school, and individual factors such as sense of direction and aptitude. Some driving schools require queuing after enrollment, followed by waiting for notifications after passing Subject 1 to start learning Subject 2. Continuous learning can be completed within a month. Others may require queuing for each subject, making the timeline unpredictable and potentially extending to several months. Each subject typically takes over half a month to learn, with long waiting periods. Details are as follows: 1. Subject 1: Traffic safety laws, regulations, and related knowledge. The exam question bank's structure and basic question types are set by the Ministry of Public Security, with provincial traffic management departments adapting it to local conditions. 2. Subject 2: Field driving skills, including reversing into a garage, stopping and starting on a slope, turning at right angles, driving on curves, and parallel parking. In cities like Shanghai, Subject 2 includes nine mandatory tests: reversing into a garage, turning at right angles, parallel parking, driving through tunnels, stopping to take a card, driving on curves, U-turns on narrow roads, emergency stops, and stopping and starting on a slope. 3. Subject 3: Road driving skills, covering preparation before starting, straight-line driving, lane changes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones and bus stops, meeting traffic, overtaking, U-turns, and night driving. 4. Subject 4: Safe and civilized driving knowledge, focusing on related safety and civilized driving concepts.
10
5
Share

Go Straight, Turn Left or Turn Right?

When going straight yields to turning right, the straight-going vehicle is on the main road, while the right-turning vehicle is preparing to merge from the auxiliary road. The straight-going vehicle on the main road has the right of way. The following are the right-of-way rules for motor vehicles passing through intersections without traffic signals: 1. Right-side road: Yield to vehicles coming from the right-side road; 2. Straight-going: Turning vehicles yield to straight-going vehicles; 3. Left-turning: For vehicles traveling in opposite directions, right-turning vehicles yield to left-turning vehicles. Left-turning vehicles spend more time at the intersection than right-turning vehicles, affecting other vehicles and pedestrians for a longer duration. Therefore, right-turning vehicles should yield to left-turning vehicles. If left-turning vehicles were to yield, it would exacerbate the aforementioned adverse factors, hindering the quick clearance of vehicles at the intersection and causing congestion.
6
3
Share

Can Transmission Faults Be Resolved Without Disassembly?

No, transmission faults cannot be resolved without disassembly. Below is an introduction to transmission faults: Common Transmission Faults: Slipping transmission, transmission oil leakage, jerking, transmission noise, difficulty in shifting gears, etc. Disassembly and Assembly of the Transmission: Prepare tools and small boxes for storing various parts, and perform the disassembly on a clean and flat workbench. If there is no repair manual for the vehicle, prepare a notebook and adhesive tape for marking; disassembly should start from the front oil pump, proceeding from front to back and from outside to inside, while keeping records at all times; most automatic transmission housings are made of cast aluminum, so pry bars and iron tools should never be used directly for disassembly; when disassembling the hydraulic control valve body, be careful and meticulous, and when separating the upper and lower valve bodies, prevent balls, retaining rings, etc., from falling to the ground, and accurately remember their correct positions; when disassembling and inspecting the one-way clutch, pay attention to its correct assembly direction, and never reverse it during assembly; after disassembling the parts, clean them with gasoline and dry them with low-pressure compressed air, avoiding the use of fiber-shedding cotton yarn to wipe valve components; O-rings and other vulnerable parts should, in principle, be replaced with new ones after disassembly, and aged, deformed, or worn vulnerable parts should not be reused; new clutch plates and brake plates should be soaked in transmission oil and installed only after fully absorbing the oil; valve cores, pistons, seals, etc., should be coated with transmission oil during assembly; during assembly, tighten screws strictly according to the specified torque.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.