···
Log in / Register

What are the reasons why the Honda Vezel won't start?

4 Answers
McWalker
07/29/25 6:00pm

Here are the related reasons why the Honda Vezel won't start: 1. Battery depletion: Symptoms: The starter begins to turn but lacks sufficient speed (weak), and later the starter only clicks without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can cause the vehicle to fail to start, especially during long-term short-distance, low-speed usage in winter, when the battery voltage drops below the rated value, making it impossible to start or operate normally. Emergency solution: If this occurs, call the service station for assistance, or try jump-starting the vehicle, or temporarily start it, but then you must take the vehicle to the service station to recharge the battery. 2. Fuel flow obstruction: Symptoms: No fuel pressure in the engine's fuel supply line. This situation often occurs on particularly cold mornings due to long-term contamination of the fuel lines. At extremely low temperatures, water and debris mix, blocking the fuel lines, resulting in failure to start. Emergency solution: Place the vehicle in a warm environment, and it may start after a while; or thoroughly resolve the issue by cleaning the fuel lines.

Was this review help?
19
5
Share
DeLiam
08/14/25 10:02am

I've been driving a Honda Vezel for almost five years and have encountered several instances where the car wouldn't start. The most frustrating one was on a winter morning when the engine didn't respond at all after turning the key. After inspection, it turned out the battery was aging, and the insufficient voltage prevented the starter from turning. Batteries generally need replacement every two to three years, and they're more prone to draining in cold weather. Jump-starting worked for me, but it's a temporary fix with long-term risks—replacing the battery solved the issue permanently. It's not just the battery; problems like a faulty starter relay or a blown fuse can also interrupt the circuit. If the dashboard lights are on but there's no sound when starting, it might indicate an electrical fault. Other issues, such as a failing fuel pump, clogged fuel injectors, or a malfunctioning key immobilizer system, can also prevent the car from starting. For safety, I recommend first checking simple components like cleaning battery terminals or trying a spare key. If that doesn't work, head to a dealership service center immediately for diagnosis and repair—don't risk being stranded on the road.

Was this review help?
2
5
Share
Expand All
OStephen
10/14/25 3:34am

Failure to start is mostly caused by issues in the starting system, power supply, or fuel system. The Honda Vezel's engine relies on electricity to activate the starter; when the battery is low or connections are loose, dashboard lights may flicker but fail to crank. A damaged starter motor or faulty relay may result in only a clicking sound when turning the key, without the engine starting. In the fuel system, an aging fuel pump or clogged filter can lead to insufficient fuel supply, preventing the engine from starting due to lack of fuel. Additionally, carbon buildup on ignition coils or spark plugs affecting ignition, or sensor failures such as the crankshaft position sensor, can also cause starting issues. It's recommended to listen for sounds to diagnose: no sound may indicate a power issue; clicking without starting could point to fuel or ignition problems. Regular maintenance, such as checking the battery and replacing spark plugs periodically, can effectively prevent such troubles.

Was this review help?
5
1
Share
Expand All
LylaLynn
11/27/25 4:29am

I just bought a Honda Vezel not long ago, and I was startled when the car wouldn't start, thinking it was a major issue. Later, after calling the 4S store for advice, I learned that a common cause is the remote key running out of battery. Replacing the coin battery solved the problem immediately. Insufficient fuel is another point often overlooked by beginners; if the fuel gauge shows empty, the engine naturally won't start. For safety, if you encounter this situation, you should immediately turn on the hazard lights and pull over to the side of the road, then seek help from professionals. Avoid random attempts to prevent damaging more components. Simple preventive measures include regularly checking the key's status and fuel level, developing the habit of taking a glance before starting, and reducing unnecessary anxiety.

Was this review help?
14
0
Share
Expand All
More Forum Discussions

What brand is the Leiling shock absorber?

The shock absorber of the Leiling is from the KYB brand. KYB combines advanced hydraulic technology with electronic technology, growing alongside the era with its core vibration control and power control technologies. It integrates system technology and electronic control technology, continuously providing strong support for comfort and safety across various industries. Below is an explanation about shock absorbers: 1. Shock absorber (Absorber) is used to suppress the oscillation after the spring absorbs shocks and impacts from the road. Widely used in automobiles, it accelerates the attenuation of frame and body vibrations to improve the vehicle's ride smoothness. 2. When passing over uneven road surfaces, although the shock-absorbing spring can filter road vibrations, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring bounce. 3. If the shock absorber is too soft, the body will bounce up and down; if it's too hard, it will create excessive resistance, hindering the spring's normal operation. During modifications to the suspension system, a hard shock absorber should be paired with a hard spring, and the spring's hardness is closely related to the vehicle's weight. Therefore, heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the crankshaft's torsional vibration (the phenomenon where the crankshaft twists due to the impact force of cylinder ignition).
5
1
Share

How to Start a Lamando Automatic Transmission Car?

Starting steps for a Lamando automatic transmission car: 1. Before starting the car, ensure the gear lever is in P (Park) or N (Neutral) position. 2. When starting, coordinate the brake, handbrake, and accelerator properly. 3. After shifting to D (Drive) gear, release the handbrake while slowly lifting the brake pedal, then gently press the accelerator to allow the vehicle to start smoothly. Below is a detailed introduction to the Lamando: 1. As a sporty coupe specifically launched by SAIC Volkswagen for the Chinese market, the Lamando was officially promoted as a "luxury and comfortable wide-body coupe" at its debut. Its appearance is indeed dynamic and stylish. After the mid-term facelift, its configuration was upgraded while its sporty attributes were enhanced, making it quite attractive to many young consumers. 2. In terms of configuration: The Lamando comes standard with LED headlights, engine start-stop, auto hold, in-cabin PM2.5 filter, ambient lighting, etc. Mid-to-high trim models offer additional options such as sport seats, an 8-inch LCD screen, cruise control, and carbon fiber-style interior trim. 3. In terms of power: The Lamando is equipped with a 1.4T turbocharged engine. The entry-level model features a low-power version with a maximum power of 96kW (131PS) and a peak torque of 225N·m, paired with a DSG 7-speed dual-clutch transmission or a 5-speed manual transmission. Mid-to-high trim models are equipped with a high-power version of the 1.4T engine, delivering a maximum power of 110kW (150PS) and a peak torque of 250N·m, matched with a DSG 7-speed dual-clutch transmission. As a sport-oriented model, the high-power version is more recommended.
16
0
Share

Where is the USB port located in the 2015 Sagitar?

The USB port of the 2015 Sagitar is located below the central control screen. The main functions of the USB port in a car are: utilizing the car's standard power supply to charge electrical devices via the USB interface or serving as a fixed power supply port for electrical devices. Precautions for using the USB port: 1. Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. 2. Do not connect too many electrical devices to prevent overloading and damaging the car battery and alternator. 3. Avoid using the USB port during thunderstorms to prevent lightning strike accidents. 4. Do not use the USB port in humid environments. Rust or water stains may cause the USB device to fail to connect properly.
3
2
Share

What are the body dimensions of the Chevrolet Orlando?

The Chevrolet Orlando has a length, width, and height of 4684 1807 1627mm, with a wheelbase of 2796mm. Below is an introduction to the Chevrolet Orlando: 1. The Chevrolet Orlando is a compact SUV launched by Chevrolet. As a compact SUV, compared to other models in the same class, this car offers excellent space performance. To meet the diverse needs of consumers, it is available in both five-seat and seven-seat versions. 2. Exterior design: The car features Chevrolet's family-style design, with a large front grille that uses a blackened design. The upward-slanting headlights are connected to the grille, further highlighting the car's refined feel. For those who need more space, the seven-seat version is recommended, as its spaciousness aligns well with the demands of Chinese consumers. 3. Powertrain: The car is equipped with a 1.3T turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 230Nm. 4. Transmission system: The engine is paired with a 6-speed automatic transmission, providing overall performance that meets daily driving needs.
19
4
Share

How to Adjust the Time on the Bora Dashboard?

Method to adjust the time on the Bora dashboard: The button on the left side of the dashboard adjusts the hours; the button on the right side adjusts the minutes. By using both buttons together, you can set the time. Below is an introduction to the dashboard: 1. Generally, conventional car dashboards include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. 2. In modern cars, the dashboard also requires a voltage regulator, specifically designed to stabilize the power supply voltage for the dashboard, suppressing fluctuations to ensure the accuracy of the car dashboard. 3. Additionally, most dashboard displays rely on sensors. The sensing device changes its resistance value based on the monitored object's state, which is then displayed on the dashboard. The most prominent gauge on the dashboard is the speedometer, which indicates the car's speed in km/h (kilometers per hour). The speedometer actually consists of two gauges: one is the speed gauge, and the other is the odometer.
18
3
Share

Where is the tire pressure monitoring system located on the Baojun 730?

Baojun 730's tire pressure can be viewed directly on the dashboard. Only the Luxury and Premium trim levels of the Baojun 730 are equipped with a tire pressure monitoring system, which is a direct-type system that displays tire pressure data on the dashboard without requiring any manual operation. The tire pressure monitoring system is a type of active safety device. It can promptly alert the driver when there are dangerous signs in the tires, prompting them to take appropriate measures, thereby preventing serious accidents. With a tire pressure monitoring system, we can ensure that the tires always operate within the specified pressure and temperature ranges, reducing tire damage and extending their service life. Data shows that driving with insufficient tire pressure—when the pressure drops 10% below the normal value—reduces tire life by 15%. When the tire pressure is too low, it increases the contact area between the tire and the ground, thereby increasing friction resistance. If the tire pressure is 30% below the standard value, fuel consumption will rise by 10%. When the tire pressure is excessively high, it reduces the tire's own shock absorption effect, increasing the burden on the vehicle's suspension system. Prolonged use under such conditions can cause significant damage to the engine chassis and suspension system. Additionally, uneven tire pressure can easily lead to braking deviation, further increasing wear on the suspension system.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.