···
Log in / Register

What are the reasons why the Fit won't start?

5 Answers
AuroraLynn
07/23/2025, 09:07 AM

The reasons why the Fit won't start: 1. The steering wheel is in a locked position; 2. The gear was not returned to P when parking; 3. The smart key for one-button start is low on battery; 4. The car battery is dead; 5. No antifreeze was added; 6. The fuel gauge shows below the red line. The Fit has a length, width, and height of 4109mm, 1694mm, and 1537mm respectively, with a wheelbase of 2530mm. In terms of power, the car is equipped with a 1.5L naturally aspirated engine, paired with a CVT transmission, delivering a maximum power of 96kW and a maximum torque of 155Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

Was this review help?
4
3
Share
BradyFitz
08/10/2025, 06:55 AM

My Fit wouldn't start, and I've encountered this issue several times. As a veteran driver with over a decade of experience, the most common cause is battery problems. An aging or dead battery, especially during cold winter starts when the load is high—the Fit's battery is located at the front lower left of the engine bay, making it prone to leakage or corroded terminals. Another issue could be the ignition system, like worn spark plugs or a faulty ignition coil. Last time, my neighbor's car wouldn't start in the rain due to spark plug issues, and it was fixed after spending over 200 yuan to replace them. Fuel-related problems, such as an empty tank or a malfunctioning fuel pump, can also cause startup failure—my friend's car wouldn't start because the fuel filter was clogged and had to be cleaned at the shop. Starter or relay failures aren't uncommon either; if there's no sound when starting, that's a clear sign. I recommend trying a portable jump starter in emergencies and regularly maintaining the battery to check its lifespan—don't skimp on small costs and risk bigger troubles. Overall, the Fit is reliable, but ignoring these minor issues can compromise travel safety.

Was this review help?
17
5
Share
Expand All
DiSimon
09/22/2025, 12:38 AM

As a young female car owner, there was a time when my Fit wouldn't start in the parking lot, which was particularly panic-inducing. It turned out the spark plugs needed replacement. The Fit commonly uses NGK spark plugs with a lifespan of about 30,000 kilometers; prolonged use can lead to carbon buildup causing ignition failure. Regarding the battery, if you forget to turn off the lights or leave the car parked for too long, it's common for the battery to drain—check the brightness of the headlights to assess the situation. Fuel system issues, such as fuel pump failure, are also frequent occurrences. Once, after refueling, my car wouldn't start, and it was due to insufficient fuel delivery from the pump. Also, relays in the fuse box can fail; the Fit's fuse box is located on the side under the steering wheel, making it easy to inspect. Safety tip: if the car doesn't start, don't keep trying forcefully as it can damage the electrical circuits. During maintenance at the 4S shop, have them check the ignition coils and fuel lines, and keep the fuel tank more than half full to minimize issues. Always pay attention to unusual starting sounds—preemptive maintenance is key to avoiding trouble.

Was this review help?
4
2
Share
Expand All
LeAnnie
11/05/2025, 02:58 AM

It's really frustrating when the car won't start. There are several common reasons for this issue in the Honda Fit: A dead battery is the most frequent culprit - if the lights are dim, don't even bother trying. Ignition system failures like worn spark plugs or damaged ignition coils can also be the cause. Fuel-related problems such as an empty tank or faulty fuel pump are common too. If the starter or relay malfunctions, you won't hear any sound when attempting to start. Once when my car failed to start, I found corroded battery terminals - cleaning them solved the problem. The Fit's battery is easy to replace, located at the front side of the engine compartment. I recommend beginners keep an emergency jump starter handy, and avoid repeatedly turning the key to prevent damage. Safety first - always park in a safe spot without blocking traffic. Regular maintenance is key to prevention.

Was this review help?
5
3
Share
Expand All
SilasAnn
12/26/2025, 04:46 AM

As a first-time car buyer, I once had trouble starting my newly purchased used Fit. A friend taught me to check the battery voltage and recharge or replace it if it's low. It could also be a faulty starter relay in the fuse box, which for the Fit is located under the steering wheel on the lower left side. Fuel system issues like a faulty fuel level sensor can also cause this—I once had a situation where the gauge showed fuel but the car wouldn't start, and it turned out the fuel pump needed replacement. A broken temperature sensor can make cold starts difficult, a common issue with the Fit in winter. It's advisable to learn how to use simple tools to check fuses and battery terminals. Always keep a portable jump starter in the car for emergencies, as safe driving relies on careful maintenance.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

How to set up the steering wheel buttons of Trumpchi GS5?

The method to set up the steering wheel buttons of Trumpchi GS5: The integrated function buttons on the left side of the steering wheel are mainly used to control the vehicle's audio system, while the buttons on the right side are primarily for controlling the cruise control. In the top-end model, which is equipped with ACC adaptive cruise control, the right side of the steering wheel can also control the ACC. The dimensions of the Trumpchi GS5 are 4695mm in length, 1885mm in width, and 1700mm in height, with a wheelbase of 2710mm. In terms of power, the Trumpchi GS5 is equipped with a 1.5-liter inline 4-cylinder turbocharged engine, available in high-power and low-power tuning options, paired with either a 6-speed manual or a 6-speed automatic transmission. The low-power version has a maximum power of 112 kW and a maximum torque of 235 Nm, while the high-power version has a maximum power of 124 kW and a maximum torque of 265 Nm.
15
2
Share

What are the reasons for the restricted reversing assist system in the BMW 325Li?

BMW 325Li reversing assist system restricted reasons are as follows: Camera obstruction: At night, it may cause the camera's view to be blocked, resulting in a "Driving Assist System Restricted" warning. If it's also raining, this situation is more likely to occur. Installing a hidden dashcam, especially a low-end model, may block the light-sensitive camera on the interior rearview mirror. Some installers may also forget to remove the sensor housing inside, leading to this issue. Additionally, a dashcam malfunction or battery drain may trigger the warning. Applying window film or a car wrap may also obstruct the camera's view, causing the warning. The solution is to replace the camera with a new one. Radar abnormality: The radar may be blocked by foreign objects like tree branches, or a license plate frame may obstruct the radar sensor circuit. Deformation of the radar mounting position or a loose radar requires recalibration. The solution is to recalibrate and reinstall the radar.
9
1
Share

Under what circumstances does a driver's license need to be re-learned?

Driver's license needs to be re-learned if it is revoked or canceled. The following situations will result in the revocation of a driver's license: 1. Driving an illegally modified vehicle or a vehicle that has been scrapped. 2. Being penalized more than twice within one year for drunk driving. 3. Driving at a speed exceeding 50% of the prescribed speed limit. 4. If a vehicle is lent to an unlicensed person (or someone whose driver's license has been revoked) and an accident occurs, not only will the driver be penalized, but the owner will also bear related responsibilities, and the driver's license will be revoked. Moreover, one must wait for two years before applying for a new license. 5. Lifetime driving ban for causing a major traffic accident while driving under the influence of alcohol or drunk driving, or fleeing after causing a major traffic accident. 6. Violating traffic regulations and causing a major traffic accident that constitutes a crime will result in the revocation of the driver's license. 7. Not displaying the vehicle license plate or using an expired temporary license plate.
14
2
Share

Can a newly purchased car be transferred the next day?

After completing the purchase procedures for a new car, it can be transferred the next day without any time restrictions. Here are some considerations for car transfer: 1. Check the certificate: Inspect the embossed number, engine number, and registration date on the certificate, and also check for any signs of alteration. 2. Check the original tax receipt: Be sure to check the original tax receipt for the vehicle purchase tax. Some cars may not have paid the purchase tax previously, and these unpaid or tax-exempt vehicles will be required to pay the purchase tax after the transfer. 3. Ensure complete documentation: The insurance transfer should be completed promptly along with the used car transfer procedures. 4. Understand the vehicle's condition: Vehicles that are mortgaged or under supervision are prohibited from being traded. Vehicle information can be checked through the vehicle management office.
5
3
Share

What is the correct parking sequence for one-button start?

The correct parking sequence for one-button start: 1. Press the brake pedal to bring the vehicle to a smooth stop, keeping the brake pedal depressed throughout the parking process; 2. Shift the gear to N (Neutral) and engage the handbrake; 3. Shift the gear to P (Park); 4. Release the foot brake and press the one-button start key to turn off the power, completing the parking process. The starting sequence for one-button start: 1. After sitting in the driver's seat, press the one-button start once to activate the ACC light, then press it again for vehicle self-check; 2. Depress the brake pedal and press the one-button start key to ignite and start the engine; 3. Keep the brake pedal depressed, shift to D (Drive), and release the handbrake; 4. Gradually release the foot brake, apply some throttle, and the starting process is complete.
18
2
Share

What is the minimum required net width and clearance height for a fire lane?

4.0 meters. Below are relevant details: 1. Fire Lane: A fire lane refers to a road designated for fire truck passage during emergencies. Regulations stipulate that the net width and clearance height of a fire lane must not be less than 4.0 meters, and parking is prohibited on fire lanes to prevent obstruction during fire incidents. 2. Design Requirements for Fire Lanes: (1) The net width and clearance height of a fire lane must not be less than 4.0 meters, and the slope of any open space designated for fire truck parking should not exceed 3%. (2) Circular fire lanes should have at least two connections with other lanes. (3) Dead-end fire lanes must include a turnaround or a turning area, with the turning area's size being no less than 12m x 12m. For high-rise buildings, it should preferably not be less than 15m x 15m; for large fire trucks, the turning area should not be less than 18m x 18m. (4) Any pipelines or concealed trenches on the fire lane must be capable of withstanding the pressure exerted by large fire trucks.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.