What are the reasons why the dash cam cannot record?

Can You Shift Directly from Third Gear to First Gear?

You cannot shift directly from third gear to first gear. Below is a detailed introduction to gear speeds: 1. Gears: Start in first gear, shift to second gear after traveling a few meters, shift to third gear when the speed reaches above 20 mph but below 35 mph, shift to fourth gear when the speed reaches above 35 mph but below 45 mph, and shift to fifth gear when the speed exceeds 45 mph. 2. Precautions: When shifting gears, the clutch and throttle must be coordinated properly. Press the clutch pedal fully while simultaneously releasing the throttle pedal, then quickly shift to the corresponding gear. After shifting, release your hand immediately and avoid keeping it on the gear lever for too long, as this can easily damage the gear lever.

11

5

Share

What is an Intelligent Parking System?

An intelligent automatic parking assistance system refers to a vehicle equipped with sensors, cameras, or radars on its body. These devices emit signals or detect surrounding obstacles to determine their distance and position, thereby identifying the location of nearby parked vehicles. Through algorithms, it achieves a series of automated functions such as quick parking, reverse vehicle locating, and fast payment. Below is an introduction to the automatic parking system: 1. Definition: The Electronic Control Unit (ECU) performs real-time environmental modeling based on sensor information, generates the vehicle's movement path, and controls the vehicle to automatically move into the parking space without collision. 2. Usage Method: The automatic parking system, also known as the parking assistance system, features several radar probes on the vehicle's sides that are not commonly seen in other models. These radar probes use ultrasonic sensors to scan both sides of the road, automatically finding a suitable parking spot by comparing the parking space with the vehicle's length. Once an appropriate spot is found, the driver only needs to shift into reverse gear and control the speed using the brake. The vehicle will then automatically adjust its steering to park itself. When it detects that the space between obstacles in front and behind the vehicle exceeds 1.5 meters, it can easily perform automatic parking without any manual adjustment. The minimum required front and rear spacing for its operation is 40 cm, which is also the minimum spacing generally required for manual parking.

3

Share

Where to Add Windshield Washer Fluid in a Focus?

Open the front hood of the engine, and you will find a windshield washer fluid filler port located at the front-left side of the vehicle. Simply add the fluid directly. When refilling, using a mixture of washer fluid and water can help prevent the solution from freezing in cold weather while improving cleaning performance. Below are the three main types of windshield washer fluids commonly available on the market: 1. Summer-use formula, which contains additional insect-removing agents to quickly eliminate insect residues on the windshield and effectively clean bug splatters on the front fascia. 2. Winter-use antifreeze formula, designed to remain liquid even at temperatures below -20°C, preventing damage to vehicle components. During cold winter conditions when windshield cleaning is necessary, this fluid not only cleans effectively but also helps dissipate static electricity, offering multiple benefits. 3. Special antifreeze formula, guaranteed not to freeze even at -40°C, making it suitable for extreme cold regions in the northernmost parts of the country.

9

4

Share

Where is the OBD interface of Peugeot 408 located?

The OBD interface of Peugeot 408 is located under the steering wheel, inside the cover panel near the left knee. Here is some relevant information: 1. OBD full name: On-Board-Diagnostics, translated into Chinese as: On-board self-diagnosis system. "OBD-Ⅱ" is the abbreviation of "on-Board-Diagnostics-Ⅱ", which means Type II on-board diagnostic system. In order to standardize the diagnosis of vehicle emissions and drivability-related faults, starting from 1996, all new cars sold in the United States must have similar diagnostic instruments, fault codes, and repair procedures, that is, comply with the OBD-Ⅱ program regulations. With the increasing globalization of the economy and the internationalization of automobiles, as the basis for drivability and emission diagnosis, the OBD-Ⅱ system will be implemented and applied more and more widely. 2. As a system for monitoring exhaust emissions, OBD has gradually expanded its control scope in later development. With the improvement of various sensors and the degree of electronicization of vehicles, OBD has incorporated various monitoring functions into its jurisdiction. Nowadays, when talking about OBD, the term OBD interface is generally used, because only the transmission interface of this system can be seen on the vehicle, but behind it is actually the entire vehicle control system.

12

4

Share

What is the maximum allowable weight for a 2-axle vehicle on highways?

Generally, it is acceptable as long as it does not exceed 20 tons, and this standard is currently strictly enforced. Below is an introduction about 2-axle vehicles: 1. Currently, many 2-axle vehicles have very limited registered load capacities specified on their vehicle licenses, with some even as low as 1 ton or 1.5 tons. This often significantly differs from their actual loading capacity. 2. In 2018, the Provincial Overload Control Office issued a document requiring all law enforcement departments in the province to recognize that 2-axle motor vehicles transporting heavy goods (excluding live livestock, fresh meat, eggs, dairy, agricultural by-products, daily necessities, fresh vegetables, fruits, and live aquatic products) must not exceed the originally registered geometric dimensions of their cargo compartments. Additionally, the total weight of the vehicle and cargo must not exceed 20 tons. Any weight over 20 tons is considered overloaded. This change addresses the previous issue where the registered load capacity was too low, making it difficult for vehicle owners to comply.

12

2

Share

What is the best position to add engine oil in a car?

Generally, the engine oil level should be maintained between the minimum and maximum marks on the dipstick. The specific steps to check the oil level are as follows: 1. Locate the dipstick handle in the engine compartment and prepare a piece of tissue. 2. Pull out the dipstick, use the tissue to wipe the dipstick head clean, and observe the scale marks on the dipstick (usually the lower and upper limits). 3. Reinsert the cleaned dipstick, then pull it out again. This time, observe the oil adhering to the end of the dipstick. 4. By examining the oil on the dipstick, you can determine the highest oil level in the engine. If the oil level is between the lower and upper limits, this is the optimal position, indicating the most appropriate amount of oil in the engine.

2

0

Share

What are the reasons why the dash cam cannot record?

Can You Shift Directly from Third Gear to First Gear?

What is an Intelligent Parking System?

Where to Add Windshield Washer Fluid in a Focus?

Where is the OBD interface of Peugeot 408 located?

What is the maximum allowable weight for a 2-axle vehicle on highways?

What is the best position to add engine oil in a car?

Should I wear glasses in the C1 license renewal photo?

What is the reason for the abnormal noise in the Geely Xingrui fuel tank?

Why Deflate Tires When Driving into the Desert?

Are New Energy Vehicles Afraid of Water Wading?