What are the reasons why the CS75 won't start?

1 Answers
LaRowan
07/29/25 2:40pm
Changan CS75 won't start for the following reasons: 1. Battery rust or battery leakage. 2. Engine spark plugs are damp. Solutions for Changan CS75 not starting are as follows: 1. Check if the battery fluid level is sufficient. The normal level is between the upper and lower two lines. Also, check the fluid level difference in each cell. If the level is insufficient, unscrew the battery cap and add distilled water to reach the proper level. 2. Inspect the battery terminals. Use a wire brush to remove accumulated dirt on the terminals. If the terminal clamps are severely dirty, use sandpaper to scrub along the inner wall to remove the dirt. 3. If the spark plugs are damp, remove them and use a lighter to dry them, allowing the moisture to evaporate quickly.
Was this review help?
2
1
Share
More Forum Discussions

Which is Larger: Small or Compact SUVs?

Compact SUVs are larger. The differences between the two are as follows: 1. Space Difference: Small SUVs generally have a length between 3850-4350mm, with a wheelbase of less than 2670mm. Compact SUVs typically measure between 4300-4750mm in length, with a wheelbase ranging from 2600-2760mm. 2. Performance Difference: The off-road capability of small SUVs is generally not on the same level as that of compact SUVs. Even small SUVs equipped with four-wheel drive systems have significantly different actual off-road performance compared to compact SUVs. In small SUVs, the four-wheel drive system primarily serves to enhance driving performance under special weather or road conditions, lacking the powerful dynamics and driving feel of compact SUVs.
3
1
Share

Where to Check the Tire Pressure Monitoring in the Elantra?

The Elantra's tire pressure monitoring system can be displayed on the central screen of the instrument panel. More introductions about the Elantra are as follows: 1. Introduction: Beijing Hyundai offers the Elantra two direct injection engines that are unique among its peers: a 1.6L naturally aspirated engine and a 1.4T turbocharged engine. Among them, the 1.6L direct injection engine is the only naturally aspirated engine in its class equipped with direct injection technology, leading its peers with a maximum output power of 95.3Kw, matched with a peak torque of 157N·m. The 0-100Km/h acceleration time is only 10.8 seconds, and the top speed can reach 204Km/h. 2. Features: The Elantra is equipped with an AEB (Automatic Emergency Braking) system that leads its class. By judging the relative speed and size of obstacles in front of the vehicle, the automatic emergency braking system can effectively predict whether a collision will occur and achieve automatic braking in emergency situations.
13
1
Share

What is the fuel consumption of the Mercedes-Benz B-Class?

1.3t model has a fuel consumption of 7.1 liters per 100 kilometers, while the 2.0t model consumes 8.5 liters per 100 kilometers. The Mercedes-Benz B-Class is a compact car under the Mercedes-Benz brand. This model is equipped with three types of engines: a low-power 1.3-liter turbocharged engine, a high-power 1.3-liter turbocharged engine, and a 2.0-liter turbocharged engine. Below is an introduction to the Mercedes-Benz B-Class: 1. Exterior: The redesigned front bumper, wide and bold three-bar grille, and the robust yet elegant hood set the tone for the dynamic design style of the Mercedes-Benz B-Class. 2. Interior: High-quality materials, attention to detail, and spacious cabin space have always been the goals Mercedes-Benz strives for. The premium color schemes and materials, the fine tactile sensation of the interior, and the brightness brought by the large glass areas are all outstanding features of the Mercedes-Benz B-Class. The higher seating position provides drivers with better visibility and a comfortable driving posture, while the width and support of the seats offer inherent safety for spirited driving.
16
2
Share

What car is represented by the letter V?

It is the domestically produced Changan with a military-industrial background. Changan Automobile is one of the four major automotive group enterprises in China, boasting a 155-year history and 34 years of car manufacturing experience. It operates 19 production bases and 36 vehicle and engine factories worldwide, with a presence in 10 key overseas markets. From January to July 2017, Changan sold a cumulative total of 1.591 million vehicles, ranking fourth in China's automotive industry. Relevant details are as follows: 1. Diverse Vehicle Lineup: Changan Automobile has developed a comprehensive product spectrum covering micro vehicles, sedans, buses, trucks, SUVs, and MPVs, ranging from entry-level to premium models. It offers engine platforms with displacements from 0.8L to 2.5L. In 2009, Changan's self-owned brand ranked 13th globally and first in China, becoming one of the most valuable brands in the Chinese automotive industry. 2. Development of New Energy: Changan Automobile focuses on energy-saving and new energy vehicles. China's first hydrogen internal combustion engine was successfully ignited at Changan, and the country's first mass-produced hybrid car, the Jiexun, rolled off the production line and entered the market, becoming the only demonstration vehicle for the State Council's Government Offices Administration.
9
2
Share

How often should the spark plugs be replaced in a Nissan Qashqai?

It is recommended to consider replacing the spark plugs in a Nissan Qashqai after driving more than 40,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order and secure the cover.
5
0
Share

Why is the tire pressure low on rainy days?

Reasons for low tire pressure on rainy days: If the tire is damaged or the valve seal is not tight, causing air leakage, it will lead to a decrease in tire pressure; If the tire rim is deformed, it will affect the sealing performance, resulting in lower tire pressure; If the vehicle frequently exceeds the specified load weight, the rear tires will experience different forces compared to the front tires. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; Increased body vibration indirectly affects the lifespan of other components; It causes excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the vehicle during driving; Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and the impact may cause internal cracks or blowouts, leading to a tire burst. Hazards of insufficient tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption; It makes the steering wheel heavy and prone to deviation, creating unsafe driving conditions; It increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; It reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction between the rim and the tire, causing damage to the bead area and abnormal wear; The friction between the tire and the ground multiplies, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may cause a tire burst; It increases tire body deformation, making the sidewalls prone to cracks and causing flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.