···
Log in / Register

What are the reasons why the Changan CS75 won't start?

4 Answers
LiamLee
09/04/25 3:29am
The reasons why the Changan CS75 won't start may include: rust or leakage in the battery, or moisture in the engine spark plugs on rainy days. Below are the maintenance methods: 1. Check whether the battery fluid in the battery is sufficient. If the liquid level is between the upper and lower two lines, it is considered appropriate. Also, check the liquid level difference in each slot. If the liquid level is insufficient, unscrew the cover on the battery and pour in distilled water to replenish the liquid level. 2. Check the battery terminals and use an iron brush to remove accumulated dirt on the terminals. If the terminal clamps are severely soiled, use sandpaper to rub along the inner wall to remove the dirt. 3. If the spark plugs are damp, remove them and use a lighter to bake them to quickly evaporate the moisture on them.
Was this review help?
12
4
Share
AdrianLynn
09/16/25 4:40am
I've repaired quite a few Changan CS75 vehicles before, and the most common issue causing failure to start is battery-related problems. Either the battery has aged or is depleted, possibly due to leaving headlights on or long-term disuse causing power leakage, especially prone in winter. Next is starting system failure, such as a burnt starter or faulty relay, with symptoms being only a clicking sound when turning the key but the engine doesn't crank. Ignition system issues like spark plug carbon buildup or weak ignition coils can also cause difficulty in starting. Fuel system-wise, a broken fuel pump or clogged fuel line cutting off fuel supply will prevent the engine from starting. A failed crankshaft position sensor means the ECU doesn't receive signals and won't allow startup. Occasionally, the electronic control unit (ECU) might malfunction and cause issues too. When troubleshooting, first try jump-starting; if that doesn't work, check the fuses. Regular maintenance is key—inspecting the battery and fuel system every six months can prevent problems before they occur. Don't wait until you're stranded on the road to panic.
Was this review help?
11
3
Share
Expand All
AdrianaDella
10/30/25 5:14am
I've been driving a Changan CS75 for several years. Once during a trip, the car suddenly wouldn't start, which was quite a scare. The possible reason was insufficient battery in the remote key, and replacing the battery solved the issue. Battery aging is a significant problem, especially in cold weather when it's prone to failure—checking the voltage can tell. If there's a cranking sound but the engine doesn't start, it's likely a starter or relay issue. Fuel-wise, an empty tank shown on the gauge or a faulty fuel pump are common culprits, so remember to check if the fuel line is clear. Sensor issues like a faulty idle control valve can also have an impact. As a temporary solution, carrying an emergency jump starter is wise. Always turn off all electrical devices before shutting down the engine to save power—developing good habits can save a lot of trouble. Regular maintenance can greatly reduce such embarrassing situations.
Was this review help?
16
4
Share
Expand All
EvangelineLynn
12/13/25 5:22am
Speaking of the Changan CS75's failure to start, I've analyzed quite a few cases. The main causes are often a depleted battery or one that's reached the end of its lifespan—jump-starting can provide a temporary fix. When the starter motor fails, the engine makes noise but doesn't turn over, and a damaged relay can also be a trigger. A faulty fuel pump can cut off fuel supply, or a clogged filter may starve the engine of fuel during ignition. A failed crankshaft sensor can mislead the computer into preventing startup, and humid conditions can exacerbate the issue. It's advisable to keep some tools in the car for self-inspection, like listening to the startup sound for clues, and ensuring the key is firmly inserted. Regularly monitor the battery's condition and avoid unauthorized circuit modifications to stay safe.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

Where can I check the results of Subject 2?

After completing Subject 2, you can check your results through the driving school, your instructor, or by logging into the Traffic Safety Comprehensive Service Platform or the Traffic Management 12123 app. Below are the detailed methods: Call the driving school: After the Subject 2 exam, a computer voice will announce the test results. If you didn’t hear it clearly, you can call the driving school to inquire about your score. Consult your instructor: After the results are released, the instructor will receive the students' scores. You can meet with or call your instructor to check whether you passed. Online inquiry: Use a computer to access the Traffic Safety Comprehensive Service Platform of the Ministry of Public Security. On the homepage, select your region and find the personal login page. The username for login is your ID number, and the password can be accessed via a mobile verification code. After logging in, click "My Homepage" and then "Student Information" to view your exam details, including the scores for each subject. The results will be uploaded the next day. Traffic Management 12123 inquiry: On the 12123 homepage, click "More," then select "Exam Reservation." If you can reserve a test for the subject, it means you didn’t pass. If it shows "Exam Passed," no reservation is needed. Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test. For small cars (C1, C2), the test includes five mandatory items: reverse parking, parallel parking, hill start, right-angle turn, and S-curve driving (some regions may include a sixth item: highway card collection). For large vehicles (A1, A2, A3, B1, B2), the test includes more items such as pole test, hill start, parallel parking, single-plank bridge, S-curve, right-angle turn, narrow gate, continuous obstacles, bumpy road, U-turn in a narrow lane, and simulations for highways, mountain roads, tunnels, rain/fog, slippery roads, and emergency handling. Driver's license exam passing standards: • Traffic laws and knowledge (Subject 1): Written test, 100 points total, 90 or above to pass. • Field driving (Subject 2): Practical test, pass/fail only. The five mandatory items are tested in sequence. 100 points total, 80 or above to pass (90 or above for large vehicles). • Road driving (Subject 3): Practical test on roads or simulated environments, 100 points total, 90 or above to pass. • Safe and civilized driving knowledge (Subject 4): Written test, 100 points total, 90 or above to pass.
2
1
Share

What is the reason for the Q5 not starting?

q5 can not start the main reason is the vehicle ignition system problems. The following is the relevant introduction: 1. Engine carbon deposits: The vehicle's engine internal carbon deposits are too serious, which makes the vehicle difficult to start, causing idle speed jitter. 2. Ignition system problem: The vehicle's ignition system has a problem, need to check the vehicle's spark plugs and high-voltage wires, the ignition system's working state is not normal operation, will lead to this situation, and cause the vehicle idle speed jitter or difficult to start. 3. Insufficient cylinder pressure: The failure caused by insufficient engine cylinder pressure, because of the time problem, the vehicle's engine has exceeded the service life of the engine, can not continue to work, and the problem of intermittent idle speed jitter appears, this situation needs timely maintenance.
3
5
Share

What does the vscoff warning light indicate?

vscoff light indicates that the vehicle stability control system is turned off. The light will illuminate if the stability control switch is accidentally turned off or if there is a malfunction in the system. Below is additional information: 1. The vehicle stability control system is designed to enhance driving performance. If you experience delayed acceleration response, poor acceleration, or unstable engine idle, it may indicate an issue with the electronic control system, and you should promptly visit a 4S shop for inspection and repair. 2. The Electronic Stability Program (ESP) is a general term for systems or programs aimed at improving vehicle handling while effectively preventing loss of control when the vehicle reaches its dynamic limits. ESP enhances both safety and handling. 3. The Vehicle Stability Control (VSC) system is an active safety feature that significantly improves vehicle handling safety and driving convenience. In emergency situations such as sharp turns, sudden acceleration, or hard braking, the system can quickly respond by applying appropriate braking measures, such as controlling each tire individually and reducing engine output to maintain vehicle stability.
14
2
Share

Why Did the Dashboard Suddenly Go Black While Driving Normally?

The reason why the dashboard suddenly goes black while driving normally may be that the vibration of the vehicle caused the wiring of the dashboard lights to become loose. Below is some relevant information about the car dashboard: 1. Definition of the car dashboard: The car dashboard is a device that reflects the working conditions of various systems of the vehicle. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Composition of the car dashboard: Common components include door alerts, handbrake alerts, seatbelt alerts, engine self-check, lubrication oil condition check, ABS system check, airbag check, battery alert, and fuel level alert. Additionally, there are the lighting systems, including turn signals, high and low beams, front and rear fog lights, and width indicator lights.
6
5
Share

What are the reasons for the high water temperature in Jiangling Yusheng?

Jiangling Yusheng high water temperature reasons are as follows: 1. Cooling system: Cooling system leakage leads to insufficient coolant. 2. Cooling fan: The cooling fan is stuck or damaged and cannot perform its cooling function. 3. High-speed driving: Prolonged high-speed driving can easily cause the water temperature to rise. 4. Others: Fan belt breakage, radiator or water pipe leakage, thermostat failure, oil leakage, water pump failure, etc. The hazards of excessively high water temperature are as follows: The normal engine water temperature is between 85-95 degrees Celsius. When the water temperature is too high, the viscosity of the oil will become thinner, reducing lubrication performance. High-speed moving parts such as pistons and valves are prone to deformation, causing the engine to lose power. In severe cases, it can lead to cylinder scuffing and crankshaft seizure, requiring a major engine overhaul.
2
1
Share

What Causes the EPC Light to Illuminate and the Throttle Pedal to Become Unresponsive?

Possible causes include a malfunctioning brake light switch and rear brake bulbs, fuel quality issues, or a dirty throttle body. Related explanations: 1. EPC: EPC stands for Electronic Power Control, and a constantly illuminated EPC indicator signifies a fault in the engine or electronic systems. 2. Fuel quality: Poor fuel quality can lead to reduced power output, noticeable vibrations and abnormal noises at idle, and long-term use may cause carbon buildup, resulting in a dirty throttle body and increased fuel consumption. 3. Throttle body carbon deposits: When carbon deposits form on the throttle body, a portion of the fuel injected into the cylinder is absorbed, diluting the actual air-fuel mixture entering the cylinder. This can cause poor engine performance, manifesting as difficult starts, unstable idle, poor acceleration, backfiring under sudden acceleration, excessive exhaust emissions, increased fuel consumption, and other abnormal phenomena.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.