What are the reasons why the car wiper cannot move?

Does BMW's turn signal automatically reset?

BMW's turn signal will automatically turn off as the steering wheel returns to the center position. Automatic reset of turn signals: Both operational states of the turn signal are electronically controlled. When the driver operates the turn signal switch, the system determines the driver's intention based on the position of the lever and issues commands for either lane change flashing or regular flashing. In the regular flashing state, the system monitors the steering wheel angle to detect the driver's steering return action, thereby issuing a command to turn off the turn signal. Reset lever and steering wheel: When the reset lever or the raised surface of the reset disc becomes significantly worn, the reset lever and reset disc can no longer "interfere" with each other. As a result, after the vehicle completes a turn, the turn signal cannot automatically reset during the steering wheel's return to center process.

1

Share

Where is the towing hook located on the Fabia?

The towing hook of the Fabia is located in the trunk area. The towing hook screws onto a small module, and it should be installed by turning it clockwise. Instructions for using a car towing hook: Locate the towing hook positions at the rear of the towing vehicle and the front of the towed vehicle. The towing hook positions are designed under the bumper. By inspecting the front and rear bumpers, you can find a concealed space covered by a round or square cap—this is where the car's towing hook is located. Function of a car towing hook: The towing hook serves the purpose of towing vehicles, but not all vehicles are eligible for towing hook installation. Only models that meet specific regulations can have a towing hook installed. Additionally, the towing hook must not protrude beyond the vehicle's body when installed; otherwise, installation is not permitted.

17

0

Share

How to Reset the Oil Display on the 10th Generation Civic?

Introduction to the method for resetting the Civic oil display: First, turn the Civic's power to ON mode, then repeatedly press the (Display/Info) button until "Maintenance" appears on the screen. Press the Enter button, and the engine oil monitor will appear on the display. Finally, hold the Enter button for about 10 seconds, and the Civic oil wrench symbol will be reset. Below is related content: 1. If the oil has reached the end of its service life, it should be replaced immediately. If the display does not reset after the oil has been changed, a manual reset is required—hold the reset button while the engine is off, then turn on the power. If this doesn't work, there may be an issue with the instrument panel or the vehicle's computer. 2. The oil change reminder helps owners identify and resolve issues promptly. Many modern cars include this feature to alert owners. Engine oil is an essential component of a vehicle. Typically, oil lubricates the engine, improving its efficiency and overall performance.

4

0

Share

Why Did Baojun 730 Stop Production?

Baojun 730 stopped production primarily because the product itself failed to attract potential consumers. Competitor factors: Originally, the Baojun brand, which lacked brand advantages, held a unique positioning and product edge in third-, fourth-, and fifth-tier cities. It dominated this market segment with three major strengths: spacious interiors, low prices, and a dense sales network. However, after 2018, consumers developed a new round of car selection preferences, prioritizing higher quality and brand reputation. Product factors: Models like the Jetour X70, which offer superior safety, handling quality, spacious interiors, features, and powertrain advantages, proved far more appealing to consumers than the Baojun 730. The price gap between these two models has narrowed to the cost of a smartphone, making the Baojun 730 no longer the sole choice for this consumer segment.

11

0

Share

What Causes the Noise from the Top Rubber of Mercedes-Benz Shock Absorbers?

If there is abnormal noise from the top rubber of the front shock absorber in a car, it is necessary to consider replacing the top rubber of the front shock absorber. The function of car shock absorbers: Shock absorbers are used to suppress the oscillation after the spring absorbs shocks and the impact from the road surface. They are widely used in automobiles to accelerate the attenuation of vibrations in the frame and body, thereby improving the smoothness of the vehicle's ride. When driving on uneven roads, although the shock-absorbing springs can filter out road vibrations, the springs themselves still have reciprocating motion, and the shock absorbers are used to suppress this spring bouncing. Replacement of the top rubber of the shock absorber: Before replacement, park the car on a flat surface and prepare new top rubber, a jack, and soapy water, which can also be replaced with water diluted with dishwashing liquid; then, use the jack to lift the part of the car body that needs to be replaced, stretching the spring for easier replacement.

12

3

Share

How to Set the Lock Horn for Lavida?

Lavida lock horn setting method: To set the lock horn for Lavida, first press the brake pedal of the Lavida, place the gear shift lever in P position, then release the brake pedal, press the one-button start key of SAIC Lavida twice consecutively, close all four doors, and hold down the lock button on the driver's door for more than 10 seconds to complete the lock horn setting. Information about car horns is as follows: 1. The horn is the sound signal device of the car, whose function is to warn pedestrians and attract the attention of other vehicles to ensure traffic safety, and it is also used to urge movement and transmit signals. 2. How the horn works: When the horn button on the steering wheel or other positions is pressed, the current from the battery flows through the circuit to the electromagnetic coil of the horn relay, the electromagnetic coil attracts the moving contact switch of the relay to close, and the current then flows to the horn. The current causes the electromagnet inside the horn to work, which then causes the diaphragm to vibrate and produce sound.

16

4

Share

What are the reasons why the car wiper cannot move?

Does BMW's turn signal automatically reset?

Where is the towing hook located on the Fabia?

How to Reset the Oil Display on the 10th Generation Civic?

Why Did Baojun 730 Stop Production?

What Causes the Noise from the Top Rubber of Mercedes-Benz Shock Absorbers?

How to Set the Lock Horn for Lavida?

What is the size of the tire bolts for the Nissan Sunny?

Where is the fuel pump fuse located in a BMW 320?

What is the weight of the BMW S1000RR?

What is the maximum speed of the Jetta?