···
Log in / Register

What are the reasons why the car trunk cannot be opened?

4 Answers
AngelinaMarie
08/29/25 4:48am

Reasons why the car trunk cannot be opened: 1. Problems with the linkage rod or lock cylinder; 2. The lock cylinder is dirty or rusty; 3. The trunk lock is frozen or stuck; 4. The trunk switch is malfunctioning. Most car models have a small slot inside the trunk. You can use a key or other sharp object to pry open the outer cover. Once the cover is removed, you can see the rear trunk locking mechanism inside. Just pull it slightly with your hand to easily open the trunk. The car trunk is the place where spare items are stored and goods are loaded. Since small cars can be divided into hatchbacks and sedans, the size of the trunk also varies.

Was this review help?
16
3
Share
OPiper
09/11/25 2:36am

A couple of days ago, my car's trunk just wouldn't open no matter what, which was really frustrating. It turned out the lock cylinder was rusted shut, but a quick spray of lubricant fixed it. Sometimes, if the key isn't inserted properly or the battery is old, the mechanical parts can become unresponsive. Debris buildup inside the trunk lid or a loose cable can also cause it to jam, requiring the interior panel to be removed for inspection. In cold weather, locks are more prone to freezing—a few gentle taps might help before trying again. Worn or deformed trunk latch mechanisms are common issues, especially in older cars; regular cleaning of the lock groove can prevent this. If the manual key won't turn at all, you might need to replace the entire lock assembly, a DIY job costing just a few dozen bucks. Also, don't forget to check if the trunk release switch is functioning properly—small details matter.

Was this review help?
14
3
Share
Expand All
SanKeegan
10/25/25 3:24am

I often tinker with automotive electronic components, and trunk failure to open is usually due to remote control system malfunctions. For example, weak signals from a depleted key fob battery can be resolved by replacing it with a new one. If replacement doesn't work, it might be a short circuit or poor connection in the body control module or trunk sensor wiring—check the current pathway with a multimeter. In summer heat, circuit boards are prone to overheat protection; wait for the car to cool down before retrying. Most vehicles have an interior manual trunk release lever as an emergency workaround. Electronic locks are also susceptible to software glitches—try resetting the car's computer by disconnecting power for five minutes. Don't rush to a technician; DIY testing saves time.

Was this review help?
8
4
Share
Expand All
OBrianna
12/08/25 3:48am

There are many reasons why the trunk won't open, with mechanical jams being the most common—the lock may be rusted or broken. Electronic issues like a dead key fob or sensor malfunctions are also frequent. Objects blocking the latch inside the car often occur as well. First, try manually unlocking it; if that doesn't work, check the fuse box, as sometimes the circuit is protected by a blown fuse. Regular cleaning of the trunk groove to prevent debris from getting stuck can help avoid such issues.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

How many points will be deducted and how much will be fined for not wearing a seat belt in the passenger seat?

Not wearing a seat belt in the passenger seat will result in a deduction of 1 point. Here is the relevant information: Precautions: The passenger seat is also the most dangerous seat in the entire car, so nowadays, cars will automatically sound an alarm if the passenger does not wear a seat belt. For the safety of yourself and others, it is essential to develop the good habit of wearing a seat belt. Regulations: According to the Road Traffic Safety Law, when a motor vehicle is in motion, passengers in the passenger seat should also use seat belts. The requirement for passengers to wear seat belts has been clearly stipulated in the old traffic regulations. Any passenger not wearing a seat belt in the passenger seat can be fined by the on-duty traffic police.
19
3
Share

Can I switch from manual to automatic transmission during driving test?

It is not possible to change from manual to automatic transmission during the driving test, and the passed subjects cannot be altered. Once the driving license application materials have been accepted by the driving management office, all information is generated and cannot be modified. If you insist on switching from manual to automatic transmission during the driving test, you must cancel the original application and reapply for the driving test, which means all previous test results will be invalidated. Although the automatic transmission test does not assess clutch and gear control, it places higher demands on throttle control. In contrast, the manual transmission test does not focus on throttle control—as long as the clutch is managed well, you can shift from first to second gear using idle speed without pressing the accelerator. However, with an automatic transmission, pressing the accelerator too hard may cause the car to become unstable. You can use the manual mode (M mode), but even then, pressing the accelerator too hard will still trigger an automatic upshift. The main difference between manual and automatic transmission tests lies in the assessment of clutch control versus throttle control, while other aspects are largely similar. Additionally, a C2 license only permits driving automatic transmission vehicles. If you drive a manual transmission car with a C2 license and are caught by traffic police, it will be considered a mismatch with the permitted vehicle type, resulting in fines and demerit points. Moreover, in such cases, insurance companies may refuse to cover any accidents that occur.
9
5
Share

Are the Three Major Components of Santana and Bora the Same?

Santana and Bora are not the same in terms of their three major components. The specific details are as follows: 1. Exterior Design: The new Santana features a slightly higher waistline, which is straight and sharp, giving the car a fuller and more powerful visual effect, with a harmonious overall appearance. The rear design is elegant and dignified, and the interior style is coordinated, exuding a sense of stability and sophistication. In contrast, the new Bora has a lower waistline, with overly prominent creases, making it appear somewhat thin. The irregular shape breaks the original simple and elegant style, forming an inverted trapezoidal cross-section, which disrupts the visual sense of solidity. The round air vents do not match the precise, robust, and simple style of the vehicle. 2. Performance: The new Santana accelerates from 0 to 100 km/h in 10.89 seconds, while the new Bora takes 12.36 seconds, with the former outperforming the latter. 3. Safety: The new Santana has a braking distance of 41.28 meters from 100 to 0 km/h, and higher trim levels include head airbags. The new Bora has a braking distance of 42.79 meters from 100 to 0 km/h and does not come with head airbags as standard, with a maximum option of four airbags. 4. Fuel Economy: According to third-party tests, the new Santana has a fuel consumption of 7.37 liters per 100 kilometers, while the new Bora consumes 8.36 liters per 100 kilometers.
14
3
Share

What brand is armour tires?

armour is a brand of tires produced by Xuzhou Xulun Rubber Co., Ltd. Below is an introduction to the considerations when selecting car tires: Consideration 1: Ensure the tire size matches the vehicle's tire size. The tire size is marked on the sidewall of the tire. Consideration 2: Check if the tire is a retread. New tires have sidewall markings that are integrated with the tire. If the markings appear to be pasted on rather than integrated, it is likely a retread. Consideration 3: Pay attention to whether the production date of the tire has been tampered with. If the production date is unclear, it is advisable not to purchase the tire to avoid buying old stock.
2
4
Share

What to Do with Vehicle Inspection After Car Modification?

If the car modifications have been registered in advance with the vehicle management office, there will be no impact on the inspection process, and you can proceed normally. If not registered in advance, you will need to revert the modifications to match the appearance shown on the vehicle registration certificate. The principle is that the photo on the registration certificate must match the actual vehicle. Required documents for the inspection include the vehicle registration certificate, compulsory traffic accident liability insurance policy, ID card, warning triangle, and fire extinguisher. Note that any traffic violations must be settled before the inspection, and no modifications are allowed on the vehicle body. Vehicle inspection, also known as motor vehicle testing, varies in scope and items based on the vehicle's usage. Main inspection items include safety technical inspection, emission inspection, and comprehensive performance inspection.
3
0
Share

What is the wheelbase of the Dongfeng Nissan Lannia?

The wheelbase of the Dongfeng Nissan Lannia is 2700 mm, with a length, width, and height of 4683 mm, 1780 mm, and 1465 mm respectively. The Dongfeng Nissan Lannia is a compact sedan under the Nissan brand, featuring DIS dual fuel injection technology, dual CVTC continuous variable valve timing intelligent control system, and ISS intelligent start-stop system. The Dongfeng Nissan Lannia is equipped with a 1.6-liter naturally aspirated four-cylinder engine, producing 126 horsepower and a maximum torque of 168 Nm. The maximum power is achieved at 5600 rpm, and the maximum torque is reached at 4000 rpm. It utilizes multi-point electronic fuel injection technology and an aluminum alloy cylinder head and block.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.