···
Log in / Register

What are the reasons why the BYD S6 cannot detect the key?

4 Answers
VanIsaac
07/29/25 5:48am
BYD S6 cannot detect the key for the following reasons: 1. The key is placed in an inconspicuous location, such as inside the trunk, on the car floor, near the rear storage panel, or below the front windshield. Try placing the key in a more visible location. 2. The key battery is low. The remote key typically uses a standard button battery with a rated working voltage of around 3.3V. Under normal circumstances, the battery lifespan can generally last up to 2 years. 3. The use of a key case may weaken or block the signal. 4. There is an issue with the key chip, resulting in poor or no signal transmission. 5. The car's oscillator itself or related faults may prevent the formation of an effective electronic oscillation zone, thereby failing to scan and recognize the key.
Was this review help?
11
3
Share
IsabelleFitz
08/12/25 8:19pm
Last time I used the BYD S6, I also encountered the trouble of the key not being detected. The most common issue is a depleted key battery—back then, even the spare key didn't respond, but replacing the battery fixed it. Sometimes, environmental factors interfere, like parking near a signal tower or in an underground lot where strong interference can cause malfunctions. The key itself can also fail, such as from battery compartment leakage or stuck buttons, so it's important to check for oxidized contacts. A more troublesome issue is aging of the car's receiver module—my mechanic friend mentioned that you'd need a 4S shop to scan for error codes, and sometimes a software update will do the trick. Once, I even forgot the key was in my wallet and got blocked by metal objects; moving it away solved the problem. These issues shouldn't be taken lightly, especially when going out at night—if you get stuck, you might need to call for emergency help. Regularly replacing batteries and avoiding interference sources can prevent 90% of cases. In short, the inspection sequence is simple: first replace the battery, rule out interference, then check the key's integrity, and finally diagnose the car-side issue.
Was this review help?
18
0
Share
Expand All
DeMalia
10/03/25 7:49am
Recently, my BYD S6 frequently fails to detect the key. Initially, I thought the device was broken, but later I figured out that the signal might be interfered with by other electronic devices, such as when using a microwave or mobile phone, especially in areas with many smart home devices where maintaining distance is necessary. Key battery aging is a common issue; I measured the voltage, and if it's below 2V, it should be replaced. However, when replacing it yourself, pay attention to model matching to avoid burning the chip. Loose vehicle receiving antennas or the need to reset the ECU module can also cause problems. I recall that restarting the vehicle's power sometimes helps. Additionally, temperature has a significant impact; key sensitivity decreases in extremely cold or hot environments, so avoid prolonged exposure to sunlight or freezing storage. For prevention, I recommend checking the battery and cleaning the contacts every six months, keeping the car key away from magnetic objects like magnetic-clasp wallets. If the issue occurs frequently, seek professional diagnosis to avoid bigger hazards. Safety first—don't take risks while driving.
Was this review help?
18
0
Share
Expand All
DiCamilla
11/17/25 2:41am
When using the BYD S6, if the key detection fails, it's mostly due to low battery power, and replacing it with a new battery usually solves the issue. If parked in crowded areas or between tall buildings, electromagnetic interference can disrupt the signal—trying to get closer can confirm this. If the internal chip of the key gets wet or is damaged from a fall, recognition may also fail; a light tap test can help diagnose the problem. A fault in the vehicle's antenna system is more complex, possibly caused by damaged cables leading to weak reception. I usually keep two keys on hand and rotate them; if both fail, it might indicate a vehicle-side issue. In emergencies, use the mechanical unlock to start the car. Simple troubleshooting steps include trying different positions first, then checking if the key's indicator light is on—once these basics are handled, you can drive with peace of mind.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Symptoms of a Bad Engine Mount?

Symptoms of a damaged engine mount in a car are as follows: 1. When the engine is idling, if you can feel significant vibration in the steering wheel, it may indicate that one of the engine mounts is damaged. 2. While the engine is idling, shifting into R or D gear, holding the brake for 10 seconds without moving, if the steering wheel shakes or the body vibrates abnormally, the engine and transmission mounts may be damaged. 3. Vibration during acceleration, causing resonance in a specific range, could be a sign of a damaged mount. 4. If there is oil leakage on the surface, it might indicate a damaged hydraulic engine mount.
17
4
Share

How many days after failing Subject 2 can I schedule the next attempt?

After failing Subject 2, you cannot immediately reschedule the test. The applicant needs to first pay the re-examination fee at the vehicle management office and wait for 10 days before retaking the exam. Relevant information about the driver's license examination is as follows: 1. Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: Each subject can be taken once, and those who fail can retake it once. Those who do not participate in the retake or fail the retake will have their current examination terminated. The applicant must reschedule the examination, but for Subject 2 and Subject 3, the rescheduling must be done after 10 days. 2. For those who fail the Subject 3 safe and civilized driving knowledge test, the passed road driving skill test scores remain valid.
3
0
Share

Car Acceleration Shaking?

Car acceleration shaking may be caused by the following reasons: 1. Engine malfunction; 2. Insufficient cylinder pressure; 3. Half-shaft malfunction; 4. Fuel system malfunction; 5. Aging engine components; 6. Ignition system failure. Solutions for car acceleration shaking are as follows: 1. Replace filters: including oil filter, gasoline filter, fuel filter, and air filter. Replacing filters can improve filtration efficiency, reduce impurities, and make engine combustion more complete; 2. Clean carbon deposits: including spark plug carbon deposits, throttle carbon deposits, and cylinder carbon deposits.
6
5
Share

Audi A6L experiences jerking when shifting into reverse gear?

Audi A6L jerking when shifting into reverse gear: The automatic transmission may have a malfunction. Solution: It is recommended to visit an authorized 4S dealership for inspection and repair as soon as possible. More information about the Audi A6L is as follows: 1. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. 2. The exterior design of the new-generation Audi A6L shows minimal overall changes, adopting a more innovative and youthful design on the existing foundation, featuring a new family-style front grille that closely resembles the current A8L. 3. The dimensions of the new Audi A6L are 5015mm*1874mm*1455mm (length*width*height), with a wheelbase of 3012mm.
13
5
Share

What does 6MT transmission mean?

It refers to a 6-speed manual transmission. The term MT stands for Manual Transmission, with its full English name being manual-transmission. The number 6 indicates that it has 6 manual forward gears. Manual transmissions are widely used, with 5MT and 6MT being more prevalent. Manual transmission is a gear-shifting device used to alter the speed and torque transmitted from the engine to the driving wheels. It enables the vehicle to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Introduction to Manual Transmission: Modern vehicle engines have limited ranges of speed and torque variation, but driving conditions vary greatly, requiring a wide range of changes in traction force and speed. For instance, when starting, a vehicle doesn't need high speed but requires greater traction force, whereas on highways, less traction force is needed but higher speed is desired. This demand characteristic of vehicles conflicts with the engine's speed-torque characteristics, and the transmission precisely resolves this contradiction. The functions of a manual transmission are: To change the gear ratio, expanding the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions. To enable reverse driving by using the reverse gear while maintaining the engine's rotation direction. To interrupt power transmission with the neutral gear without turning off the engine, facilitating engine start-up, warm-up, idling, gear shifting, coasting, or temporary stops. To transmit the engine's power output to drive other mechanisms, such as winches in some vehicles or oil pumps in dump trucks. Compared to hydraulic automatic transmissions (AT), manual transmissions have both advantages and disadvantages. Advantages: Compared to automatic transmissions, they offer more control pleasure for driving enthusiasts. Higher transmission efficiency than automatic transmissions, resulting in better fuel economy under the same engine displacement. Simpler construction, cheaper maintenance, and greater durability than automatic transmissions. Relatively mature technology and lower manufacturing costs. Higher reliability. Disadvantages: Gear shifting requires simultaneous control of the clutch, gear lever, and throttle, increasing the driver's operational burden, especially for beginners, potentially causing nervousness and affecting driving safety. Inexperienced clutch control can lead to stalling on the road, and improper uphill operation may damage the engine and transmission. Manual transmissions are purely mechanical, so adding gears increases size and weight, limiting the number of gears (currently up to seven speeds, with six speeds being optimal). In contrast, automatic transmissions using planetary gear sets (AT) or steel belts (CVT) can compress size with technological advancements, allowing more gears without increasing volume. Classification and Structure: Manual transmissions consist of gear transmission mechanisms, transmission housing, and control mechanisms. The gear transmission mechanisms can be classified by the number of forward gears or the form of shafts. Based on the number of forward gears, they can be three-speed, four-speed, five-speed, or multi-speed transmissions. Based on shaft forms, they can be fixed-axis (where gear rotation axes are stationary) or rotating-axis (where gear rotation axes also rotate, such as planetary gear transmissions). Fixed-axis manual transmissions can be further divided into two-shaft, intermediate-shaft, double intermediate-shaft, and multi-intermediate-shaft types based on the number of shafts.
5
3
Share

Which is bigger, a subcompact car or a compact car?

Compact cars are larger. Relevant information is as follows: 1. Compact cars, also known as A-segment cars, have a wheelbase between 2500mm and 2700mm, and an engine displacement between 1.6L and 2.0L. Examples of compact cars include: Chevrolet Cruze, Mitsubishi Lancer, Buick Excelle, Hyundai Elantra, Nissan, etc. 2. Subcompact cars refer to A0-segment cars within the A-segment, with a wheelbase between 2200mm and 2300mm, and an engine displacement between 1L and 1.3L. Examples of subcompact cars include: Changan Yuexiang, Toyota Yaris L, Volkswagen Polo, Toyota Vios FS, Wuling Hongguang MINIEV, etc.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.