···
Log in / Register

What are the reasons why the BYD Qin's air conditioner only blows air but does not cool?

2 Answers
Frances
07/29/25 2:04pm
Reasons why the air conditioner only blows air but does not cool: 1. Lack of refrigerant: This leads to insufficient refrigerant in the air conditioning system pipeline, reduced pressure, and decreased heat absorption, resulting in the feeling of only blowing air without cooling. In this case, observe through the sight glass above the dryer. During normal operation of the air conditioner, if there are continuous slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it means the refrigerant is severely insufficient. 2. Excessive refrigerant: There is a required proportion of refrigerant in the air conditioning system. If the proportion is too high, it will affect heat dissipation. Similarly, if too much cooling oil is added during maintenance, it will also reduce the heat dissipation of the refrigeration system. 3. Aging or loose belt: A loose drive belt of the car air conditioning compressor can cause slippage during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced refrigerant delivery, resulting in the air conditioner not cooling.
Was this review help?
13
5
Share
OJaxon
08/13/25 5:52am
Driving my BYD Qin on the road, I found the AC only blows air without cooling, which is really annoying! I've encountered similar situations before, usually due to insufficient refrigerant, especially in older cars where Freon might have leaked, preventing the compressor from starting. Also, first check the AC settings to make sure it's not set to ventilation mode without cooling. If these aren't the issue, it might be a blown fuse—locate the AC section in the fuse box and try replacing it with a new one. In my own car, it was a fuse problem, and everything worked fine after fixing it. Remember, in the summer heat, don't tough it out—quickly find a repair shop to check the cooling system, safety first. Also, pay attention to cleaning the AC filter during regular maintenance to extend its lifespan.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What does the car door button mean?

door button in a car refers to the door. Different positions indicate different meanings, as follows: 1. The door button inside the car on the sunroof is used to open or close the sunroof. 2. On the front panel of the car, it is the interior reading light. Press to unlock the car, and the light turns on; after locking the car, the light turns off. Additional information is as follows: 1. Press the door button, then unlock the car, open the door, sit in the car, and after closing the door, the interior reading light will turn on. 2. Unlock the car, and the light will turn on. After a certain period, without pulling the handle, lock the car, and the light will turn off.
16
0
Share

What are the advantages and disadvantages of aluminum alloy car bodies?

Advantages and disadvantages of aluminum alloy car bodies are: 1. The advantages of aluminum alloy include light weight, strong oxidation resistance, and high plasticity. It can be cold-formed and processed, and slightly deformed frames can be easily restored to their original shape. 2. Aluminum alloy car bodies are more expensive. Compared to steel car bodies, aluminum alloy bodies are more brittle and difficult to repair through sheet metal and painting after collisions, resulting in very high maintenance costs. 3. Due to low hardness and poor wear resistance, parts are more prone to wear and tear. It is not suitable for frequently moving parts. 4. The excessive plasticity of aluminum alloy means it cannot provide better protection for occupants in the event of an accident.
17
1
Share

What is the reason why the Focus does not move when reversing?

Here are the reasons why the Focus does not move when reversing: 1. The gear is not fully engaged: It may be because the gear is not actually engaged, or because the vehicle's handbrake is not released, or because the synchronizer in the transmission is stuck. First, check if the gear is fully engaged. If there are no operational issues, it may need to be inspected. 2. Fault issues: The problem could be due to a leak in the reverse gear oil circuit, a fault in the reverse gear and high gear clutch, or an issue with the brake. When encountering such problems, it is best to send the vehicle for inspection immediately to minimize damage to the transmission. Normally, when shifting into reverse gear, it is important to ensure the vehicle is completely stopped before engaging reverse gear, otherwise it can easily cause the vehicle to shake after shifting into reverse.
11
3
Share

Which car brand has a pentagram logo?

The pentagram logo represents Jianghuai Automobile (JAC). Jianghuai Automobile offers a variety of models including MPVs, SUVs, and sedans. Among them, the JAC Refine S3 is a compact SUV with a wheelbase of 2560 mm and dimensions of 4345 mm in length, 1765 mm in width, and 1640 mm in height. In terms of powertrain, the JAC Refine S3 is equipped with two engines: a 1.5-liter naturally aspirated engine delivering 113 horsepower and 146 Nm of maximum torque, and a 1.6-liter naturally aspirated engine producing 120 horsepower and 150 Nm of maximum torque.
7
0
Share

How Long Can You Drive When the Oil Warning Light Comes On?

When the oil warning light comes on, you can drive for a maximum of 60 kilometers. Insufficient engine oil can cause mechanical damage to the engine. In chain-driven engines, the timing chain is guided by rails, which are tensioned by hydraulic cylinders powered by pressurized oil. The pressure is proportional to the engine speed. There are three scenarios for oil pressure warnings: 1. The warning appears during engine startup and disappears shortly after normal startup. 2. High-temperature warning, where the alert does not appear during startup but occurs during normal or high-speed operation. 3. Continuous warning, where the alert persists from startup through operation. Oil pressure warnings are not only related to the quality of the lubricating oil but also closely tied to the engine's condition. Factors such as the car's age, mileage, clearance size, and the working condition of the oil pump and auxiliary systems must all be thoroughly inspected, analyzed, and evaluated.
17
1
Share

How Long Can the Annual Vehicle Inspection Be Delayed?

Vehicle annual inspection can be done in advance but not postponed. If the inspection is overdue, the vehicle owner will be fined 200 yuan and receive 3 penalty points by the traffic police department. The consequences of overdue annual inspection are as follows: 1. The traffic police have the authority to impound the vehicle, impose fines, and deduct points. If an uninspected vehicle is found on the road, the traffic police department will temporarily seize the vehicle and, according to the "Road Traffic Safety Law of the People's Republic of China," impose a fine of up to 200 yuan and deduct 3 points from the driver's license. 2. Insurance will not cover accidents. Some people may skip the annual inspection to avoid paying vehicle and vessel tax or compulsory traffic insurance. According to the relevant provisions of the "Road Traffic Safety Law," if an uninspected vehicle is involved in a traffic accident, the insurance company has the right to refuse any compensation.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.